13, 2006 6:18 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: PuTTY Question
Importance: Low
Thomas Kern wrote:
It should not be too hard to create a myyast script to set
TERM=linux, run yast
and reset TERM to its original value. Then mc gets to work
with TERM=xterm and
yast sees its TERM
-Original Message-
From: LINUX-390@VM.MARIST.EDU
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, October 12, 2006 5:08 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: PuTTY Question
Give TERM=linux (and change it in Putty) a try (along
withUTF-8 translation).
It'll
PROTECTED]
gov Ray.Mrohs To: LINUX-390@VM.MARIST.EDU
Sent by: Linux oncc:
390 Port Subject: Re: PuTTY Question
[EMAIL PROTECTED]
IST.EDU
Quoting [EMAIL PROTECTED] [EMAIL PROTECTED]:
Yes, that fixes the graphics problem. Only I lose the mouse support in
mc. I found that I can leave TERM=xterm in both places, and just make
TERM=linux when running YaST. I just have to remember to make that
setting before I run YaST.
Well, that's
It should not be too hard to create a myyast script to set TERM=linux, run yast
and reset TERM to its original value. Then mc gets to work with TERM=xterm and
yast sees its TERM=linux setting. It doesn't matter that PuTTY still thinks it
is using xterm.
/Tom Kern
--- Leland Lucius [EMAIL
PROTECTED]
Reply-To: Linux on 390 Port LINUX-390@VM.MARIST.EDU
To: LINUX-390@VM.MARIST.EDU
Subject: Re: PuTTY Question
Date: Fri, 13 Oct 2006 09:30:21 -0700
It should not be too hard to create a myyast script to set TERM=linux, run
yast
and reset TERM to its original value. Then mc gets to work with TERM
On Friday 13 October 2006 12:30, Thomas Kern wrote:
It should not be too hard to create a myyast script to set TERM=linux, run
yast and reset TERM to its original value. Then mc gets to work with
TERM=xterm and yast sees its TERM=linux setting. It doesn't matter that
PuTTY still thinks it is
Chaplin, James wrote:
There is no mouse support in YaST when using Ncurses. When you uses Putty
terminal to access YAST, you accessing the Control Center through Ncurses
interface, which does not support a mouse, only the TAB key.
And ALT-key accelerators.
Note, not all yast tools work in
Thomas Kern wrote:
It should not be too hard to create a myyast script to set TERM=linux, run yast
and reset TERM to its original value. Then mc gets to work with TERM=xterm and
yast sees its TERM=linux setting. It doesn't matter that PuTTY still thinks it
is using xterm.
In .bashrc or
I want to get PuTTY to display YaST and mc file manager properly. Right
now the line drawings only work for one or the other via setting
translation in PuTTY to either ISO-8859-1 or UTF-8. If I ssh to SLES10
from another Linux terminal they both display OK. Is there another
setting in PuTTY that
Hi,
PuTTY is able to work perfectly with Linux on the Z, but there is some
parameters to set.
My settings are :
In Terminal, check Use background color to erase screen. This will allow
you a pretty drawing of ncurses applications like YaST and mc. This is a
must, otherwise the background will
.
Ray Mrohs
U.S. Department of Justice
202-307-6896
-Original Message-
From: LINUX-390@VM.MARIST.EDU
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, October 12, 2006 10:31 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: PuTTY Question
Importance: Low
Hi
. Department of Justice
202-307-6896
-Original Message-
From: LINUX-390@VM.MARIST.EDU
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, October 12, 2006 10:31 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: PuTTY Question
Importance: Low
Hi,
PuTTY is able to work
Subject: Re: PuTTY Question
I am also using version .058 and the configuration settings are the same
as yours. What is your translation setting in PuTTY and $LANG on Linux?
I read something about making a change to YaST so I can use the UTF-8
translation, but I don't want to start making alterations
U.S. Department of Justice
202-307-6896
-Original Message-
From: LINUX-390@VM.MARIST.EDU
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, October 12, 2006 10:31 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: PuTTY Question
Importance: Low
Hi
Quoting [EMAIL PROTECTED] [EMAIL PROTECTED]:
I want to get PuTTY to display YaST and mc file manager properly. Right
now the line drawings only work for one or the other via setting
translation in PuTTY to either ISO-8859-1 or UTF-8. If I ssh to SLES10
from another Linux terminal they both
You need to save the session.
On the main page, you input a session name in the Saved Sessions field, then
push the Save button.
To load this session, double-click on the session in the list or select it,
then press the Load button, then click OK.
I prefer to launch PuTTY from the command line
Quoting LJ Mace [EMAIL PROTECTED]:
I too use putty and thought the change to 2000 lines
would be great. So I wnet into putty and made the
change , but when I get out of putty the changes don't
stick.
So my question is how do you make the changes stay??
thanks
Isn't that frustrating?!?!?!
TERM=xterm in both situations.
Ray Mrohs
U.S. Department of Justice
202-307-6896
-Original Message-
From: LINUX-390@VM.MARIST.EDU
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, October 12, 2006 3:06 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: PuTTY
Quoting [EMAIL PROTECTED] [EMAIL PROTECTED]:
TERM=xterm in both situations.
Give TERM=linux (and change it in Putty) a try (along withUTF-8 translation).
It'll probably work a bit better.
Leland
--
For LINUX-390 subscribe /
If you save a session named Default Settings then they become the new
Default settings. I wouldn't know how to put them back to the original if
you mess something up.
tom
- - - - - - - - - - - -
Toto, I have a feeling we're not in the mainframe world any more.
_/) Tom Shilson
Every sessions saved in PuTTY are saved into the Windows Registry.
(Don't remember the exact location - on a Mac right now)
You can backup the registry branch, try a little and if it does not
fit your needs, just rollback.
It is also a good way to move your session settings from one computer
to
22 matches
Mail list logo