Chen Jiang writes:
change-configuration {
retry count 3 interval 1;
commands {
set interface ge-1/0/0 description test;
Try changing interface to interfaces in this line. The
commands need to be explicit/exact.
Thanks,
Phil
Hey all,
Got a problem here I'm hoping someone can help with.
Client - M-series (relay) - (VLAN 2920) J-series (VLAN 100) - Server
Server - (VLAN 100) J-series (VLAN 2980)
inet6.0 on the M knows to reach the DHCPv6 server via VLAN 2920, the J-series
dutifully forwards the packets to the
Le 20/04/15 17:27, Raphael Mazelier a écrit :
In my opinion rib-groups have a more complex syntax than auto-export
wich seems natural to me. Anyway with the help of this documentation and
templating feature of junos, I ll be able to make a relatively clear
configuration.
Me again. I'm
Hi! Experts
I tried to use event-options to change the JUNOS configuration but there is
some issue, are you experience the same issue and could shed some light on
this.
Thanks for your help!
lab@r1# show event-options
generate-event {
Configure-Ot-Change time-of-day 21:44:00 +0800;
}
policy
Hi Experts,
Can you please help me to enable echo mode of BFD protocol. The BFD session
wich i try to make is between a juniper router and an alcatel omniswitch
(which support only bfd echo mode for static routes)
The software version of juniper router is 12.3R2-S2
Thank you for your help
Yes, I have tried the same manual configuration through lab user and it
works fine.
On Wed, Apr 22, 2015 at 12:43 AM, Pallavi Mahajan pall...@juniper.net
wrote:
Have you tried checking if the user ‘lab’ can invoke the ‘set interface’
config knob from the CLI?
Thanks,
Pallavi
On 21/04/15
Thanks Phil and sorry for my mistake, I should use interface instead of
interfaces, it works now.
On Wed, Apr 22, 2015 at 3:08 AM, Phil Shafer p...@juniper.net wrote:
Chen Jiang writes:
change-configuration {
retry count 3 interval 1;
commands {
hi cahit
have you enabled any screens on the interface under attack?
regards
farrukh
On Tue, Apr 21, 2015 at 7:22 PM, Cahit Eyigünlü cahit.eyigu...@spd.net.tr
wrote:
We are getting a spoofed ip syn attack. When attack starts and over 100K
pps our SRX3600 was losting the connection. And we
Doing more testing I am seeing bad hashing with UDPv6 traffic, TCPv6
traffic looks OK. Maybe it is just that UDP header is not parsed correctly.
On 4/21/15 09:34, Anton Yurchenko wrote:
Hi,
I am using the -P option for iperf, it does vary source port dst port
is the same though. Normally
Hi,
Under that inet6 stanza you can only turn off certain fields to be used
for hashing. I tried playing with them with no visible effect.
Asking on this list cause I almost feel this kind of issue would not go
unnoticed for so long and that maybe my test setup is wrong.
Thanks for your
We are getting a spoofed ip syn attack. When attack starts and over 100K pps
our SRX3600 was losting the connection. And we check the status of the device
over the Serial connection. But we could not determine why it has been dropped
the connection
Should somebody help us to over come this
Hi,
I am using the -P option for iperf, it does vary source port dst port is
the same though. Normally (and with v4) traffic it results in good
hashing behavior.
Thanks,
On 4/18/15 07:21, Michael Loftis wrote:
On Friday, April 17, 2015, Anton Yurchenko ayurche...@gmail.com
Have you tried checking if the user ‘lab’ can invoke the ‘set interface’
config knob from the CLI?
Thanks,
Pallavi
On 21/04/15 9:10 pm, Chen Jiang iloveb...@gmail.com wrote:
Hi! Experts
I tried to use event-options to change the JUNOS configuration but there
is
some issue, are you experience
13 matches
Mail list logo