Hello,
at startup of the driver there is a little copyrigth message (c) 2001
Convergence integrated media, that scrolls out of the screen.
Sometimes if vdr start fast enough, the channel info is scroll out.
I tried to find where in the driver this message is written to the screen
and how to
Gerhard Steiner writes:
Hello,
at startup of the driver there is a little copyrigth message (c) 2001
Convergence integrated media, that scrolls out of the screen.
Sometimes if vdr start fast enough, the channel info is scroll out.
I tried to find where in the driver this message is
Gerhard Steiner writes:
Hello,
at startup of the driver there is a little copyrigth message (c) 2001
Convergence integrated media, that scrolls out of the screen.
Sometimes if vdr start fast enough, the channel info is scroll out.
I tried to find where in the driver this
I was looking into why the driver doesn't recover after a loss
of signal (like when pulling the antenna cable for a few seconds)
and found that apparently (at least with DVB-S) it starts a
dvb_frontend_recover() sequence, but aquires a lock at a completely
different frequency, which is some 16MHz
Appears that tuxbox uses frontend command fp_ioctl_get_lnb_current
Is that tuxbox home-made special ?
anything similar in normal dvb ?
--
[EMAIL PROTECTED]
60.2N 24.7E
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
Hi!
Scan-config for DVB-T, Gavle - Sweden, maybe this could be included in the
driver?
dvb-t/se-Gavle
--SNIP--
# Gavle (Senda/Boxer Sweden)
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
T 67400 8MHz 2/3 NONE QAM64 8k 1/8 NONE
T 49800 8MHz 2/3 NONE QAM64 8k 1/8
Lars Fredriksson wrote:
Scan-config for DVB-T, Gavle - Sweden, maybe this could be included in the
driver?
Commited to dvb-apps.
Thanks,
Johannes
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
Help!!
Whenever i try to compile the 2.4 version drivers it complains that my
Kernel does not have module loading enabled. It Does though!!
Does anyone know why this is/a way around this.
I found a person with the same problem in in list archive and they had
solved the problem. Unfortunatley i
Klaus Schmidinger wrote:
I was looking into why the driver doesn't recover after a loss
of signal (like when pulling the antenna cable for a few seconds)
and found that apparently (at least with DVB-S) it starts a
dvb_frontend_recover() sequence, but aquires a lock at a completely
different
On Sun, 25 Jan 2004, Johannes Stezenbach wrote:
Lars Fredriksson wrote:
Scan-config for DVB-T, Gavle - Sweden, maybe this could be included in the
driver?
Commited to dvb-apps.
Here's nl-AlphenaandenRijn:
---SNIP---
# Digitenne (Alphen aan den Rijn, The Netherlands)
# T freq bw fec_hi
Robert Cook wrote:
I had my Nebula DigiTV card working before a reinstall. The only
difference is the latest video4linux2 and dvb-kernel modules were used
in the reinstall.
I am running Mandrake 9.2 with a 2.4.23 kernel. Video4Linux downloaded
and installed. dvb-kernel downloaded and
On Sun, 2004-01-25 at 14:37, Lauri Tischler wrote:
Appears that tuxbox uses frontend command fp_ioctl_get_lnb_current
Is that tuxbox home-made special ?
Yes.
anything similar in normal dvb ?
No.
Regards,
Andreas
signature.asc
Description: This is a digitally signed message part
I have compiled and installed the drivers. I then ran ./insmod.sh
as expected there where some errors as it loaded all modules.
I then ran dmesg but the result was
saa7146: register extension 'dvb'.
saa7146: register extension 'dudget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146:
Dear Experts,
My question is more general and concerns differences between the
CI in NOVA/Budget and ff/Premium cards since I have difficulty
understanding
the difference between the two cards.
The CI does not work with NOVA (yet:) but CI works with ff cards because
there is implementation
14 matches
Mail list logo