Am Sonntag, 14. Januar 2007 11:52 schrieb Harald Milz:
Gregoire Favre [EMAIL PROTECTED] wrote:
Hello,
just found out this :
http://www.micronas.com/pressroom/index.html?doc=980306
(Micronas introduces DVB-S2 PCIe design to tune and decode H.264 at
HD-quality for media PCs (813kB))
Hi,
Currently I use make reload from the mercury repository to
initialise my TT 1401 but it load unwanted module like usb* and take
at lot of time.
What is the module needed for the TT 1401.
Best regards
Béranger
___
linux-dvb mailing list
I'm wondering how an application is supposed to handle
devices with multiple frontends.
Let's assume a device that provides
dvb/adapter0/frontend0DVB-S
dvb/adapter0/frontend1DVB-T
so that it can receive both DVB-S and DVB-T. Does this
mean that it can simultaneously receive
I originally purchased an HVR-950. Using the v4l-dvb-kernel
repository I was able to get this tuner working. So I went out and
purchased two more of these.
When I hooked up 3 tuners it didn't work, when I hooked up the second
tuner dmesg showed output in Listing 1.
I found this line in
Hallo!
I'm concidering buying a freecom DVB-T USB stick. I just coudn't find info if
the radio is working as well under linux. Is it?
Then it says in the comment above the device list: These boxes can only
deliver part of the Transport Stream...UPDATE: the vendor was so kind to
Hello,
I have not been able yet to find a solution or indeed any other similar
problem. This is my first post to this mailing list.
I have four Nebula Electronics tuners: 1 PCI (NXT6000), 2 USB master (MT352)
and 1 USB slave (MT352). They are all the DVB terrestrial versions.
My AMD 32bit
Klaus Schmidinger writes:
I'm wondering how an application is supposed to handle
devices with multiple frontends.
Let's assume a device that provides
dvb/adapter0/frontend0DVB-S
dvb/adapter0/frontend1DVB-T
so that it can receive both DVB-S and DVB-T. Does
BRUNETON Béranger [EMAIL PROTECTED] writes:
I am using budget with frontend tda10086.
So performing :
insmod ./budget.ko
insmod ./tda10086.ko
will be enough ?
regards.
With deps.
___
linux-dvb mailing list
linux-dvb@linuxtv.org
Hi,
With your patch the BER is equal to zero now on my 1401.
Thanks
On 1/11/07, Michael Vistein [EMAIL PROTECTED] wrote:
Hi Hartmut,
Hartmut Hackmann schrieb:
to the current repository. Can you please give this one a try and
report? It patches both, tda10086 and tda8263
I expect that the
Richard Lithvall wrote:
...and I were just about to test your patch when I saw that 2.6.20-rc4
were out and that they fixed a couple of things with usb and i2c so I
gave it a shot (without your patch) and the oops I had before seems to
be gone (and I really stressed the card, zapping like
On Sun, Jan 14, 2007 at 12:19:57PM +0100, Rudy Zijlstra wrote:
Harald Milz wrote:
BTW I'm missing a CI slot in the reference design. In Europe, DVB-S2
broadcasts are likely to be encrypted only. I can't see where to attach a
CAM.
For premiere/Canal+ this is true. ProSieben and SAT1 have
Hi
I wasn't quite sure where should I posts my questions, so let's start
from here.
I have a few questions about my Technotrend DVB-C TT-premium C-2300 PCI
card:
1. What linux driver(s) (modules) my card uses? Are there other card(s)
using the same?
2. What part of the hardware/software extracts
12 matches
Mail list logo