I have re-installed all the loadlibs into another volume. So far so good.
Regards Lim ML
On 14-May-12 3:32 PM, Elardus Engelbrecht wrote:
Ed Gould wrote:
I guess I would link it to a temporary data set ie
// exec pgm=iewl,parm='list,xref,map'
Very very interesting way to test a mod,
I need some lesson on reducing Common Area below the 16M line.
Anyone can give me some 101 on increasing the private area size below
16M line ?
Or any guides or manual will help me to embark on this ?
--
Regards Lim ML
--
For
Thanks, Edward.
Using the IPCS to view the Virtual Storage Map, and misc tips.
I have adjusted the CSA parameter in the IEASYSxx, to give some storage
relief in the below 16M private area.
Regards Lim ML
On 14-May-12 8:10 AM, Edward Jaffe wrote:
On 5/13/2012 8:24 AM, Lim Ming Liang wrote:
I
Pardon my ignorance, where can I get this
Mods Tape
You referring to ?
Regards Lim ML
On 12-May-12 11:57 AM, Skip Robinson wrote:
Mods Tape
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Hi Scott,
This modules are from ca software. It works in other LPARs, so I suspect
it's hardware related, I can't tell for sure.
I can DFDSS dump them and iebcopy them.
So need some advice to validate it, before I re-install them into
another volume.
Regards Lim ML
On 12-May-12 11:59 AM,
Hi,
I had quite a few similar error messages on load modules fetching
problem on a same volume;
DSINIT FROM DDNAME STEPLIB FAILED BECAUSE
IEWFETCH ISSUED RC 0D AND REASON 00
On the System Messages manual;
IEW4005I FETCH FOR MODULE program-name FROM DDNAME ddname FAILED BECAUSE
IEWFETCH
you are looking for is in Chapter 5, STATEMENTS, on page 1086
(p. 1112 in the PDF's own numbering system).
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Lim Ming Liang
Sent: Saturday, April 07, 2012 12:33 PM
To: IBM-MAIN@bama.ua.edu
Hi,
I am new in DB2.
Looking for the reference documentation on DB2 DDL, I am looking for the
syntax of Creating Storgrp.
I am searching through the IBM DVD Docs on DB2, no luck.
--
Regards Lim ML
--
For IBM-MAIN subscribe /
On 08-Apr-12 4:22 AM, Steve Comstock wrote:
On 4/7/2012 10:33 AM, Lim Ming Liang wrote:
Hi,
I am new in DB2.
Looking for the reference documentation on DB2 DDL, I am looking for
the syntax
of Creating Storgrp.
I am searching through the IBM DVD Docs on DB2, no luck.
IBM docs on the Web
On 08-Apr-12 11:04 AM, Lim Ming Liang wrote:
On 08-Apr-12 4:22 AM, Steve Comstock wrote:
On 4/7/2012 10:33 AM, Lim Ming Liang wrote:
Hi,
I am new in DB2.
Looking for the reference documentation on DB2 DDL, I am looking for
the syntax
of Creating Storgrp.
I am searching through the IBM DVD
On 08-Apr-12 11:43 AM, Ed Finnell wrote:
Some of the DB/2 Redbooks are excellent if you need more info...
In a message dated 4/7/2012 10:41:27 P.M. Central Daylight Time,
limm...@unifi.my writes:
FOUND that in DB2 Version 9.1 for z/OS SQL Reference, Chapter 5 Statements
On 16-Mar-12 12:03 AM, gsg wrote:
Just want to thank everyone for your comments. I think the consensus is to not
use Endevor for system type changes. I realize this would cause a lot of pain
and reduce productivity.
My next questions is how does your shop handle making system changes or
On 15-Mar-12 1:29 AM, gsg wrote:
Is anyone out there using CA-Endevor? Do you manage your system changes using
Endevor? If so, how are you doing this and was it hard to setup?
We are looking into this, but there are so many system libraries that could be
changed, it needs a lot of thought
Hi Lizette,
Are you willing to share that with us ?
Regards Lim ML
On 08/02/12 7:42 AM, Lizette Koehler wrote:
Never Mind, I found Mark Zelden's code in my notes files.
Thanks anyway.
Lizette
-Original Message-
From: Lizette Koehlerstars...@mindspring.com
Sent: Feb 7, 2012 4:46 PM
Are you looking for some kind of debugging tools, or QA methodology in
the z/OS ?
Regards Lim ML
On 06/02/12 12:47 PM, Mohd Rizwan wrote:
Hi Friends,
Can anybody tell me about Mainframe testing, what are the tools are used
for Mainframe system testing
Is it system load testing you're looking for ?
Regards Lim ML
On 06/02/12 2:56 PM, Tsai Laurence wrote:
Wsim aka TPNS
2012-2-6 下午1:12 於 Mohd Rizwan rizwaan.pa...@gmail.com 寫道:
Hi Friends,
Can anybody tell me about Mainframe testing, what are the tools are used
for Mainframe system testing
CA-JARS ?
Regards Lim ML
On 11/01/12 8:58 PM, Sérgio Lima Costa wrote:
Hello List,
Someone know, if have a product to produce account reports from ZOS ?
Our system, is ZOS 1.12.
Thanks very much.
Atenção: Esta mensagem foi enviada para uso exclusivo do(s)
Hi,
Anyone know how to enable the REPLY being displayed on the syslog ?
--
Regards Lim ML
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Looks like I need to talk to the OPS/MVS admin guy.
Thank you.
Regards Lim ML
On 10/12/11 11:28 AM, Lizette Koehler wrote:
Hi,
Anyone know how to enable the REPLY being displayed on the syslog ?
--
Regards Lim ML
What is issuing the WTOR?
Do you have any MPF or automation handing the WTOR?
Yes, I need to talk to the OPS guy which issue wtor.
Thank you.
Regards Lim ML
On 10/12/11 12:04 PM, John McKown wrote:
If the WTOR has a routcde of 9 (security), the the reply is not displayed
and you see the SUPPRESSED in the log. The only way that I can think of to
get around this is some
Anyone in the list has working experience in Fidelity Systematic Core
Banking System's IU utility ?
And willing to share the knowledge of what does it used for, how does it
work in z/OS environment ?
--
Regards Lim ML
--
For
Jagadishan,
If you're looking for an Enterprise Data Transport solution, you should
evaluate Connect:Direct together with XCOM from CA Technologies. Both of
these are being used in the Banks at this region.
http://www.ca.com/us/products/detail/CA-XCOM-Data-Transport.aspx
/11 3:52 AM, Rick Fochtman wrote:
Lim Ming Liang wrote:
Hi,
I have jes2parm lines of;
000508 OUTCLASS(Q) BLNKTRNC=YES,/*
000509 OUTDISP=(WRITE,WRITE),
000510 OUTPUT=PRINT, /*
000511 TRKCELL=YES /*
000512 /*
but when I run
Hi Ravi,
This is the running JCL;
//SARINITJOB CLASS=A,MSGLEVEL=(1,1),MSGCLASS=Q,
// NOTIFY=SYSUID
//*
//INIT EXEC PGM=SARINIT
//STEPLIB DD DSN=SYS3.VIEW.R116SP0.CAILIB,DISP=SHR
//SYSPRINT DD SYSOUT=*
//SYSINDD *
NAME=SYS3.VIEW
CLSL=QJ
NEWCLSL=WW
/*
and the output of
$D O
Hi Ravi,
Yes, you're right SAR is capturing CLASS=Q, somehow the JESMSGLG and
msglog not being archived to SAR.
From another source, I found that OUTDISP parameter in JOBCLASS
statement in JES2 parm has a part in it too. It caused the system data
sets for jobs in that class to be HOLD which
Myers
On 10/07/2011 11:33 PM, Lim Ming Liang wrote:
I depend on the size of the ordered contents, you may have to build a
?GB size of USS dir to contain the uploaded contents from the DVDs,
at the Driver system.
When you install the ServerPac new z/OS target system, it can go to
3390-3, 3390-9
Hi,
I have jes2parm lines of;
000508 OUTCLASS(Q) BLNKTRNC=YES,/*
000509 OUTDISP=(WRITE,WRITE),
000510 OUTPUT=PRINT, /*
000511 TRKCELL=YES /*
000512 /*
but when I run a job with msgclass=q, in sdsf the job output show ODisp
Hi Ravi,
I checked JES2 Init Tuning Ref, I can't find the keyword $DOUTCLASS.
In which manual this keyword usage is documented ? If you don't mind I
am asking.
Regards Lim ML
On 07/10/11 5:03 PM, Ravi Gaur wrote:
can you try $DOUTCLASS(Q) and post output here..
System Commands
for more information on using the ROUTE *ALL command.
Messages
The $HASP842 message is issued in response to this command.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf
Of Lim Ming Liang
Sent: Friday, October 07, 2011 4:29 AM
Hi Ravi,
I am not running in a sysplex environment.
The running jobcard,
//SARINITJOB CLASS=A,MSGLEVEL=(1,1),MSGCLASS=Q,
// NOTIFY=SYSUID
and the output shown in sdsf;
SDSF HELD OUTPUT DISPLAY ALL CLASSES LINES 51 LINE 1-1 (1)
COMMAND INPUT ===
Nowaday, the IBM z/OS installation media are shipped with ServerPac DVDs.
But you do need a supported z/OS Driver system to kick-start the
installation, the whole process no tape drive involved .
Regards Lim ML
On 07/10/11 8:45 PM, Roger Bowler wrote:
Timothy Sipples wrote:
A tape drive is
:
W dniu 2011-10-07 15:10, Lim Ming Liang pisze:
Nowaday, the IBM z/OS installation media are shipped with ServerPac
DVDs.
But you do need a supported z/OS Driver system to kick-start the
installation, the whole process no tape drive involved .
Regards Lim ML
In simple words, a *new* z/OS
:29 AM, Mike Myers wrote:
Lim:
I've heard a little about this new delivery method. What size are the
DASD images on the DVD (3390-3, 3390-9, or 3390-27)?
Mike Myers
On 10/07/2011 09:10 AM, Lim Ming Liang wrote:
Nowaday, the IBM z/OS installation media are shipped with ServerPac
DVDs.
But you
-27)?
Mike Myers
On 10/07/2011 09:10 AM, Lim Ming Liang wrote:
Nowaday, the IBM z/OS installation media are shipped with ServerPac
DVDs.
But you do need a supported z/OS Driver system to kick-start the
installation, the whole process no tape drive involved .
Regards Lim ML
On 07/10/11 8:45 PM
I encountered an error loading /usr/lpp/java/J1.4/bin/classic/libjvm.so
in one of the product SMPE apply processing.
: EDC5157I An internal error has occurred. (errno2=0x0BDF019B)
When I used ISHELL to list that file, I got error code,
EUID=0 /Z19/usr/lpp/java/J1.4/bin/classic/
Type
Most of the CA products are now shipped in Enhanced ESD format, you
can download them from the CA Support web site, of course with
registered userid. Those product downloaded files are in the format of
*.pax.Z, you have to shoot it up to the USS dir, and then use GMUNZIP to
unpax it to MVS
Back in the XA time, I used a SMFDUMPT from the SYS1.SAMPLIB to do that.
Couldn;t find that being shipped in the newer zOS.
Now a days, most of the shops will use Automation product to address that.
Regards Lim ML
On 21/09/11 5:33 PM, ibmnew wrote:
Hi all
When we shutdown our z/OS 1.11
That will be handy.
Thank you so much.
Regards Lim ML
On 18/09/11 7:16 AM, Jim Holloway wrote:
I wrote the following rexx exec to determine what mode we were in, back
when we transitioned from 32 to 64 bit
machines.
/* REXX
Thanks.
Regards Lim ML
On 16/09/11 1:04 PM, R.S. wrote:
W dniu 2011-09-16 06:52, Lim Ming Liang pisze:
How do I identify a particular running z/OS is 32-bit or 64-bit ?
It's easy: it is always 64-bit.
There is small chance that you find 31-bit machine (9672) and z/OS 1.4
or eralier
How do I identify a particular running z/OS is 32-bit or 64-bit ?
--
Regards Lim ML
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search
I tried that with SYSUT1 ddname, but GIMUNZIP still dynamically allocate it.
Regards Lim ML
On 14/09/11 3:43 PM, amit wrote:
hi Lim,
my advise would be to add some TEMP datasets within the JCL... you can
hardcode the Volser with a disp of Delete, Delete.
this util allocates space from TEMP as
added volume parameter in the ARCHDEF, resolved the issue.
I think I can close this thread.
Thank you all.
Regards Lim ML
On 14/09/11 5:47 PM, amit wrote:
add volume parameter in
the
ARCHDEF.
--
For IBM-MAIN subscribe /
Hi Bill,
Much obliged on the updates.
Regards Lim ML
On 13/09/11 1:24 AM, Bill Godfrey wrote:
GIMUNZIP might be trying to allocate a Large Format sequential data set
(DSNTYPE=LARGE) rather than a PDSE. I say that because at this web page:
That description not really fit the problem I am having here.
I googled and found an archived back in Feb did talked about this
messages I am having, and the resolution is add volume parameter in the
ARCHDEF.
Yes, it did help to get the job going, but I wonder wh., All those
extracted Data
Hi Bill,
PDSE cannot be VIO , is it a DFSMSdfp software constraint ?
GIMUNZIP is trying to allocate a PDSE on VIO for SYSUT1 , is it an
software action taken by GIMUNZIP to dynamically allocate SYSUT1 with VIO ?
Or is it my system setup for VIO allocation causing the problem ?
Pardon me, I
Hi,
I run GIMUNZIP,
--GIMUNZIP
-- ARCHDEF
--archid=AAOPEXEC.100
--newname=TRX4.AOP.AAOPEXEC
-- /
and encountered error messages;
** ALLOCATION FAILED FOR SYSUT1 - IKJ56893I FILE SYSUT1 NOT ALLOCATED+.
GIM54701S ** ALLOCATION FAILED FOR
Sure.
//UNZIP#01 EXEC PGM=GIMUNZIP,COND=(4000,LT)
//SMPDIR DD PATHDISP=KEEP,
// PATH='/u/cpac/ST126014.content'
//*
//SMPWKDIR DD PATHDISP=KEEP,
// PATH='/tmp'
//SMPOUT DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SYSUT3 DD UNIT=SYSALLDA,SPACE=(CYL,(50,10))
//SYSUT4 DD
As in B+ Tree Data Structure, too many CI CA Splits cause the Index
level increased, and it is bad for random access which has to walked the
Index tree to get to the target records at the root level, i.e. more
I/Os involved to search a record.
VSAM Repro, Export/Import, will get the Index
Very much of indeed.
Regards Lim ML
On 27/08/11 2:45 PM, Edward Jaffe wrote:
On 8/26/2011 3:28 PM, Gene Hudders wrote:
I guess IBM did not get the message. Look at this URL. It clearly states
MVS just under Metal C. This is for z/OS R12.
MVS is still part of z/OS.
CA Wily or IBM ITCAM may help.
Regards Lim ML
On 23/08/11 9:19 PM, David Crayford wrote:
Are there any monitoring tools that can show the complete transaction
life history through, for example, a zLinux WAS server into z/OS
CICS/DB2/IMS etc.
There seems to be a boundary where the two worlds
I have successfully created the multi-volume LDS;
DEFINE CLUSTER (NAME(ZFS.Z112S.CPAC) -
VOLUMES(ZFS001 ZFS002-
ZFS003 ZFS004 )-
DATACLAS(DCZFS) -
LINEAR CYL(10014 5) SHAREOPTIONS(3))
I am doing this the first time without in-depth understanding of it.
I am following the zFS Administration Guide, Chapter 4 as an example.
I will define VVDS on those volumes first, see any changes affected.
Regards Lim ML
On 08/08/11 10:00 PM, Mark Zelden wrote:
On Mon, 8 Aug 2011 21:40:11
I defined VVDS for the rest of the volumes.
Now I get this;
IOEZ4I Formatting to 8K block number 169020 for primary extent of 734
ZFS.Z112S.CPAC.
IOEZ5I Primary extent loaded successfully for ZFS.Z112S.CPAC.
IOEZ00323I Attempting to extend ZFS.Z112S.CPAC to 1070280 8K blocks.
IGD17272I
2011 13:26:18 -0700, Schwarz, Barry Abarry.a.schw...@boeing.com
wrote:
Does the DCZFS data class specify a volume count?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Lim Ming Liang
Sent: Monday, August 08, 2011 6:40 AM
To: IBM-MAIN
('ZFS.Z112S.CPAC') ALL
Regards,
Kevin
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Lim Ming Liang
Sent: Monday, August 08, 2011 7:52 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Creating a multi-volume compatibility mode aggregate, zFS
I defined VVDS
Hi Mark,
I did as you suggested and getting somewhere now;
IGD17070I DATA SET ZFS.Z112S.CPAC
ALLOCATED SUCCESSFULLY WITH 1 STRIPE(S).
IGD17172I DATA SET ZFS.Z112S.CPAC
IS ELIGIBLE FOR EXTENDED ADDRESSABILITY
IDC0508I DATA ALLOCATION STATUS FOR VOLUME ZFS002 IS 0
IDC0508I DATA ALLOCATION STATUS
Hi Chuck !
Regards Lim ML
On 05/08/11 8:05 PM, Hardee, Charles H wrote:
I received it thru the list.
Haven't received one privately, yet.
Charles Hardee
CA technologies
Sr Sustaining Engineer
Tel: +1-952-838-1039
charles.har...@ca.com
-Original Message-
From: IBM Mainframe
Hi,
I am new in DFSMS, trying to do a validate against my SCDS, got a
warning msg
IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP
ACS ROUTINE
But in Storage Group ACS routine as below;
PROC STORGRP
I just woke up in the morning, and found so many replies on this issue I
raised.
This is a wonderful forum list, I learn a lot from here, considered just
joined days ago.
Thank you to all the guys here. Much obliged.
Regards Lim ML
On 05/08/11 5:20 AM, Scott Rowe wrote:
Ah, but I prefer to
Hi Dave,
You hit the jackpot on this.
I got it resolved.
Thank you so much.
Regards Lim ML
On 05/08/11 12:59 AM, Gibney, Dave wrote:
Starting with:
WHEN (HLQ =ZFS_HLQ) /* MANAGE MULTI VOLUME ZFS DATA SETS
It's all comment until the */ on the last line.
Dave Gibney
Information Technology
Administration (SC26-7402).
Regards,
Kevin
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Lim Ming Liang
Sent: Tuesday, August 02, 2011 6:01 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: zFS Data Set 4G
Defining Data Class EXT in ISMF is what
Hi,
Need some help on defining zFS file system 4GB.
I tried that with ISHELL, but failed with msg;
IDCAMS SYSTEM SERVICES TIME:
18:40:1
508/02/11 PAGE 1
DEFINE CL -
(NAME(ZFS.Z112S.CPAC) LIN SHR(3,3) -
CYL(8000 500) -
VOL(ZFS111
I am a newbie in SMS, I do not see any construct being defined in the
ISMF Data Class.
Will you tell me how to get there?
Regards Lim ML
On 02/08/11 7:16 PM, Ravi Gaur wrote:
can you check the dataclass for the dataset being allocated ? please specify
the dataclass which make dataset eligible
Vice President, Mainframe Services
david.jou...@53.com
1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H
p 616.653.8429
f 616.653.2717
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Lim Ming Liang
Sent: Tuesday, August 02, 2011 6:49 AM
What is the maximum allowable size per extent ?
I am working on how to define a Data Class in ISMF .. or somewhere
else.. still new in this DFSMS area ..
Regards Lim ML
On 02/08/11 8:38 PM, Anson Ye wrote:
I think there is at least one issue in your data set creation command... The data set
You probably will get me somewhere.
I am still learning how to define a Data Class in ISMF, which IBM Guide
I can refer to ?
And the ACS code stuff, any documentation ?
Regards Lim ML
On 02/08/11 9:59 PM, Lizette Koehler wrote:
Go to ISMF Panels under ISPF.
List the dataset you are trying to
Thank you, looking at it now.
Regards Lim ML
On 03/08/11 12:33 AM, Neubert, Kevin wrote:
Take a look at DFSMS Implementing System-Managed Storage (SC26-7407).
Regards,
Kevin
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Lim Ming
at DFSMS Implementing System-Managed Storage (SC26-7407).
Regards,
Kevin
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Lim Ming Liang
Sent: Tuesday, August 02, 2011 7:51 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: zFS Data Set 4G
You
68 matches
Mail list logo