On Mon, 30 Oct 2006, Michael Krufky wrote:
+ /* Negative SNR, which is possible, but realisticly the
+ demod will lose lock before the signal gets this bad. The
+ API only allows for unsigned values, so just return 0 */
In DVB-T QPSK FEC 1/2 it is possible to
Marco Masotti wrote:
In fact, DVB Core support should add support for SAA7146 based cards
No, DVB Core does not depend on saa7146.
However, I think support for this kind od device is rather problematic,
please report whether you'll be successful.
Thousands of people are successfully using
Martin Zwickel wrote:
Hi Oliver!
On Sat, 28 Oct 2006 03:19:36 +0200
Oliver Endriss [EMAIL PROTECTED] bubbled:
Martin Zwickel wrote:
Hi there!
I have a small problem:
I get no audio from my DVB-S card since a few months.
But I can't remember what could have changed that.
Thomas Dressler wrote:
hi!
at first: sorry my english is bad.
i want compile kernel 2.6.18.1 with the included sa7146 dvb driver as module.
but i can't select it in menuconfig. which moduls must i select also? or
where can i find more infos?. i2c, pci, v4l, dvb-core is selected.
You
On Tue, Oct 24, 2006 at 09:48:07PM +0200, Jon Forsberg wrote:
On Tue, Oct 24, 2006 at 04:05:50PM +0200, Klaus Schmidinger wrote:
Sounds like the same problem I had. The card generates a +5V power
supply for active antennas. If your antenna shorts the power, the
card won't receive anything.
Actually the TT T-1500 driver (err... card ?) has two problems :
- Inverted Inversion : when you specify on to the driver,
the card understand off. A patch for that is pending, you shall find
it in the ML archive. It also has been applied to Oliver's repository.
- Frequency
On Tue, 31 Oct 2006 09:20:34 +0100
Oliver Endriss [EMAIL PROTECTED] bubbled:
Martin Zwickel wrote:
Hi Oliver!
On Sat, 28 Oct 2006 03:19:36 +0200
Oliver Endriss [EMAIL PROTECTED] bubbled:
Martin Zwickel wrote:
Hi there!
I have a small problem:
I get no audio from
Hi,
I have a Gentoo box set up with MythTV, which I currently only use for
dvds/divx. I'm planning to get a HDTV Tuner card. I was looking at the
FusionHDTV Dual Digital (1) but now I can't get it anywhere. How far off do
you think before the Dual2 drivers are fully working? It seems like
I tested my system on latest 2.4 kernel dvb driver - no
lack, 44950 MS/s transponders has no lock...
But on winXP all works.
I think, when driver was made, wasn't big transponders
tested :-(.
On Sat, 28 Oct 2006 03:08:19 +0200
Oliver Endriss [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED]
Hi,
[EMAIL PROTECTED] wrote:
When you use the saa7134-alsa module, you need to set the recording
source in the mixer, either with a mixer application or -after
everything
is loaded - by switching to any other input and back.
I am preparing a patch for this.
I am not sure to understand
Hi,
I found the problem. Actually, I modify the configuration mixer of my
sound card and it working now, but it is not very intuitive. Anyway
thank for the help.
Mathieu
Hi,
Have you tried manually routing sound (using arecord|aplay) from the
TV card to the sound card? I have your very same
On Mon, Oct 30, 2006 at 11:36:24PM +, Andrew Lyon wrote:
On 10/30/06, David Härdeman [EMAIL PROTECTED] wrote:
If you're feeling adventurous, you might try recompiling MythTV. In
mythtv/libs/libmythtv/dvbcam.cpp, function DVBCam::CiHandlerLoop(),
there is a usleep(250) which I suspect is way
Hi,
Have you tried manually routing sound (using arecord|aplay) from the
TV card to the sound card? I have your very same type of card and it
worked for me.
Elias
2006/10/31, Mathieu [EMAIL PROTECTED]:
Hi,
[EMAIL PROTECTED] wrote:
When you use the saa7134-alsa module, you need to set the
Oliver Endriss wrote:
Protect the access to the IER/ISR register of the SAA7146 by the device
spinlock.
Imho it is not necessary to protect write operations to the ISR because
it is a single write-only operation.
You are right.
SAA7146_IER_DISABLE/SAA7146_IER_ENABLE must be
From: Torgeir Veimo [EMAIL PROTECTED]
I'm getting some strange dvb-t signal and am trying to figure out
why. Summarized, the transponders I'm received are the following (one
channel per transponder):
ITV 1, previously on 481833, now on 482000 (ch 22, negative offset)
Where are you getting
Thanks for looking into this! Let me know if there's anything I can do to help with testing (keep in mind I'm not a coder though).Two things... First, linux/config.h doesn't exist anymore so you have to manually remove the #include linux/config.h from the
config-compat.h file. Note, 'make clean'
From: Torgeir Veimo [EMAIL PROTECTED]
The now frequencies I found using w_scan.
Is dvbsnoop part of linux dvb apps?
No, dvbsnoop is a SourceForge project:
http://sourceforge.net/projects/dvbsnoop
Regards,
--
Robert Schlabbach
e-mail: [EMAIL PROTECTED]
Berlin, Germany
I'm getting some strange dvb-t signal and am trying to figure out
why. Summarized, the transponders I'm received are the following (one
channel per transponder):
ITV 1, previously on 481833, now on 482000 (ch 22, negative offset)
BBC 1, previously on 505833, now on 506000 (ch 25, negative
VDR User wrote:
Thanks for looking into this! Let me know if there's anything I can do to
help with testing (keep in mind I'm not a coder though).
Two things...
First, linux/config.h doesn't exist anymore so you have to manually remove
the #include linux/config.h from the config-compat.h
On Tue, October 31, 2006 9:59 pm, Bonne Eggleston wrote:
I have a Gentoo box set up with MythTV, which I currently only use for
dvds/divx. I'm planning to get a HDTV Tuner card. I was looking at the
FusionHDTV Dual Digital (1) but now I can't get it anywhere. How far off
do you think before
e9hack wrote:
Oliver Endriss wrote:
@@ -340,11 +343,13 @@ static int stv0297_read_ber(struct dvb_f
struct stv0297_state *state = fe-demodulator_priv;
u8 BER[3];
- stv0297_writereg(state, 0xA0, 0x80);// Start Counting bit
errors for 4096 Bytes
-
Hartmut Hackmann a écrit :
Hi, all
hermann pitton wrote:
Hi Cabrito,
Am Dienstag, den 17.10.2006, 17:17 +0200 schrieb Cabrito Estrabico:
Hi,
leaving in france, I recently managed to get my pinnacle pctv 310i
card running
hmm, 300i and 310i are very different cards.
in both
e9hack wrote:
Oliver Endriss wrote:
Protect the access to the IER/ISR register of the SAA7146 by the device
spinlock.
Imho it is not necessary to protect write operations to the ISR because
it is a single write-only operation.
You are right.
Hello,
Is anybody receiving BBC HD on the Winter Hill transmitter? According
to Wikipedia, it is on EPG channel 506.
Regards,
Soyeb
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Am Mittwoch, den 01.11.2006, 01:25 +0100 schrieb Cabrito Estrabico:
Hartmut Hackmann a écrit :
Hi, all
hermann pitton wrote:
Hi Cabrito,
Am Dienstag, den 17.10.2006, 17:17 +0200 schrieb Cabrito Estrabico:
Hi,
leaving in france, I recently managed to get my pinnacle pctv
Hi,
i use ubuntu linux.
how i can make my Artec T14 USB-DVB-T stick work in ubuntu?
thanks
Navid
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
26 matches
Mail list logo