Hi,
Is this device well working under linux especially with vdr?
I found some stuff in the archive that says the devices should work but
there are not much messages written about this.
So I wanted to ask before buying it from dvbshop.
Is this an usb-2.0 box or is usb 1.1 enough for it?
Thanks a
Em Sáb, 2007-03-10 às 02:49 +0100, Johannes Stezenbach escreveu:
On Sun, Mar 04, 2007 at 05:45:54PM +, Simon Arlott wrote:
Fix several instances of dvb-core functions using mutex_lock_interruptible
and returning -ERESTARTSYS where the calling function will either never
retry or never
On 3/10/07, Johannes Stezenbach [EMAIL PROTECTED] wrote:
Maybe a hint that irc is not an adequate medium
for this kind of discussions?
There is nothing wrong with IRC as a medium, but since the interaction
is faster the rate at which you reach the end state is also faster --
positive or
On 3/5/07, Simon Arlott [EMAIL PROTECTED] wrote:
On Mon, March 5, 2007 11:19, Johannes Stezenbach wrote:
On Mon, Mar 05, 2007 at 01:58:14AM +0100, Oliver Endriss wrote:
Simon Arlott wrote:
Is any part of the patch going to be applied? I mentioned this
problem in September last year and it
Em Sáb, 2007-03-10 às 14:10 +0400, Manu Abraham escreveu:
On 3/10/07, Johannes Stezenbach [EMAIL PROTECTED] wrote:
Maybe a hint that irc is not an adequate medium
for this kind of discussions?
There is nothing wrong with IRC as a medium, but since the interaction
is faster the rate
hi,
seems this card is off the too-do list as it *works*...the driver that is.
To get this working for .au apparently we need to extract the the proper
firmware from somewhere. the firmware currently used just happens to work for
the UK/EU and is probably lacking a few features to work properly
Hello Marcel,
I did not try your patch, but the following one against
linuxtv-dvb-apps-1.1.1.tar.bz2.
(available @linuxtv.org).
Unfortunately had to adjust the line numbers plus a blank in lines 3 and 6.
Result: The trouble with the wrong polarization printout is gone. H conforms
to h now.
Will Tatam wrote:
I was directed to http://linuxtv.org/hg/~stoth/multiproto via an
off-list message but this tree is 6 months out of date and does not
compile for me under 2.6.19
Why was this branch not rolled back into the main trunk ?
Manu,
How are the multiproto patches going? I'm
On 3/10/07, Steven Toth [EMAIL PROTECTED] wrote:
Will Tatam wrote:
I was directed to http://linuxtv.org/hg/~stoth/multiproto via an
off-list message but this tree is 6 months out of date and does not
compile for me under 2.6.19
Why was this branch not rolled back into the main trunk ?
Hello,
I've received a HVR-1300 MCE edition. However, I'm unable to get it working.
On boot time everything looks ok: it detects the correct board (see below in
the dmesg). However, the moment I try to run e.g . the radio, I get these
messages:
tda9887 2-0043: i2c i/o error: rc == -121 (should
For those who don't know about it yet, usbreplay is a small tool that
can replay parsed usbsnoop logfiles in linux.
I updated the code to support bulk requests as well now (before it
only supported usb control commands)
http://mcentral.de/wiki/index.php/Usbreplay
Markus
Henrik Beckman [EMAIL PROTECTED] writes:
Are there any differences in the windows stream ?
Well, I've only managed to look at the beginning so far, but there
seem to be at least some minor differences.
The trace starts (after some descriptor reads) with firmware
loading. The firmware seems to
Torbjörn Lundquist wrote:
Hmm. So this should do it:
dvbstream -f 522000 -o -tm 8 0 1248 1249 5180 recordings/test.ts
But VLC does not play that file (mplayer does). I tried to add almost
all pids in the stream but with no luck with VLC.
Here are the pids I got from dvbsnoop:
This is
Le 10.03.2007 06:42:16, Mauro Carvalho Chehab a écrit :
Em Sáb, 2007-03-10 às 14:10 +0400, Manu Abraham escreveu:
On 3/10/07, Johannes Stezenbach [EMAIL PROTECTED] wrote:
Maybe a hint that irc is not an adequate medium
for this kind of discussions?
There is nothing wrong with IRC as
Hi,
I'm working on a fork of your patch for lr319sta (lifeview trio) that
someone should already seen on this list
(http://tux.dpeddi.com/lr319sta/downloads/flydvb_trio_remote_final.diff)
After some irc session with Nickolay, I understand that our will never be
merged in any repository until we
Sorry... Unfinished mail...
I'm working on a fork of your patch for lr319sta (lifeview trio) that
someone should already seen on this list
(http://tux.dpeddi.com/lr319sta/downloads/flydvb_trio_remote_final.diff)
After some irc session with Nickolay, I understand that our patch will
never
Manfred Haelters wrote:
Hello,
I've received a HVR-1300 MCE edition. However, I'm unable to get it
working. On boot time everything looks ok: it detects the correct
board (see below in the dmesg). However, the moment I try to run e.g .
the radio, I get these messages:
tda9887 2-0043: i2c
That's good news. However, can you tell me what the order of the modules
should be?
If I'm not mistaking I can set the order in /etc/modules. To find the
current order I would look at the dmesg, is there a better way ?
Thanks!
Manfred
On 3/11/07, Steven Toth [EMAIL PROTECTED] wrote:
Manfred
18 matches
Mail list logo
