Re: Curious about crash.
Isn't it complaining about not finding the root filesystem, not about not finding the /boot filesystem? I would take a look at that partition in question that it can't find. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Network Time Protocol Daemon needed for zLinux?
Its celestially motivated. Computers only care about the number of ticks since the start of some arbitrary epoch. P.S. I got the ELO reference. * * -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Linux guests on DR machine not reachable
Default route in /etc/sysconfig/network. On Thu, Oct 30, 2014 at 10:26 AM, Chase, John jch...@ussco.com wrote: No. -jc- -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ambros, Thomas Sent: Thursday, October 30, 2014 9:11 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Linux guests on DR machine not reachable Are you running mproute? Thomas Ambros zEnterprise Operating Systems zEnterprise Systems Management 518-436-6433 -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Chase, John Sent: Thursday, October 30, 2014 10:01 To: LINUX-390@VM.MARIST.EDU Subject: Linux guests on DR machine not reachable Cross-posted to IBMVM and LINUX390 lists Greetings. We're bringing up z/VM and Linux guests for the first time at a D/R exercise. Since we have our own CBU warm site, we create an isolated network to be used for the D/R exercise. The primary internal network is prefixed 10.1 and the isolated D/R network is prefixed 10.2. After z/VM (6.2, non-SSI) IPLs, we logon TCPMAINT and edit PROFILE TCPIP to change the HOME and DEFAULTNET IP addresses from 10.1.xxx.yyy to 10.2.xxx.yyy, then shut down and restart TCPIP. z/VM is now reachable from non-mainframe devices plugged into the isolated network (e.g., Ping from a laptop works fine; 3270 emulator sessions establish via non-ICC ports). Next we login to a Linux (RHEL 6.3 and 6.5) guest (3270 console), where we had pre-configured a clone of the ifcfg-eth0 file to specify 10.2 (instead of 10.1) in all the appropriate places. We rename (mv) the prod and D/R copies so that ifcfg-eth0 now specifies 10.2 instead of 10.1 in all the right places. We stop and restart network services, but Linux is not ping-able from outside. OK let's reboot Linux. No change; still can't ping Linux from outside the mainframe but within the isolated network. OK, we'll just bounce the whole virtual machine (SIGNAL SHUTDOWN followed by XAUTOLOG from OPERATOR). That didn't work, either. We didn't notice any network-related error message as Linux came up again. Not much to go on, but can anybody think of what we might have missed in reconfiguring Linux to play in the isolated (10.2) network? TIA, -jc- ** Information contained in this e-mail message and in any attachments thereto is confidential. If you are not the intended recipient, please destroy this message, delete any copies held on your systems, notify the sender immediately, and refrain from using or disclosing all or any part of its content to any other person. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information. 127 Public Square, Cleveland, OH 44114 If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to mailto:dnereque...@key.com with 'No Promotional E-mails' in the SUBJECT line. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit
Re: Linux file updates by timestamp and userid
If all you want to do is provide some level of individual accountability for users that sudo to root, you can modify root's shell's history file processing to spin off separate history files based off who am i to some arbitrary location like /var/log/sudohistory with timestamps added via HISTTIMEFORMAT. Doesn't stop anybody from doing anything nefarious, but it does answer the age old question Hey.. who updated this configuration file? On Thu, Mar 13, 2014 at 6:32 PM, Shan, Rita rita.s...@penfed.org wrote: Could anyone kindly provide information on how we can monitor/log zLinux file updates by timestamp and by user ID? We have a number of staff maintaining zLinux system all with sudo privilege, we need to have a way to track file updates by date/time/user-ID. Does AIDE provides these kind of detailed level information? What kind of overhead it will generate if we turned it on? Is there an inexpensive vendor tool for this? Any help is greatly appreciated Rita Email transmitted across the Internet is normally not protected and may be intercepted and viewed by others. Therefore, you should refrain from sending any confidential or private information via unsecured email to PenFed. We will not ask you to send confidential information to us via email, such as your logon ID, password, account numbers, or Social Security number. We prohibit our employees from sending confidential information to you via email that is not encrypted. The recommended document submission method is FAX; a partial list of generic fax numbers can be found https://www.penfed.org/aboutUs/contactUs.asp#fax here https://www.penfed.org/aboutUs/contactUs.asp#fax. https://www.penfed.org/aboutUs/contactUs.asp#fax -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: zLinux Question
Its really no different than asking if running Linux in a VMWare environment on rack servers, do you need to have VMWare and rack server expertise? Yes, you do. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Where does Linux store path information for dasd devices?
This may not be of much help, but In our non mainframe environment where we present NAS as SCSI, our filesystems drop into read only when they experience time outs due to dasd controller performance and contention issues, or underlying netiwork issues. You can see it in the kernel message ring buffer. Perhaps you are experiencing similar problems with your new disk subsystem? On Tue, Jul 9, 2013 at 7:39 AM, Rick Barlow rrhbar...@gmail.com wrote: As far as I know, zHPF is disabled. However, I do not know how to confirm that. We have 8 FICON paths to the DASD subsystem shared through switches to 2 z196 machines each having 8 FICON paths to the switches. Of the 8 paths, 4 have been offline from all 8 LPARs for a couple of months while we waited for IODF changes and physical cabling changes to move those 4 paths from old switches to newer switches. Last evening, I varied on the 4 paths that were moved to all 8 LPARs and verified that they were online to the DASD. I only spot checked the paths and not all 1800 volumes. After I confirmed that all 8 paths were online to the DASD, I took the other 4 paths offline. Shortly after that, the small subset of Linux guests began having problems. We only saw issues on about 20 of over 500 Linux guests. I am going to open a PMR and find out how to capture documentation to better understand what is happening. Thank you to all who suggested possible solutions. Rick Barlow -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: More words on The Virtualization Cookbook Redbook residency
Since that is a fairly key differentiator for the Z environment, and something that management can probably understand (hey, look, cross memory networking), you should really try to have a page or two on setting it up. On Wed, Jun 12, 2013 at 9:46 AM, Michael MacIsaac mike...@us.ibm.comwrote: John, you might include a (sub)chapter on setting up a Hipersockets network. Thanks for the input - we will add it to the (wish) list... Mike MacIsaac mikemac at-sign us.ibm.com -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Error while IPLing Cloned Server - RHEL 6.3 on System Z
Right. Linux knows what the underlying virtual address are since they are the real addresses to it. So everywhere in linux's configuration files it expects things to be at 0.0.0300 and 0.0.0301 and it sounds like you have given it the 200's. On Tue, May 21, 2013 at 7:25 AM, Davis, Larry (National VM Capability) larry.dav...@hp.com wrote: Change the Virtual addresses to 300 and 301 and IPL and see if all works Larry Davis, VM Capability -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Paolo Cacciari Sent: Tuesday, May 21, 2013 4:50 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Error while IPLing Cloned Server - RHEL 6.3 on System Z Srinivas, are cuuadd 200 201 included in your /etc/dasd.conf ?? Paolo Cacciari Senior IT Specialist - Certified IBM Italia S.p.A. Sede Legale: Circonvallazione Idroscalo - 20090 Segrate (MI) Cap. Soc. euro 347.256.998,80 C. F. e Reg. Imprese MI 01442240030 - Partita IVA 10914660153 Società con unico azionista Società soggetta all?attività di direzione e coordinamento di International Business Machines Corporation (Salvo che sia diversamente indicato sopra / Unless stated otherwise above) -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: DASD format from Linux only
Its one of those funny FBA devices that live on a 3390. On Tue, Mar 12, 2013 at 3:20 PM, Tom Huegel tehue...@gmail.com wrote: Now I feel stupid .. I was looking at the type FBA-512 and was off thinking FBA(F=format??) I am going to blame it on the new dog, he kept me up all night with his wimpering.. On Tue, Mar 12, 2013 at 11:51 AM, Mark Post mp...@suse.com wrote: On 3/12/2013 at 02:45 PM, Tom Huegel tehue...@gmail.com wrote: Excuse my ignorance, but what is FBAF? On Tue, Mar 12, 2013 at 5:31 AM, Pavelka, Tomas tomas.pave...@ca.com wrote: We have been trying to format all minidisks from Linux only and this turned out to be problematic. I am looking for a solution that would let us stay in Linux without having to involve CMS format for every new minidisk. Let me first describe the problem: When there is a record on dasd that has incorrect cylinder in the count area, this leads to record not found errors when the dasd is brought online. Since the dasd needs to be online before the problem is fixed (by formatting) the only way around that I can see is to preformat in CMS. If new minidisks are regularly formatted and destroyed, it is possible to run into situation where part of the disk has the correct format and part has the cylinder number in the count area wrong. Here is a way to reproduce: 1) Create a minidisk and format it with CDL, e.g. MDISK FBAF 3390 4819 1000 VMBL2H WR It's the MDISK device address. Mark Post -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Adding a Volume to a LV
Its not an LVM. Its probably created by multipath. On Fri, Jan 25, 2013 at 2:41 PM, David Stuart david.stu...@ventura.orgwrote: Morning, I'm fairly new to the linux environment, and I haven't done much with the System for many months, now. (It was set up as a POC, but mgmt could never decide what to POC with it). I need to add a volume to a logical volume group. A df command shows the following: /dev/mapper/oracle--vg-u01 7087616 6606292121288 99% /u01 But no matter what I try, a vgdisplay command says Volume group not found. And if I go to /dev/mapper, I see this: brw-r- 1 root disk 252, 0 Jan 15 15:59 oracle--vg-u01 I have a volume activated and formatted, and I've done the pvcreate, so it's all ready to go. I just need to determine the name of the volume group. Can someone please point out my error, please? Thanks, Dave Dave Stuart Prin. Info. Systems Support Analyst County of Ventura, CA 805-662-6731 david.stu...@ventura.org -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Twin penguins prospered for 417 days, then died
We have some 2.6.16.60 systems up for over 600 days before having to POR the underlying z10. I did an uptime on them just before shutting down out of curiosity. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: zVM-question
AIX can be brought into the mainframe ecosystem by running it on zbx blades, but not directly on z processors. IBM has a good bit of information available about doing that. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: z/Linux and z/OS
There are a lot more hurdles to overcome in a zLinux POC than just technical ones. We as technicians can create a bright, shiny new infrastructure that can stand on its hind legs and dance. But somebody's got to eventually stroke a check for a big number to IBM. For that to happen, you have to have an engaged IBM sales team who can fight the battles of organizational inertia, the business case, budget constraints of mainframes vs. incremental investments in intel platforms, and the CIO who fancies himself a forward thinker (i.e. anti-IBM). That's a lot to ask of the current woefully understaffed IBM sales and marketing organization. On Wed, Aug 1, 2012 at 5:06 AM, Shane G ibm-m...@tpg.com.au wrote: Seems this is a common refrain in this neck of the woods. Lots of blue-sky stories, then little or no engagement. There are (significant) successes, of which there are a few people subscribed here, but there are also a number that are (deliberately) unpublicised. Very unfortunate. zLinux in Aus appears to the watching masses to be the promising child that just never lived up to expectations. Shane ... (Tony, can you change your reply to pls) On Wed, Aug 1st, 2012 at 8:48 AM, Tony Saul wrote: I'm probably just jealous and frustrated when I see success stories as I have been bashing my head against a brick wall for so long. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: z/Linux and z/OS
That's another huge problem, as engineering has traditionally been siloed by hardware technology and the groups usually eye each other with attitudes ranging from wariness to utter disdain. Trying to get co-operation when viewed as a threat is never easy. Let's say that management decides zLinux is good. You're still likely to have both intel and z running in parallel for years. You want to be able to leverage your people, which means that folks have to be willing to take on larger roles and become platform agnostic. Your systems, virutalization, storage, network, middleware, etc people have to become comfortable with each other and work together as a team. You've got to integrate both platforms into your operational support structures. That's a big challenge for management who's got to keep a lot of plates spinning just to achieve the incremental goodness that the platform choice offers. In a mainframe-centric shop that may not be too hard. In a enterprise that already has vast amounts of linux/unix workload, that is going to be difficult. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Run NTP on zLinux or not?
Same way we got incented. Management makes a commitment to hire, train, and compensate zVM people. Do you see that happening in today's world of commodity hardware, open source software, and lowest common denominator application development? -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Moving LVM volume group to another system
Did you do a vgscan? On Wed, Dec 21, 2011 at 9:33 AM, Mark Pace pacemainl...@gmail.com wrote: I've had a disk failure on my linux root filesystem, please don't ask how that happened, and now need to move an LVM file system to another Linux guest. I've added all the disk to the guest, put them all online and doing a pvscan I see that they are all there. What I can't figure out is how to bring them into this system. Every reference I find is for when you were able to do an vgexport ahead of time. I didn't have that luxury and so I can not do a vgimport. -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Moving LVM volume group to another system
Can you see the /dev/mapper structures now? Mount 'em up. * * On Wed, Dec 21, 2011 at 9:50 AM, Mark Pace pacemainl...@gmail.com wrote: Yes. sles003:/srv/ftp # vgscan Reading all physical volumes. This may take a while... Found volume group vg1 using metadata type lvm2 On Wed, Dec 21, 2011 at 9:42 AM, Jonathan Quay jonathan.q...@ihg.com wrote: Did you do a vgscan? On Wed, Dec 21, 2011 at 9:33 AM, Mark Pace pacemainl...@gmail.com wrote: I've had a disk failure on my linux root filesystem, please don't ask how that happened, and now need to move an LVM file system to another Linux guest. I've added all the disk to the guest, put them all online and doing a pvscan I see that they are all there. What I can't figure out is how to bring them into this system. Every reference I find is for when you were able to do an vgexport ahead of time. I didn't have that luxury and so I can not do a vgimport. -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Migrating UNIX application to z/Linux
A coworker of mine made a presentation in front of an IBM Linux Council on his experience migrating an old C language application from Sun Solaris to Linux on Z. The major effort was in 32 to 64 bit issues, endianness, miscastings, migration across two generations of ANSI standards, application polling differences on new hardware, and surrounding infrastructure differences (gcc, make, etc). However long you think its going to take, double it and change to the next larger units of time. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Linux backups and restores to/from tape
We also use NetBackup but it does balloon when it kicks off. Obviously everyone running virtualized linux is looking for a file level backup done from the virtualization layer. Symantec claims they are close in the VMWare arena. It would also be nice to deduplicate there too. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Set Share Relative
You would think that's how it works, but it doesn't. I'm sure our friends and Velocity will chime in. On Tue, Jun 14, 2011 at 11:49 AM, Scott Rohling scott.rohl...@gmail.comwrote: Depends on how granular you want to be, but I tend to go in 100 increments... helps make the math easier. At 200 you get twice as much access to resources as those at 100, at 1500, 15 times, etc. If that seems like too much of a jump (twice as much) -- then go fractional. 150 for 1.5 times the access, etc. Scott Rohling On Tue, Jun 14, 2011 at 8:52 AM, Dean, David (I/S) david_d...@bcbst.com wrote: Is there a rule of thumb on setting relative shares for zVM users? Default has them at 100, we have increased important ones to 200. I noticed the system users have very high shares, e.g. 1500. So, when you are prioritizing, or de-prioritizing should you go in small incremental (25-50) or larger (say 100, 200)? David M. Dean Information Systems BlueCross BlueShield Tennnessee - Please see the following link for the BlueCross BlueShield of Tennessee E-mail disclaimer: http://www.bcbst.com/email_disclaimer.shtm -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/