the listservs thru my Droid.
Anyway, following is a repost of my comment:
Tom Duerbusch
THD Consulting
What I gathered from the original post was not being able to apply maintenance
due to being out of disk space. Well if the failure is caused by memory/swap
filling up, increase virtual memory
talk into the server method.
Tom Duerbusch
THD Consulting
Sent via BlackBerry by ATT
-Original Message-
From: Tom Ambros thomas_amb...@keybank.com
Sender: Linux on 390 Port LINUX-390@VM.MARIST.EDU
Date: Thu, 21 Jun 2012 10:43:16
To: LINUX-390@VM.MARIST.EDU
Reply-To: Linux on 390
of bringing up a test SLES 11 SP 1 system that I can
crash and/or destroy while playing around on adding a pack to an existing LVM.
But just in case it is something simple, it is better to ask the collective,
before I spend the hours on researching the problem.
Thanks
Tom Duerbusch
THD Consulting
the failure to be able to add
drives to an existing LVM.
Thanks
Tom Duerbusch
THD Consulting
Mark Workman mwork...@shelterinsurance.com 3/14/2012 1:48 PM
If you are using YAST:
Partitioner - Volume Management - double click volume group you want to
expand - on the 'Overview' tab select 'Resize
It doesn't look stripped to me.
I might go with Scotts suggestion and use the command line format.
Then I can see if it is a LVM problem, or a yast problem. (now that I have a
test system)
Tom Duerbusch
THD Consulting
linux74:/ # pvscan
PV /dev/dasdc1 VG LVM1 lvm2 [6.88 GB / 0free
.
Thanks for everyones help.
Tom Duerbusch
THD Consulting
Marcy Cortes marcy.d.cor...@wellsfargo.com 3/14/2012 3:54 PM
You shouldn't have unount to resize. We increase all the time with both 10 and
11.
The command is different between the 2 though.
Marcy. Sent from my BlackBerry
and VM isn't paging.
You don't need 4G for Oracle, but if I was on a platform where it was hard to
add memory, I would also start at 4 GB. But for a VM user, start low, and
adjust the VM Guest size and the SGA to suit what you need.
Tom Duerbusch
THD Consulting
Mauro Souza thoriu
? Whether on 390
processors or other platforms?
Tom Duerbusch
THD Consulting
Alan Altmark alan_altm...@us.ibm.com 2/21/2012 2:52 PM
On Tuesday, 02/21/2012 at 03:27 EST, William Carroll
carro...@nationwide.com wrote:
Isn't a BOGOMIP just a calculated loop value (ie how many times through
the loop
In back of my mind, I keep on thinking:
Both UNIX (BSD) and LSD came out of University of California, Berkeley.
Coincidence?
Perhaps the person that came up with BOGOMIPS was having a bad trip?
Tom Duerbusch
THD Consulting
Michael MacIsaac mike...@us.ibm.com 2/22/2012 12:23 PM
What
training etc) or to provide Live Guest Relocation of your near 24X7
Linux images for when you apply maintenance or have any other scheduled
outage of your primary zVM system.
Tom Duerbusch
THD Consulting
Michael Simms simmsmichael1...@yahoo.com 1/4/2012 3:50 PM
I hope everyone had a safe
. So
I knew what files should be there and their filesize.
Only 1 file was not recoverable. I think that was pretty good.
Good work for a Friday..
Tom Duerbusch
THD Consulting
Rafael Godinez Perez rgodi...@redhat.com 12/15/2011 4:05 AM
El 14/12/11 23:00, Tom Duerbusch escribió:
Where I know
them available.
Before I go too far in this
Am I just out of luck?
Or is there a decent chance I can recover these files?
Thanks
Tom Duerbusch
THD Consulting
--
For LINUX-390 subscribe / signoff / archive access
to install the mtst tar file (part of the IBM code) to use
the mtst command.
Without mtst, I don't believe that you can turn on/off compression on your
drives.
Tom Duerbusch
THD Consulting
Edward Jaffe edja...@phoenixsoftware.com 11/5/2011 4:50 PM
Hello,
I have RHEL 6 Linux running as a guest under
dir z: /s
Tom Duerbusch
THD Consulting
Eddie Chen ec...@nyx.com 9/26/2011 3:56 PM
Does any know the command in WINDOW where I can list every files/directories
Under my Z drive.
Similar to the Linux command of
ls -lR where I can list all the files/directory under the file
quit
Yes, it is unsecure. But if you are only bouncing around within the mainframe
(all using the same subnets), you never get out on the wire.
Tom Duerbusch
THD Consulting
saurabh khandelwal sourabhkhandelwal...@gmail.com 9/19/2011 4:32 AM
Hello,
I want to configure RSH/RLOGIN
And if you really wanted to keep a good backup, you used the mylar tape.
I still have my Teletype 33 with paper tape unit (I think it was a KSR model)
along with supplies.
I'm good to go when the rapture occurs!
Tom Duerbusch
THD Consulting
Paul Dembry p...@trifox.com 9/14/2011 12:18 PM
it into the phone system, which was illegal back then, and I
could dial back into the mainframe (OS/VS 1 at that time) and use TSO.
Printing out a listing on the teletype in my apartment was sure noisy.
Tom Duerbusch
THD Consulting
McKown, John john.mck...@healthmarkets.com 9/14/2011 1:16 PM
I
the first question isdoes anyone have Regina working on a SLES 11 SP 1
system?
The iso that I downloaded from Novell is:
SLE-11-SP1-SDK-DVD-s390x-GM-DVD1.iso
Did you use that one, or did you get Regina some other way?
Thanks
Tom Duerbusch
THD Consulting
that was in the path, but that is kind of stretching it.
Anyway, I can work with specifying the path.
Thanks
Tom Duerbusch
THD Consulting
Mark Post mp...@novell.com 8/31/2011 4:18 PM
On 8/31/2011 at 05:05 PM, Tom Duerbusch duerbus...@stlouiscity.com wrote:
I downloaded and mounted the sdk for SLES 11 SP 1
to be able to keep using
Netware to define the users directory, but that is more of a training issue
then a real requirement. We can use SWAT to manage Samba users if necessary.
Thanks for the suggestions.
Tom Duerbusch
THD Consulting
David Boyes dbo...@sinenomine.net 8/28/2011 1:59 AM
Server properties. I think I know what gets
filled in. Can it really be that simple?
Tom Duerbusch
THD Consulting
Patrick Spinler spinler.patr...@mayo.edu 8/29/2011 2:20 PM
It's been a while since I've worked much with Samba, but just a thought:
I had thought that Samba could keep user info
the current Novell
password, it does prompt for the password Samba knows about (not your current
Novell password). So it seems that, within Windows, a mount will pass your
current Windows userid/password (which it kept in sync) to Samba.
Any guidance would be appreciated.
Tom Duerbusch
THD
failure.
Tom Duerbusch
THD Consulting
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX
Well, it didn't say it did anything:
modprobe ipv6
linux76:~ #
Tom Duerbusch
THD Consulting
Scott Rohling scott.rohl...@gmail.com 8/3/2011 12:04 PM
Does a 'modprobe ipv6' have any effect?
Scott Rohling
On Wed, Aug 3, 2011 at 10:47 AM, Tom Duerbusch
duerbus
something in my playing around to cause them...
Well, onward and downward!
Thanks
Tom Duerbusch
THD Consulting
Mark Post mp...@novell.com 8/3/2011 12:18 PM
On 8/3/2011 at 12:47 PM, Tom Duerbusch duerbus...@stlouiscity.com wrote:
No big deal in recreating this system. But it would
in the background, I need to follow the path of how
did it get there (bg). If the process isn't running in background, I have a
different problem all together.
Thanks
Tom Duerbusch
THD Consulting
--
For LINUX-390 subscribe / signoff
is on our backup tapes. Much better than having tar
scan each of the tapes for what files are on them, or at least, much, much,
quicker.
Thanks for the help.
Boy, did I learn a lot of other stuff while researching this problem.
Tom Duerbusch
THD Consulting
Scott Rohling scott.rohl...@gmail.com 8
the connection
active?
Thanks
Tom Duerbusch
THD Consulting
Carsten Otte co...@de.ibm.com 7/28/2011 8:41 AM
Hi Tom,
if I recall correctly, we reserve the tape on open, and free it on closing
the file descriptor. You shout be able
to find out which process is using it via fuser /dev/ntibmX
behavior.
So, REXEC from VSE using the CSI 1.5E stack seems to be telling tar something
that REXEC from VM (z/VM 5.2) isn't.
Time for a beer.
Tom Duerbusch
THD Consulting
Carsten Otte co...@de.ibm.com 7/28/2011 8:41 AM
Hi Tom,
if I recall correctly, we reserve the tape on open, and free
tape drive back immediately.
Thanks
Tom Duerbusch
THD Consulting
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http
from a VSE Batch job using REXEC, the
drive remains IN-USE for a long period of time after the VSE job terminates.
That is really unexpected.
Now for some further research
Tom Duerbusch
THD Consulting
--
For LINUX-390
help
Tom Duerbusch
THD Consulting
(Still on z/VM 5.2)
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin
.
Tom Duerbusch
THD Consulting
Frederick, Michael michael_freder...@ibi.com 7/8/2011 10:23 AM
Hi all,
A question came up about getting an older version of a file on a Linux disk,
which I was able to do by restoring the DASD that held the file in question to
a temporary disk and then they could
If you are on the same mainframe, i.e. it doesn't have to go out on the
network, what was wrong with using REXEC to remote execute CMS
commands?
VM supports it.
I don't know if Linux does (or has a RPM for it).
Tom Duerbusch
THD Consulting
Scott Rohling scott.rohl...@gmail.com 6/21/2011 8:44
it didn't make sense, but that is why a lot of us thing relative
shares the way we do.
Tom Duerbusch
THD Consulting
Rob van der Heij rvdh...@velocity-software.com 6/14/2011 3:56 PM
On Tue, Jun 14, 2011 at 7:57 PM, Scott Rohling scott.rohl...@gmail.com wrote:
As for wrong - I thought that was beaten
in the directory and
Linux is trying to correct your configuration to match reality.
Otherwise, need more info...
Tom Duerbusch
THD Consulting
Craig Collins grizl...@gmail.com 6/8/2011 3:00 PM
Is anyone using an LVM configuration with CKD or EDEV devices? We're trying
to install SLES11 SP1 on EDEVs
on putting on the test
database?
Tom Duerbusch
THD Consulting
Henry E Schaffer h...@unity.ncsu.edu 5/25/2011 1:37 PM
I'm just wondering about quantities of disk space that concern people.
Is 30GB noticeable - or in the noise?
--henry schaffer
.
And you may have to do a chuser to specify a common userid (but I'm not clear
on that one).
I have another samba authorization question, that I will bring up in another
thread.
Tom Duerbusch
THD Consulting
Dean, David (I/S) david_d...@bcbst.com 4/27/2011 9:13 AM
And take the space out
with Samba 3.5
Any simple solutions to this problem?
Thanks
Tom Duerbusch
THD Consulting
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390
works. They are resistant to putting something new in the mix. Eventually,
they will get over it, but right now, it is holding up this project.
Tom Duerbusch
THD Consulting
Dean, David (I/S) david_d...@bcbst.com 4/27/2011 10:55 AM
You won't like this, but,... in swat there is a password icon
have to steal the
processor from one another. I think this hint came out in the SLES8 or SLES9
days. That is the timeframe that I downloaded Websphere and had an official
interest in it...i.e. there was a project coming up. G Given that was a
while back, things may have changed.
Tom Duerbusch
Did you try Developer Works?
Tom Duerbusch
THD Consulting
Dean, David (I/S) david_d...@bcbst.com 4/20/2011 3:07 PM
Project 1. VDISK implemented complete
Project 2. CMM
Will someone recommend a BASIC how-to guide for CMM on zlinux. I have googled
and found many docs
drives.
I don't dare think we would ever get to a Phase 4 (some sort of backup
product/tape manager), but if some one get some grant money
Thanks
Tom Duerbusch
THD Consulting
--
For LINUX-390 subscribe / signoff / archive
the manuals are:
b10735 Oracle Backup and Recovery Basics
b10734 Oracle Backup and Recoverey Advanced users Guide
Tom Duerbusch
THD Consulting
David Stuart david.stu...@ventura.org 4/6/2011 1:12 PM
Morning all,
New linux admin here.
I have an LPAR (yes, an LPAR, no z/VM) running SLES 11 SP1
and compare the results
to the original directory.
Tom Duerbusch
THD Consulting
David Stuart david.stu...@ventura.org 4/6/2011 3:49 PM
Thanks Tom,
So, you defined the NFS Server on the same Linux image as the DB?
And I was wondering how you used your z/VSE System to back it up...
Thanks
BTW, the main manual involved with FTP and tape processing (in case you didn't
know):
TCP/IP for VSE User Guide: Errata
located on their website.
Tom Duerbusch
THD Consulting
David Stuart david.stu...@ventura.org 4/6/2011 3:49 PM
Thanks Tom,
So, you defined the NFS Server on the same Linux
envolved.
Tom Duerbusch
THD Consulting
Ron Foster at Baldor-IS rfos...@baldor.com 3/30/2011 10:56 AM
Hello listers,
Our company has recently been acquired by another company. We are at
the point of having to get our two networks to talk to each other.
Before we can do that, we have to comply
that
can be a bad thing also G.
Tom Duerbusch
THD Consulting
(of course I still have some SLES7 images running)
Simms, Michael michael.si...@hma.com 3/23/2011 11:09 AM
I suspect, I'm unfortunately not a fly on the wall, that Oracle simply wants to
sell their newly acquired hardware 'division', Sun
-cached controllers. The first time thru, the
transaction would abend (AICA...runaway task timer). After storage was loaded,
it would run in a few seconds.
The cheapest/easiest solution was to trigger the transaction a couple times
before users got on.
Is that possible with your application?
Tom
In my case (VSE), the mainframe documentation is in the PD for DB2/VSE.
Tom Duerbusch
THD Consulting
Sent via BlackBerry by ATT
-Original Message-
From: Dazzo, Matt mda...@pch.com
Sender: Linux on 390 Port LINUX-390@VM.MARIST.EDU
Date: Tue, 1 Mar 2011 10:41:34
To: LINUX-390
a sample DB to install? I'm thinking that the sample DB is for DB2/UDB type
testing and if you are not licensed for DB2/UDB, could you still create it and
what could it be used for?
Tom Duerbusch
THD Consulting
Dazzo, Matt mda...@pch.com 2/28/2011 9:59 AM
I'm a zvm/Linux nubie looking for some
to reload a single
table from backup. I have restored the database from backup but didn't need to
roll forward.
Tom Duerbusch
THD Consulting
Davey, Clair cda...@scspa.com 2/15/2011 10:25 AM
I would like to hear some of your 'gotcha's when running Oracle
databases on Linux on Zeries. You
install. This was at a point where the
Oracle install failed, applied the patch, and restart the Oracle install at
that point. Did you have to do the same thing under Suse 11?
Tom Duerbusch
THD Consulting
David Stuart david.stu...@ventura.org 2/4/2011 3:14 PM
Mark,
That will take an 'outage
and timely support.
So, why would anyone use a distribution that is years behind in support?
Inquiring minds want to know...
Tom Duerbusch
THD Consulting
Neale Ferguson ne...@sinenomine.net 1/25/2011 8:27 PM
You are correct. 1G allows the VNC method to be used and all the customization
that comes
failed.
linux72:/VSEVTAPE/archive # mt -V
mt (GNU cpio 2.9)
This result is the same as before I installed the RPM. Shouldn't the version be
something else?
When I go back into Yast, it does show the mp_st package is installed.
I'm doing something wrongimagine that...but what?
Thanks
Tom
Thanks Mark
The documentation showed that the mt_st RPM needed to be installed. But their
examples continued to use the mt command. Oh well. That is solved and
documented.
Thanks
Tom Duerbusch
THD Consulting
Mark Post mp...@novell.com 1/21/2011 12:37 PM
On 1/21/2011 at 01:26 PM, Tom
-10, mod-11
mod-xx drives in the IBM Dasd Subsystems. Any size is really available. But
you may face issues of standards.
Just another opinion
Tom Duerbusch
THD Consulting
Ron Foster at Baldor-IS rfos...@baldor.com 1/13/2011 1:41 PM
Hello list,
This may have been discussed before...
Way
transfer will happen with any upgrade to a
new box. I've been looking at the MES upgrade option for so long, that I have
MES on the mind G.
Tom Duerbusch
THD Consulting
John Cousins john.cous...@bristol.gov.uk 12/6/2010 11:07 AM
Here we go again!
Without success, we've been trying to get
, then I would add more real memory to the mix to
drive down the I/O rate (paging/swaping reduction along with more memory for
caching).
So the question goes back toWhat else are you planning (or playing) for in
the future and how often can you reconfigure the LPAR to add more memory?
Tom
the day, when users are on, we swap very little.
So if this does include swap pages, I don't think the script would give me what
I need, during normal processing. Do you agree? Or am off track here?
Thanks
Tom Duerbusch
THD Consulting
Mrohs, Ray ray.mr...@usdoj.gov 7/23/2010 1:45 PM
Start up
it.
Then test again.
Tom Duerbusch
THD Consulting
Sent via BlackBerry by ATT
-Original Message-
From: Alan Altmark alan_altm...@us.ibm.com
Sender: Linux on 390 Port LINUX-390@VM.MARIST.EDU
Date: Thu, 15 Jul 2010 08:34:38
To: LINUX-390@VM.MARIST.EDU
Reply-To: Linux on 390 Port
, but it shouldn't be needed in the first place
G.
Tom Duerbusch
THD Consulting
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http
Accept
Tom Duerbusch
THD Consulting
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin
1 iso file mounted.
Thanks
Tom Duerbusch
THD Consulting
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu
Thanks
Time to stop banging my head into the wall
Tom Duerbusch
Mike Friesenegger mfrieseneg...@novell.com 5/24/2010 4:18 PM
Hello Tom,
SLES11 SP1 will be publicly available on June 2nd -
http://www.novell.com/news/press/novell-announces-suse-linux-enterprise-11-service-pack-1/
Mike
easier.
Tom Duerbusch
THD Consulting
Mark Post mp...@novell.com 4/26/2010 3:54 PM
On 4/26/2010 at 04:46 PM, Xose Vazquez Perez xose.vazq...@gmail.com
wrote:
On 04/26/2010 10:32 PM, Mark Post wrote:
On 4/26/2010 at 04:19 PM, Michael MacIsaac mike...@us.ibm.com wrote:
Ouch! We use IUCV
MB log file? No
problemuntil you run out of swap space.
Tom Duerbusch
THD Consulting
Also running with Oracle 10g R2 (4 copies)
Rodery, Floyd A Mr CIV US DISA CDB12 floyd.rod...@csd.disa.mil
12/30/2009 4:48 PM
We've noticed some repetitive error messages in regards to a memory
issue
the major interface (Something like Putty), into Linux.
When we need to use the VNC Server...
But bringing up the KDE desktopWell, if you want to play solitaire G
Tom Duerbusch
THD Consulting
John McKown joa...@swbell.net 11/30/2009 5:36 AM
That really helped me! And it also helped with z
fine, that code hasn't been maintained.
A program product for VM console management is much better, at a cost. But I
get by with a home grown ugly piece of code.
Tom Duerbusch
THD Consulting
Michael MacIsaac mike...@us.ibm.com 9/30/2009 9:05 AM
Hello list,
Has anyone ever tried to log the 3270
Thanks Aria
SMBSTATUS is a good thing to know.
I'm not worried about syncing files using RSYNC as the only time this Samba
server is updated is during 1st shiftwell, so far.
I will be doing the expansion during the 3td shift.
Tom Duerbusch
THD Consulting
Aria Bamdad a...@bsc.gwu.edu 9/11
Thanks Mark
I can slip this thru and cycle the Samba server, during a known time period
where no one is actively accessing Samba files.
Thanks
Tom Duerbusch
THD Consulting
Mark Post mp...@novell.com 9/9/2009 6:14 PM
On 9/9/2009 at 4:38 PM, Tom Duerbusch duerbus...@stlouiscity.com wrote
, then
requires additional notification.
On my test system, I moved the Samba /home directory to a LVM setup. No
problem. But I didn't have any currently accessed shares at that time (poor
test plan).
Thanks for any input and direction.
Tom Duerbusch
THD Consulting
I
know no one is going to be active anyway, just their shares are in use.
Right? When I cycle the server, the users have to reaccess their shares? It's
the servers that are accessing the Samba shares, then also have to be
cycledand those users have to be notified...
Thanks
Tom Duerbusch
You have Oracle running.
Look in the recent archives for Module is unknown when signing on.
Tom Duerbusch
THD Consulting
Vincent Getgood vincent.getg...@xchanging.com 6/23/2009 9:03 AM
Hi all,
I'm having problems logging on to my SLES 10 system.
I originally had this system running
shutting it down on test systems or when
testing isn't being done, may be right for you. A lot of OEM code is JAVA.
Tom Duerbusch
THD Consulting
(running with 4 Oracle 10g R2 images)
Kern, Thomas thomas.k...@hq.doe.gov 6/17/2009 12:25 PM
Our DBA has just installed the Oracle Enterprise Manager
moved from VCTCA to VSWITCH.
Tom Duerbusch
THD Consulting
Mike At HammockTree m...@hammocktree.us 6/17/2009 1:17 PM
Since I dndn't get much response form my initial query yesterday, I thought
I'd include a little more information this time. I'll paste in the log
that I captured when trying
the password for this machine (which has CP
authorization to do lots of bad things...)
If you are not on VM, there may be times when the zLinux system crashes, that
you have to have Operations boot the LPAR.
Tom Duerbusch
THD Consulting
Sue Sivets ssiv...@fdrinnovation.com 6/17/2009 2:31 PM
I don't think UDB uses zIIP engines. They use IFL engines. Performance seems
to be good, especially over hipersockets.
Tom Duerbusch
--Original Message--
From: David Boyes
Sender: Linux on 390 Port
To: LINUX-390@VM.MARIST.EDU
ReplyTo: Linux on 390 Port
Subject: Re: DB2 Connect
UDB servers are 512 MB each. Only 2 3390-9 packs for data. Yep,
the first time thru, the application ends up loading DB2 cache, and then the
queries fly. Testing doesn't need a lot of cache. I don't have Websphere, so
I can't consider it's memory loads.
Tom Duerbusch
THD Consulting
want to kill
them off, but I'm also not sure that it would be worth the effort to migrate
them. Not that a z10 is in the near future, but you still have to plan
Thanks
Tom Duerbusch
THD Consulting
--
For LINUX-390 subscribe
is one less step to forget/mess upbut that's what we get paid for. G
Tom Duerbusch
THD Consulting
RPN01 nix.rob...@mayo.edu 4/21/2009 12:58 PM
The problem is that not everyone wants to purchase an external security
manager simply to get this feature. We have no need for an ESM, as, if one
This SIG seems to be the same education available, free, at other
locations also.
See the announcement at the bottom of this email:
Tom Duerbusch
THD Consulting
Barton Robinson bar...@vm1.velocity-software.com 3/30/2009 7:20
PM
Any one that is interested in running Oracle on Z, the conference
, I don't see the difference.
What am I over looking?
Tom Duerbusch
THD Consulting
Barton Robinson bar...@vm1.velocity-software.com 3/31/2009 12:09
PM
I think if you look at the agenda of both, there is quite a
difference.
Tom Duerbusch wrote:
This SIG seems to be the same education
half.).
Tom Duerbusch
THD Consulting
Fred Schmidt fred.schm...@nt.gov.au 3/27/2009 12:17 AM
Would somebody please clarify - is LVM striping still of benefit to
performance if your disk is RAID?
If so, why?
Regards,
Fred Schmidt
NT Government, Australia
$7,000
Tom Duerbusch
THD Consulting
Andrew Wiley debio...@gmail.com 3/22/2009 4:14 PM
I'm trying to research the usefulness of an older IBM mainframe in a
computer science class. The mainframe in question is an IBM 9672 RB6, which,
as I understand it, was first sold in 1998. So it's
sensing all devices when you are in a LPAR world.
Tom Duerbusch
THD Consulting
Ivan Warren i...@vmfacility.fr 2/18/2009 2:03 PM
Mark Post wrote:
Basically, some historical, performance, and data integrity reasons.
Ok,
I'm starting to get a better picture now (as to the how why). As I
in performance when you are on an
Array that is highly used, vs lightly used.
Tom Duerbusch
THD Consulting
עופר ברוך offerbar...@gmail.com 1/29/2009 6:18 AM
Hi all,
We just bought some dasd storage specifically for z/VM and for the
z/Linux
underneath.
This is the time to decide what model
get signed off
and I go back to the logon prompt.
I haven't applied any maintenance other then the SP2. And it doesn't happen on
all images. What could cause that?
Thanks
Tom Duerbusch
THD Consulting
--
For LINUX-390
trying and flood the network and/or mess up communications
with the box that was running initially?
In the old days, when a Windows box came online with a duplicate IP address,
the entire network would suffer.
What happens in the Linux world?
Thanks
Tom Duerbusch
THD Consulting
was in the Oracle 10g documentation.
Tom Duerbusch
THD Consulting
Mauro Souza thoriu...@gmail.com 1/30/2009 2:53 PM
I had this issue after tunning a system to install Oracle. I believe it's
related to PAM modules. If you're able to logon via SSH, you can get rid of
the changes in limits.conf.
In /var
, dasdb1 to the next lowest, etc. Add a
new low drive, say vdisk swap space and you won't be able to IPL. Novice
mistake for sure. But who hasn't hit it?
Many times, it is just what you get use to G.
Tom Duerbusch
THD Consulting
Jones, Russell russell.jo...@anpac.com 1/28/2009 8:58 AM
be
0.0.150, not 0.0.50 G.
I use Yast (partitioning) to change the fstab file.
I manually must change the zipl.conf file.
mkinitrd
zipl
boot and pray
Tom Duerbusch
THD Consulting
Jones, Russell russell.jo...@anpac.com 1/28/2009 12:15 PM
My zipl.conf now looks like this:
*
ANPLNX02
man ex
gives me the man page for vi.
ex being an short way to start up vi and put it in ex mode.
And when I try ex, yep, that's vi G.
Tom Duerbusch
THD Consulting
Jack Woehr j...@well.com 1/28/2009 12:58 PM
Tom Duerbusch wrote:
What is a good line mode editor?
ex is the traditional Unix
However, it is not on the rescue system.
Tom Duerbusch
THD Consulting
Dave Jones d...@vsoft-software.com 1/28/2009 1:39 PM
Tom, for most 'simple' file editing that needs to be done from the 3270 console
(i.e.,
before the network is available), I've found that the 'ed' editor works well.
It's
Ok got around the problem of ed not being on the rescue system.
Use ed from the installed system (duh).
/mnt/bin/ed filename
So far, my testing using the rescue system, ed is the right tool.
Thanks
Tom Duerbusch
THD Consulting
Dave Jones d...@vsoft-software.com 1/28/2009 1:39 PM
Tom
In another session
joe /etc/zipl.conf
modify the parameters = “root=~
may be in multiple places
save
mkinitrd
zipl
Boot to put in effect
Now flashcopy will produce a bootable copy.
Now reclone your system.
Tom Duerbusch
THD Consulting
Jones, Russell russell.jo
of a problem.
Tom Duerbusch
THD Consulting
David Boyes dbo...@sinenomine.net 1/22/2009 3:07 PM
On 1/21/09 5:09 PM, Mark Post mp...@novell.com wrote:
On 1/21/2009 at 2:31 PM, David Boyes dbo...@sinenomine.net wrote:
-snip-
If I haven't said it before, I don't think there's much reason to ever
/zipl.conf
modify the parameters root=~
save
mkinitrd
zipl
Or Rich has a RPM, that when loaded and executed will do the same thing.
Tom Duerbusch
THD Consulting
tony...@bellsouth.net 1/21/2009 11:02 AM
Hi all,
I would like to know what ways you have used to migrate z/Linux CKD DASD
it is much more
complicated.
Thanks
Tom Duerbusch
THD Consulting
David Boyes dbo...@sinenomine.net 1/21/2009 12:42 PM
On 1/21/09 12:02 PM, tony...@bellsouth.net tony...@bellsouth.net wrote:
Hi all,
I would like to know what ways you have used to migrate z/Linux CKD DASD
volumes from one DASD
Thanks Mike
I see that now.
Page 185 shows a move of the old directory, onto the new LVM volume. That
stopped me (reading online instead of printing out the book). Two pages down,
it describes extending a current LVM.
Tom Duerbusch
THD Consulting
Michael MacIsaac mike...@us.ibm.com 1/13
1 - 100 of 657 matches
Mail list logo