Thanks for the replies I got for the EPEL-thread (
http://www.mail-archive.com/linux-390@vm.marist.edu/msg53425.html) I posted.
In January I posted some questions on the Red Hat mailing list, asking about
EPEL (amongst other things). This is the post:
Yes you are right, it's all about negotiating with the vendor.
And as you say also , the size can make a big difference.
Cordialement / Vriendelijke Groeten / Best Regards / Med Vänliga Hälsningar
Tore Agblad
Volvo Information Technology
Infrastructure Mainframe Design Development
Hi all,
I'm having problems logging on to my SLES 10 system.
I originally had this system running as a LPAR some months ago, before
installing VM.
I have now defined a VM Guest (LINUX00), attached the DASD I had for the
LPAR to the guest, and successfully IPL'd SLES 10.
On the Linux
Does there exist any linux live CD's for z/Linux?
The closest thing I know of is the starter system for SLES10.
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the
On Tue, Jun 23, 2009 at 4:03 PM, Vincent
Getgoodvincent.getg...@xchanging.com wrote:
Module is unknown
Then get thrown back to the logon prompt.
Smells like one of the pam modules may not be there. Did you maybe
have a security person / tool enforce some of his popular settings in
the pam
Looks like someone changed /etc/security/limits.conf or pam configuration...
This happens when following Oracle's documentation on Oracle 10g install for
s390x.
To solve this, you have to connect by ssh and get rid of the failing module
(/var/log/messages can tell you what to remove).
Mauro
We rolled our own recovery Linux system (aka virtual live cd). We simply
created a guest with a minimal Linux install and no LVM. Then via the beauty of
shared disk, if a system fails we just shut down the failed guest and link our
recovery system's disk to the guest as well. We IPL from the
I ran into this same problem when trying to logon to the VM console.
There is an error in the Oracle install doc.
Last week after my change I was unable to logon the
server on the console directly. I found that in February I was asked to
make this change
Add the following line to the
You have Oracle running.
Look in the recent archives for Module is unknown when signing on.
Tom Duerbusch
THD Consulting
Vincent Getgood vincent.getg...@xchanging.com 6/23/2009 9:03 AM
Hi all,
I'm having problems logging on to my SLES 10 system.
I originally had this system running
Hi,
I am trying to tar several directories to an LTO-3 tape using lin_tape,
IBMtapeutil and tar.
I open the tape device and then issue the tar commands. When I check
the tape contents with tar tvf, I only see the last directory.
I am not sure if I am not using the tar command correctly or if
On Tuesday 23 June 2009 11:51, Spann, Elizebeth (Betsie) wrote:
I am trying to tar several directories to an LTO-3 tape using lin_tape,
IBMtapeutil and tar.
I open the tape device and then issue the tar commands. When I check
the tape contents with tar tvf, I only see the last directory.
I am
Try using /dev/IBMtape0n. I believe that's the no-rewind node.
-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of
Edmund R. MacKenty
Sent: Tuesday, June 23, 2009 12:21 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: [LINUX-390] Lin_tape and IBMtapeutil
On 6/23/2009 at 2:02 AM, Kenneth Holter kenneho@gmail.com wrote:
-snip-
From the replies I got I was under the impression that EPEL-like repos for
z/Linux allready exists - not necessarily z/Linux packages within EPEL, but
perhaps a repo similar to EPEL. If anyone knows where to find
On 6/23/2009 at 11:51 AM, Spann, Elizebeth (Betsie) bsp...@visa.com
wrote:
-snip-
IBMtapeutil -f /dev/IBMtape0 rewind
tar cvf /dev/IBMtape0 /directory1
tar cvf /dev/IBMtape0 /directory2
You're telling the tar command to create a new archive each time. I suspect
that tar is issuing a
Thank you for your input. I'm going to try them now.
Betsie
-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of
Mark Post
Sent: Tuesday, June 23, 2009 9:51 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Lin_tape and IBMtapeutil
On 6/23/2009 at 11:51
Hi,
I'm in the process of rebuilding packages now. EPEL packages for z have
never existed, but if all goes well they could be released soon.
fyi, this requires a dedicated z guest for compiles/builds (which I
already have), and integration into the current EPEL infrastructure
(which I'm
Within the past week, the developers of a new JBOSS application have run some
batch tests of their application on our z9 ifl (the Linux guest is configured
with 6 GB memory, 2 cpus, SLES 10 sp1, Apache JBOSS 4.2.2, IBM JAVA 1.6) as
well as on a IBM Blade server VM (the Linux machine is
Borrow a Java profiling tool and have a look at what the application is doing.
That's a very unusual usage pattern. Check the frequency of garbage collection
and heap sizes. Also, is the blade running multiple guests? Sounds like not;
apples vs oranges comparison, then.
Hi list,
i am working on the parmfile for automated installation of sles11.
when omitting the portno in the parmfile, i will get the prompt during ipl.
leaving the answer blank or entering 0 works fine and installation image
comes up. but when specifying portno=0 in the parmfile, i will get
On 6/24/2009 at 1:19 AM, Tobias Doerkes tdoer...@hotmail.com wrote:
Hi list,
i am working on the parmfile for automated installation of sles11.
when omitting the portno in the parmfile, i will get the prompt during ipl.
leaving the answer blank or entering 0 works fine and
20 matches
Mail list logo
