What I like to do if it is a tight turn is to work to the inside of the curve,
do one twist then leave that pair -no pin. **Pick up the last passive pair you
worked through and use it as the worker out to the edge and back to the middle
going through all pairs, one twist on the worker. Repeat
Susan
Here are a few links to one of my teaching laces from my website, which uses
the turning stitch I just described in my previous email.
http://lynxlace.com/images-h-det-diag/T14curves.JPG detail
http://lynxlace.com/images/T14.jpgwhole thing
Lorelei
-
To unsubscribe send email to
Susan
Yes, Russian tape lace uses a pivot pin. There are several ways of doing
fudge stitches to help you get around a very tight curve. Sometimes called
"turning stitches". The one that appears in the DMC book on tape lace is the
one I use most, and I describe it on my website.
Yes indeed! In tight places they be used three or four times, if not more!
Clay
Sent from my iPad
> On Jan 5, 2017, at 10:02 AM, Susan wrote:
>
> Does this lace ever use a pivot pin? Or are all turns made like regular tape
> lace? I've got a very tight curve. Many
Hello Noelene,
A teacher of mine who knew some ladies from Wologda exolained it to me.
They have there very long and big rolls bigger then those from
Erzgebirge. And on those big lace-pieces are two or more lacers working
at the same time.
Hope this helps.
Greetings
Ilske
-
To unsubscribe
That's how I saw it done in Poland too, except that the bolster pillows
were even bigger.
Weronika
On Thu, Jan 19, 2006 at 01:35:28PM +0200, Pene Piip wrote:
Noelene, here is the web-site of a Russian lacemaker who lives in Narva,
Estonia. She uses a big bolster pillow handles the bobbins
I have seen large mats done both on a large pillow and by using just a segment
(slightly over 1 repeat) on a smaller pillow. Sometimes the pricking itself
might determine how one did it.
Using a pricking segment would not be much different than 'moving up' on
yardage pieces. Well, maybe a few
I don't know for sure but I think such mats could be made on bolster
pillows, which give more leverage on making the bigger pieces. You can
have quite a long, round bolster, and/or you can move the pattern
about as required. Or - you build on the lace in units or piecework.
Does anyone know
Thank you, Noelene, for pointing us to that website! The pictures were
stunning, and I can well understand your interest in learning more about
how to make this lace! I'll be interested to see the answers others have
for you!
Clay
Clay Blackwell
[EMAIL PROTECTED]
Late last year I did a