Hello list,
I finally got SLES10 RC 3 installed. Thanks to William Scully for
recommending to take out the InstNetDev, OsaInterface and OsaMedium
parameters. That was the only way I was able to get out of the starting
gate. Hopefully SuSE will fix that before GA.
It did install with the iso
, July 05, 2006 1:29 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SLES 10 Parmfile Encoding
Hello list,
I finally got SLES10 RC 3 installed. Thanks to William Scully for
recommending to take out the InstNetDev, OsaInterface and OsaMedium
parameters. That was the only way I was able to get out
On Mon, Jul 03, 2006 at 05:13:00PM -0400, Post, Mark K wrote:
For z/VM, it's 11 80-byte card images.
To be on the save side its 10 Lines. The limitation is ~ 860 Characters.
So with 80 Characters per line these are ten lines.
When using the parmfile in an LPAR please terminate each line with
I have success with a SLES 10 parmfile which contains:
ramdisk_size=65536 root=/dev/ram1 ro init=/linuxrc TERM=dumb
Broadcast=141.202.200.255 Gateway=141.202.200.101 HostIP=141.202.200.124
Hostname=linux024.ca.com Install=ftp://130.200.16.136/sles10/cd1
Nameserver=141.202.1.92
I've just had the same experience.
If I don't include manual=1 then the whole thing just hangs during
network initialization.
Mark D Pace
Senior Systems Engineer
Mainline Information Systems
1700 Summit Lake Drive
Tallahassee, FL. 32317
Office: 850.219.5184
Fax: 888.221.9862
Since these relate directly to directory/file names underneath /sys, I'm
not at all surprised.
Mark Post
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Scully, William P
Sent: Monday, July 03, 2006 2:34 PM
To: LINUX-390@VM.MARIST.EDU
Subject: SLES 10
-
In theory, theory and practice are the same, but
in practice, theory and practice are different.
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Scully, William P
Sent: Monday, July 03, 2006 1:34 PM
To: LINUX-390@VM.MARIST.EDU
Subject: SLES 10
For z/VM, it's 11 80-byte card images.
Mark Post
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Nix, Robert P.
Sent: Monday, July 03, 2006 5:02 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: SLES 10 Parmfile Encoding
If I count correctly, and if you
