Hello!
I can't get my Budget T-1500 to find any channels. The modules seem to load
ok and I do a 'scan scan_example_file_for_my_country_and_town':
scanning scan_example_file_for_my_country_and_town
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 58600 0
Jon Forsberg wrote:
Hello!
I can't get my Budget T-1500 to find any channels. The modules seem to load
ok and I do a 'scan scan_example_file_for_my_country_and_town':
scanning scan_example_file_for_my_country_and_town
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
Hi to everyone
I'm studing dvb signal using a receiver based on dib3000mc and linux kernel
2.6.19 RC2.
Is there anyone who can give me information about what I can read directly from
chip without using frontend driver? and also the measurement of these data?
I'm really in trouble with these
you reported also the orange LED on with card=87.
after some search, simultaneously seemed not to be indicated.
Article 50500 either/or (hybrid)
http://www.typhoon.de/de/art.php?p=805pv=3
and
[...]
Johannes, which article number you have?
A sticker on the back of the card says: Art
Okay that's a pity
I don't have a motor so that's probably not the problem.
Is there anything I can do to help?
Greetings,
Joep
Op zaterdag 21 oktober 2006 15:43, schreef Michel Verbraak:
joep admiraal schreef:
Hello
I have a Twinhan 1034 dvb-s card.
A modprobe mantis goes fine.
When
Hi.
Le sextidi 26 vendémiaire, an CCXV, Patrick Boettcher a écrit :
in my repository (http://linuxtv.org/hg/~pb/v4l-dvb) I just committed a
first working version of the dib7000m/p-driver along with some
modifications in the dib0700-driver.
Thanks for your efforts.
Please load the
Hi,
I bought a DVB-T card : ASUSTeK P7131 Dual
I use a vanilla Linux kernel 2.6.18.1 with the Lilo append option
saa7134.card=78.
The output of lspci is :
02:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135
Video Broadcast Decoder (rev d1)
Subsystem: ASUSTeK
Hi Klaus,
On Tue, 2006-10-24 at 16:05 +0200, Klaus Schmidinger wrote:
Sounds like the same problem I had. The card generates a +5V power
supply for active antennas. If your antenna shorts the power, the
card won't receive anything.
There is a jumper on the card which you can remove to turn
Hello,
On the same PC I've been using under Windows a Technotrend DVB3200-S2 card, I'm
now trying out it with linux under the hood. Good. In theory.
My problem is that I cannot load the firmware, because the /sys/class/firmware
has only the 'timeout' file in it and not the file, named after the
HI,
Frédéric Massot wrote:
Hi,
I bought a DVB-T card : ASUSTeK P7131 Dual
I use a vanilla Linux kernel 2.6.18.1 with the Lilo append option
saa7134.card=78.
The output of lspci is :
02:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135
Video Broadcast Decoder (rev d1)
Hi,
[EMAIL PROTECTED] wrote:
Hartmut Hackmann wrote:
The reason for this lies in GPIO magic. With the configuration for card
88, the GPIO configuration for the channel decoder is wrong, so the DSP in
the channel decoder can't boot. But it needs to do this only once after
power up. So we need
Am Dienstag, den 24.10.2006, 19:55 +0200 schrieb Frédéric Massot:
Hi,
I bought a DVB-T card : ASUSTeK P7131 Dual
I use a vanilla Linux kernel 2.6.18.1 with the Lilo append option
saa7134.card=78.
The output of lspci is :
02:09.0 Multimedia controller: Philips Semiconductors
On Sun, Oct 22, 2006 at 03:14:06PM +1000, Lincoln Dale wrote:
I have 3 usb dvb devices connected to my system. I would like each device to
be assigned a specific adapter number (i.e. /dev/dvb/adapter0 is always my
dvbt device adapter1 is my dvbs device etc) no matter which order they are
Hmm... I suspect you didn't enabled I2C or V4L support.
I've ensured these are now enabled. I noticed this warning on running
'make bzImage':
Warning! Found recursive dependency: I2C VIDEO_MXB VIDEO_SAA7146_VV
VIDEO_SAA7146 I2C
Might this be the root of the problem? Any ideas how to
Thank for the explanation. I misunderstood the meaning of NONE and AUTO.
I tried more to understand the behaviour of scan.
Reading the code of scan it seems that any of the 2 FECs, when they
are NONE, they are converted in AUTO before scanning.
The initial scan file for uk-CrystalPalace is
T
Em Ter, 2006-10-24 às 22:01 +0100, Peter Siepmann escreveu:
Hmm... I suspect you didn't enabled I2C or V4L support.
I've ensured these are now enabled. I noticed this warning on running
'make bzImage':
Warning! Found recursive dependency: I2C VIDEO_MXB VIDEO_SAA7146_VV
VIDEO_SAA7146
On Monday 23 October 2006 03:52 am, Nico Sabbi wrote:
then you can upload your sample to ftp.mplayerhq.hu in the incoming
directory
There is no incoming directory.
I may wait a few days for further testing on my system. I'm now seeing the
same channel produce sound or no sound at random --
Finished testing the remote under Windows. The repeat function does not work under Windows either. So I'm going to remove the repeat key check in the patch. Weird It's the first time I have seen a remote not respond when a key is held.Michael, I'll fix up the white space, repeat key and the
18 matches
Mail list logo
