Micael Beronius wrote:
Hello Holger,
Thanks for your suggestions. I have now come a little bit closer;
Beginning with 2002-11-12, czap has changed behaviour in that it does
not stop on lock anymore. Is this intended? I tried the czap from
11-11, and with that czap quits as soon as a lock has
On Fri, Nov 22, 2002 at 02:57:58PM -0500, Salvatore Domenick Desiano wrote:
I had thought that DVB-S was capable of time-division multiplexing on a
single signal, whereas DVB-C was not. Which would mean that the DVB-C in
the Motorola box is doing something odd to demultiplex the QPSK-QAM
Hello list,
I have a Hauppauge DVB-s card that's working fine since I got it more than
a year ago from ebay.
There is a certain revision in the linux-driver tho from where it stops
recognizing my card. Also NEWSTRUCT doesn't know it.
I've been using a very very old revision of the driver but that
Hello linux-dvb,
I have a problem. After a successful compilation and installation of loadable
kernel module, the device dvb0 is still not found.
I am using Linux RH 7.x and TechniSat SkyStar1 DVB card.
#cat /proc/pci
...
Bus 0, device 17, function 0:
Multimedia controller: Philips SAA7146
On Tue, Nov 19, 2002 at 07:05:45PM +0100, Martin Neuditschko wrote:
Hello!
I tried to use 'scan' to generate a new channels.conf, but I
always get the error:
ERROR: failed opening '/dev/dvb/adapter0/demux0' (Too many open files)
I am using a Hauppauge DVB-c card with the driver from today
Hi Martin,
Martin Neuditschko wrote:
On Tue, Nov 19, 2002 at 07:05:45PM +0100, Martin Neuditschko wrote:
Hello!
I tried to use 'scan' to generate a new channels.conf, but I
always get the error:
ERROR: failed opening '/dev/dvb/adapter0/demux0' (Too many open files)
I am using a Hauppauge
Hello Holger,
And the tuning; It stops to work with the 1.11 of ves1820.c, (19
HW Please add some debug printk()'s which show the auto inversion bit and
HW increase the delays.
OK, problem is that I don't have any information about the ves1820, it
seams that Philips has some error on their
On Monday 25 November 2002 13:49, Mike wrote:
Hello linux-dvb,
I have a problem. After a successful compilation and installation of
loadable kernel module, the device dvb0 is still not found.
I am using Linux RH 7.x and TechniSat SkyStar1 DVB card.
#ifconfig dvb0
dvb0: error fetching
On Mon, Nov 25, 2002 at 10:06:02PM +0100, Holger Waechtler wrote:
Hi Martin,
Martin Neuditschko wrote:
On Tue, Nov 19, 2002 at 07:05:45PM +0100, Martin Neuditschko wrote:
Hello!
I tried to use 'scan' to generate a new channels.conf, but I
always get the error:
ERROR: failed opening
Gerhard Steiner wrote:
Hello,
I use the driver for vdr-1.1.x from Klaus's site.
When I use dvbscan from the toolset dvbsak I get the
following output
0x07D1: ARDARD [Provider: UPC-TS 02], digital television
service
CA system: unknown_4749
CA ECM/EMM PID: 0x0001
PCR PID:
10 matches
Mail list logo
