Jim Shaffer wrote:
On Saturday 21 October 2006 04:22 am, Nico Sabbi wrote:
sample?
What's the best way to capture a sample?
mplayer -dumpstream -dumpfile stream.mpg dvb://TV_station
or
dvbstream ... tuning parameters .. -o pids stream.mpg
then you can upload your sample to
Hartmut Hackmann wrote:
Hi
[EMAIL PROTECTED] wrote:
Hi,
I own this card and I am unable to get it working under linux. I have
posted much info here:
http://forums.gentoo.org/viewtopic-p-3659011.html#3659011(I hope it is
okay not to post everything here again).
There you can look at
lspci
:00:12.0 0480: 1131:7146 (rev 01)
Subsystem: 13c2:100f
:00:12.0 Multimedia controller: Philips Semiconductors
SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH
Technotrend-Budget / Hauppauge WinTV-NOVA-CI DVB card
Flags: bus master, medium devsel, latency 32,
On Tue, 2006-09-05 at 19:23 +0200, Patrick Boettcher wrote:
On Tue, 5 Sep 2006, Chris Wylie wrote:
Okay I have done some usb logs. My observations:
1. It is the same firmware for both devices
2. The firmware is not the same as dvb-usb-vp7045-01.fw
3. The second device (with the TDA10046)
MA == Manu Abraham [EMAIL PROTECTED] writes:
MA F. Lange wrote:
Hi, I've just applied the 'hack' of Raido and for my Twinhan Cab-CI
on standard kernel 2.6.18 it works!
Using Kaffeine I'm able to tune and play FTA and encrypted
channels.
I'm using Alphacrypt 3.05 (in the Netherlands).
Hello
well,
When i do
mplayer -vo x11 dvb://TF1
here what i have in dmesg :
[17182054.128000] tda1004x: setting up plls for 48MHz sampling clock
[17182054.396000] tda1004x: found firmware revision 20 -- ok
[17182054.492000] saa7133[0]/ir: build_key gpio=0x610 mask=0x0 data=0
Am Montag, den 23.10.2006, 10:38 +0200 schrieb [EMAIL PROTECTED]:
Hartmut Hackmann wrote:
Hi
[EMAIL PROTECTED] wrote:
Hi,
I own this card and I am unable to get it working under linux. I have
posted much info here:
http://forums.gentoo.org/viewtopic-p-3659011.html#3659011(I hope it
Am Montag, den 23.10.2006, 19:36 +0200 schrieb [EMAIL PROTECTED]:
Hello
well,
When i do
mplayer -vo x11 dvb://TF1
here what i have in dmesg :
[17182054.128000] tda1004x: setting up plls for 48MHz sampling clock
[17182054.396000] tda1004x: found firmware revision 20 -- ok
Tom,
Isn't the tuner labelled as HVR-1110? (Not HVR1100-revX)
Where i can find this information ?
On my original box, i see : HVR 1100 modèle 1108
see attachment.
Please ignore the numbering on the box
The label on the tuner can should say WinTV-HVR-1110 model# 67019
Steven Toth a écrit :
Tom,
Isn't the tuner labelled as HVR-1110? (Not HVR1100-revX)
Where i can find this information ?
On my original box, i see : HVR 1100 modèle 1108
see attachment.
Please ignore the numbering on the box
The label on the tuner can should say
---BeginMessage---
Steven Toth a écrit :
Tom,
Isn't the tuner labelled as HVR-1110? (Not HVR1100-revX)
Where i can find this information ?
On my original box, i see : HVR 1100 modèle 1108
see attachment.
Please ignore the numbering on the box
The label on the tuner
[EMAIL PROTECTED] wrote:
Steven Toth a écrit :
Tom,
Isn't the tuner labelled as HVR-1110? (Not HVR1100-revX)
Where i can find this information ?
On my original box, i see : HVR 1100 modèle 1108
see attachment.
Please ignore the numbering on
Steven Toth a écrit :
[EMAIL PROTECTED] wrote:
Steven Toth a écrit :
Tom,
Isn't the tuner labelled as HVR-1110? (Not HVR1100-revX)
Where i can find this information ?
On my original box, i see : HVR 1100 modèle 1108
see attachment.
Please
hello all,
i bought a wintv nova-t usb 2.0 (the silver box not the stick) and
installed kernel 2.6.18 but with the drivers from the stock kernel tzap
always reported a signal of 0x0 so i upgraded the dvb stuff with hg.
with these drivers tzap reports a signal of about 0x3000 but the status
(1st
hermann pitton wrote:
Hi,
you might also try with card=87, for that one on analog only TV is
configured yet and you might also try card=94 for testing the other
analog inputs.
It has at least the same gpio on init and might be a clone.
You should install a copy of the recent mercurial
Hi,
Francis Barber wrote:
Hello Hartmut et al,
I have now tested autodetection of this card and DVB (digital tuning).
Both work great!
What I'm not clear on is how to test the card's analogue inputs, such as
S-Video. Amateurish as this may be, I was wondering if anyone could
point me to a
Hi,
hermann pitton wrote:
Am Montag, den 23.10.2006, 10:38 +0200 schrieb [EMAIL PROTECTED]:
Hartmut Hackmann wrote:
Hi
[EMAIL PROTECTED] wrote:
Hi,
I own this card and I am unable to get it working under linux. I have
posted much info here:
Am Montag, den 23.10.2006, 23:18 +0200 schrieb maestro:
hello all,
i bought a wintv nova-t usb 2.0 (the silver box not the stick) and
installed kernel 2.6.18 but with the drivers from the stock kernel tzap
always reported a signal of 0x0 so i upgraded the dvb stuff with hg.
with these
Hi
[EMAIL PROTECTED] wrote:
hermann pitton wrote:
Hi,
you might also try with card=87, for that one on analog only TV is
configured yet and you might also try card=94 for testing the other
analog inputs.
It has at least the same gpio on init and might be a clone.
You should install a copy
Hartmut Hackmann wrote:
The reason for this lies in GPIO magic. With the configuration for card
88, the GPIO configuration for the channel decoder is wrong, so the DSP in
the channel decoder can't boot. But it needs to do this only once after
power up. So we need a specific configuration for
Am Dienstag, den 24.10.2006, 01:18 +0200 schrieb [EMAIL PROTECTED]:
Hartmut Hackmann wrote:
The reason for this lies in GPIO magic. With the configuration for card
88, the GPIO configuration for the channel decoder is wrong, so the DSP in
the channel decoder can't boot. But it needs to do
21 matches
Mail list logo
