On Wed, June 6, 2007 10:25, Simon Baxter wrote:
David Härdeman wrote:
Try something like:
gnutv -channels channel.conf -out stdout NAME_OF_A_CHANNEL
outfile.mpg
Let that run for a while and then see if you can play outfile.mpg
with xine or mplayer.
I get a file, but not a playable one.
Hello.
Is the curent driver support TwinhanDTV Cab-CI (2033 Mantis)
_with_ CI/CAM ?
--
Andrey Gerzhov
Kittle
___
linux-dvb mailing list
linux-dvb@linuxtv.org
I saw one of these in Maplin (UK) with a catalogue writeup that looked
as if it might be a clone of the Freecom DVB-T pen that I have been
using for several months. Cost was GBP 19.99 'was 49.99'!
I find that it isn't, and I don't want to spend time trying to get it to
work, so I shall take
Stephen Rowles wrote:
Hi,
I've been trying this for a while, all the time assuming that my old
kernel was causing the problems... but I've just upgraded to Fedora 7,
giving me a shiney new 2.6.21 kernel and I'm still having problems.
My device is the hauppauge nova-T usb stick:
Bus
On 7 Jun 2007, at 10:54, Soeren Moch wrote:
As I can see the dib0700 USB bridge in this stick deactivates the
I2C controller during data streaming, so all I2C accesses to mt2060
(tuner) and dib7000pc (dvb-t demodulator) fail. Therefore you get
I2C read fails messages from mt2060 and
Andrey,
AFAIK Manu Abraham is still working on the CI part, so the answer would be 'not
yet'.
Sincerely,
Bob Deblier
- Oorspronkelijk bericht -
Van: Andrey Gerzhov [mailto:[EMAIL PROTECTED]
Verzonden: donderdag, juni 7, 2007 10:40 AM
Aan: linux-dvb@linuxtv.org
Onderwerp: [linux-dvb]
Torgeir Veimo wrote:
As I can see the dib0700 USB bridge in this stick deactivates the
I2C controller during data streaming, so all I2C accesses to mt2060
(tuner) and dib7000pc (dvb-t demodulator) fail. Therefore you get
I2C read fails messages from mt2060 and uninitialized (random) data
for
Soeren Moch wrote:
mt2060 I2C read failed
output in dmesg, and it fails to stream the TS.
Looking at the front end status it never seems static, sometimes I get:
Signal, Lock, Carrier, VITERBI, Sync,
which all looks good. but other times I only get:
Signal, Lock, Carrier, Sync
or
On 7 Jun 2007, at 11:11, Soeren Moch wrote:
Torgeir Veimo wrote:
As I can see the dib0700 USB bridge in this stick deactivates the
I2C controller during data streaming, so all I2C accesses to mt2060
(tuner) and dib7000pc (dvb-t demodulator) fail. Therefore you get
I2C read fails messages
Heh, heh, a lot of traffic on this list concerning nova-t sticks today
;-)
As I can see the dib0700 USB bridge in this stick deactivates the
I2C controller during data streaming, so all I2C accesses to mt2060
(tuner) and dib7000pc (dvb-t demodulator) fail. Therefore you get
I2C read fails
David Härdeman wrote:
Try something like:
gnutv -channels channel.conf -out stdout NAME_OF_A_CHANNEL
outfile.mpg
Let that run for a while and then see if you can play outfile.mpg
with xine or mplayer.
I get a file, but not a playable one. Am trying Kaffeine - as I think
So while streaming from one tuner, is i2c control of the other tuner
disabled?
There is only 1 tuner in this stick.
S:oren
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
It is _no_ hardware restriction.
The symptoms described by Soeren is correct, but the conclusion is wrong.
In fact this behaviour seems to be specific to the open source driver, we
don't have this problem in our reference driver.
If I only would have time, I would take a look.
Did you try
On 7 Jun 2007, at 11:53, Soeren Moch wrote:
So while streaming from one tuner, is i2c control of the other tuner
disabled?
There is only 1 tuner in this stick.
Ok, I was wondering if this was the case for the nova-t 500, which
has two.
--
Torgeir Veimo
[EMAIL PROTECTED]
Hi Patrick!
It is _no_ hardware restriction.
The symptoms described by Soeren is correct, but the conclusion is
wrong.
In fact this behaviour seems to be specific to the open source driver,
we
don't have this problem in our reference driver.
I'm happy that you are aware of this
Thank you.
Which cards from v4l-dvb is good/stable for DVB-C + CI/CAM ? Can anyone
share his success story ?
If i want watch/record two channel at same time i need two cards ?
On Thu, Jun 07, 2007 at 10:03:23AM +, Bob Deblier wrote:
Andrey,
AFAIK Manu Abraham is
Hi Geert,
Em Qua, 2007-06-06 às 21:11 +0200, Geert Uytterhoeven escreveu:
Hi,
drivers/media/dvb/b2c2/flexcop-dma.c uses the PCI DMA API, but
DVB_B2C2_FLEXCOP
doesn't depend on PCI, causing the following problem on PCI-less systems:
| linux/drivers/media/dvb/b2c2/flexcop-dma.c:20:
Mauro Carvalho Chehab wrote:
Hi Geert,
Em Qua, 2007-06-06 às 21:11 +0200, Geert Uytterhoeven escreveu:
Hi,
drivers/media/dvb/b2c2/flexcop-dma.c uses the PCI DMA API, but
DVB_B2C2_FLEXCOP
doesn't depend on PCI, causing the following problem on PCI-less systems:
|
Mauro,
It appears that your change has caused the following build warning:
WARNING: b2c2_flexcop_debug
[/home/mk/v4l-dvb-master/v4l/b2c2-flexcop-pci.ko] undefined!
Weird, this error didn't appeared on my tests here.
Ok, I'll work on fixing this.
I have another alternative working
Hello Patrick!
Patrick Boettcher wrote:
It is _no_ hardware restriction.
The symptoms described by Soeren is correct, but the conclusion is
wrong.
In fact this behaviour seems to be specific to the open source driver,
we
don't have this problem in our reference driver.
The I2C gating
Hi,
The biggest problem is, that we have no time to investigate the issue and
it is no problem on the Windows-platform (because of a different call
sequence).
It has nothing to with the I2C-gating used. It is a basic problem of doing
I2C while streaming is enabled. Not 100% what is exactly
En/na John Pilkington ha escrit:
The packaging says:
Tuner: Microtune tuner
USB IC: Afa (9015 chip)
Demodulator: Afa COFDM
The driver for this chip is under development (not by me).
Bye
--
Luca
A: Because it destroys the flow of the conversation
Q: Why is it bad?
A: No, it's bad.
Q:
Hello,
is anyone succussfully using the following device?
USB ID 0b48:1006
TechnoTrend AG Technotrend/Hauppauge DEC3000-s
(with a recent kernel like 2.6.18.1 or 2.6.21.3)
I ask because I have the same errors like described in this thread (from a year
ago)
On Thu, 7 Jun 2007, Mauro Carvalho Chehab wrote:
Mauro,
It appears that your change has caused the following build warning:
WARNING: b2c2_flexcop_debug
[/home/mk/v4l-dvb-master/v4l/b2c2-flexcop-pci.ko] undefined!
Weird, this error didn't appeared on my tests here.
Ok, I'll work on
24 matches
Mail list logo
