On Wednesday 08 Aug 2007, Darren Salt wrote:
> I demand that [EMAIL PROTECTED] may or may not have written...
>
> > Searching the list shows a few instances of these, but not much further
> > discussion so I'm not sure what the status is. In case it turns out to
> > be useful, here's a trace from m
On Wed, 2007-08-08 at 18:05 +0100, Tim Smith wrote:
> > when did you get the v4l-dvb tree?
>
> 2.6.22.1-41.fc7 :-)
So this is the stock FC7 kernel.
If it is, I would strongly suggest that you build a current tree against
your kernel, as development for this board has moved forward quite a bit
Sigmund Augdal wrote:
> On Tuesday 17 July 2007 07:45, Oliver Endriss wrote:
> > Oliver Endriss wrote:
> > > Imho the interrupt processing was broken:
> > > - The first I2C interrupt should be used to wake-up the task.
> > > It does not matter that it takes some time until ERR in IIC_STA
> > >
Michael Krufky wrote:
> Oliver Endriss wrote:
>
> >Manu Abraham wrote:
> >
> >
> >>On 8/6/07, Michael Krufky <[EMAIL PROTECTED]> wrote:
> >>
> >>
> >>>Now I'm beginning to have doubts about Oliver's original patch:
> >>>
> >>>dvb_frontend: Range check of frequency and symbol rate
> >>>http:/
Trent Piepho wrote:
>On Wed, 8 Aug 2007, Michael Krufky wrote:
>
>
>>>The HD-5000 is the only flexcop card that uses dvb-pll with a pll directly
>>>attached to the I2C bus.
>>>
>>>The flexcop driver doesn't check the return value of dvb_pll_attach, so
>>>there is no error message. It will just
On Wed, 8 Aug 2007, Michael Krufky wrote:
> >
> >The HD-5000 is the only flexcop card that uses dvb-pll with a pll directly
> >attached to the I2C bus.
> >
> >The flexcop driver doesn't check the return value of dvb_pll_attach, so
> >there is no error message. It will just not work correctly.
> >
On 8/9/07, Michael Krufky <[EMAIL PROTECTED]> wrote:
> Manu Abraham wrote:
>
> >On 8/9/07, Michael Krufky <[EMAIL PROTECTED]> wrote:
> >
> >
> >>I apologize for my delayed response -- I had to leave town unexpectedly.
> >>
> >>The above is OK with me. As I understand it, we cannot remove
> >>fe->o
Markus Rechberger schrieb:
> On 8/8/07, Sven Mueller <[EMAIL PROTECTED]> wrote:
>> Markus Rechberger schrieb:
>>> On 8/6/07, Sven Mueller <[EMAIL PROTECTED]> wrote:
Oliver Endriss wrote on 05/08/2007 06:14:
> Sven Mueller wrote:
>> Oliver Endriss wrote on 01/08/2007 00:27:
>>> Sven
Manu Abraham wrote:
>On 8/9/07, Michael Krufky <[EMAIL PROTECTED]> wrote:
>
>
>>I apologize for my delayed response -- I had to leave town unexpectedly.
>>
>>The above is OK with me. As I understand it, we cannot remove
>>fe->ops.info.frequency_max|min because it is part of the userspace API.
>
Trent Piepho wrote:
>On Wed, 8 Aug 2007, Michael Krufky wrote:
>
>
>>>On Wed, 8 Aug 2007, Geoffrey Hausheer wrote:
>>>
>>>
>>>
>>>
On 8/8/07, Michael Krufky mkrufky-at-linuxtv.org wrote:
>On 8/7/07, Geoffrey Hausheer wrote:
>Although your patch may a
On Wed, 8 Aug 2007, Michael Krufky wrote:
> >On Wed, 8 Aug 2007, Geoffrey Hausheer wrote:
> >
> >
> >>On 8/8/07, Michael Krufky mkrufky-at-linuxtv.org wrote:
> >>
> >>
> >>>On 8/7/07, Geoffrey Hausheer wrote:
> >>>Although your patch may appear to fix your problem, I suspect that it
> >>>is really
On 8/9/07, Michael Krufky <[EMAIL PROTECTED]> wrote:
> I apologize for my delayed response -- I had to leave town unexpectedly.
>
> The above is OK with me. As I understand it, we cannot remove
> fe->ops.info.frequency_max|min because it is part of the userspace API.
> I wasn't thinking about that
Oliver Endriss wrote:
>Manu Abraham wrote:
>
>
>>On 8/6/07, Michael Krufky <[EMAIL PROTECTED]> wrote:
>>
>>
>>>Now I'm beginning to have doubts about Oliver's original patch:
>>>
>>>dvb_frontend: Range check of frequency and symbol rate
>>>http://linuxtv.org/hg/v4l-dvb/rev/8186a34dd0a6
>>>
>
Trent Piepho wrote:
>On Wed, 8 Aug 2007, Geoffrey Hausheer wrote:
>
>
>>On 8/8/07, Michael Krufky mkrufky-at-linuxtv.org wrote:
>>
>>
>>>On 8/7/07, Geoffrey Hausheer wrote:
>>>Although your patch may appear to fix your problem, I suspect that it
>>>is really curing a symptom of the problem,
Alan Nisota wrote:
> I've been pretty lax with this, and there are now 4 different versions
> of the GENPIX USB adapter. The newest 'Skywalker' models are fully
> self-contained, and need no additional hardware to be used. A very
> reliable DVB-S card even without using any of the alternate
>
On Wed, 8 Aug 2007, Geoffrey Hausheer wrote:
> On 8/8/07, Michael Krufky mkrufky-at-linuxtv.org wrote:
> > On 8/7/07, Geoffrey Hausheer wrote:
> > Although your patch may appear to fix your problem, I suspect that it
> > is really curing a symptom of the problem, and not the cause.
> This is possib
Hi Soeren,
Am Mittwoch, den 08.08.2007, 11:42 +0200 schrieb Soeren Sonnenburg:
> On Tue, 2007-08-07 at 23:40 +0200, hermann pitton wrote:
> > Hi,
>
> Hi Hermann,
>
> > Am Dienstag, den 07.08.2007, 09:03 +0200 schrieb Soeren Sonnenburg:
> > > On Mon, 2007-08-06 at 00:21 +0200, hermann pitton wrot
I demand that [EMAIL PROTECTED] may or may not have written...
> Searching the list shows a few instances of these, but not much further
> discussion so I'm not sure what the status is. In case it turns out to be
> useful, here's a trace from my mythbackend box. This has an x86_64 kernel.
> I *thi
On Wednesday 08 Aug 2007, Nicolas Will wrote:
> On Wed, 2007-08-08 at 17:18 +0100, [EMAIL PROTECTED] wrote:
> > Searching the list shows a few instances of these, but not much
> > further
> > discussion so I'm not sure what the status is. In case it turns out to
> > be
> > useful, here's a trace fr
On Wed, 2007-08-08 at 17:18 +0100, [EMAIL PROTECTED] wrote:
>
> Searching the list shows a few instances of these, but not much
> further
> discussion so I'm not sure what the status is. In case it turns out to
> be
> useful, here's a trace from my mythbackend box. This has an x86_64
> kernel.
> I
Searching the list shows a few instances of these, but not much further
discussion so I'm not sure what the status is. In case it turns out to be
useful, here's a trace from my mythbackend box. This has an x86_64 kernel.
I *think* everythnig relevant should be in the backtrace already.
Aug 6 20:4
Julian Scheel wrote:
> Attached is a patch which fixes an issue which I see with budget-av based
> cards using libdvben50221 based programs.
> After some time (sometimes just a few minutes, sometimes hours) the stack
> breaks with error -2 or -3 and won't recover until the modules are reloaded.
Julian Scheel wrote:
> Attached is a patch with adds full support for suspend/resume in budget-av.
> Actually only the CI interface needs to be reinitialised as all the tuner
> stuff gets reinitialised at the next tuning-process anyway.
> So this patch should be ready to go pretty straightforward
On 8/8/07, Michael Krufky mkrufky-at-linuxtv.org wrote:
> On 8/7/07, Geoffrey Hausheer wrote:
> > I have been unable to tune my HD5000 using recent kernels for quite
> > some time, and I finally broke down and tried to figure out what is
> > going on.
>
> Geoffrey,
>
> Could you give us some more i
Hej Ryan,
first let me tell you thank you for your reply!
As far as I can bring those things together until now, the blog post
does not fit my problem. Stewart wrote about 7045, mine is 7041
Sorry, I'm not a driver-programmer
Boris
Ryan Stuart wrote:
> Hi Boris,
>
> Have a look at
On 8/7/07, Geoffrey Hausheer <[EMAIL PROTECTED]> wrote:
> I have been unable to tune my HD5000 using recent kernels for quite
> some time, and I finally broke down and tried to figure out what is
> going on.
> It turns out that ever since the lgh06xf driver was removed, my card
> has been unable to
Am Montag, 6. August 2007 17:35 schrieb Uwe Bugla:
> Hello Christoph,
> the provider layout for Hotbird-13.0E seems to change every 6 weeks.
To make it clear: with the current scan file you miss two transponders -
everything else is still valid.
> The following patch ensures that 109 transponder
Trent Piepho wrote:
> On Tue, 7 Aug 2007, Chris Murton wrote:
>> Trent Piepho wrote:
>>> Can you try this with the latest v4l-dvb?
>>>
>>> Load the mt2060 driver, modprobe symbol:mt2060_attach
>>> Make sure the dvb-usb-dib0700 driver is unloaded!
>>> Load the dvb-usb-dib0700 driver
>>>
>>> Does th
On Tue, 2007-08-07 at 23:40 +0200, hermann pitton wrote:
> Hi,
Hi Hermann,
> Am Dienstag, den 07.08.2007, 09:03 +0200 schrieb Soeren Sonnenburg:
> > On Mon, 2007-08-06 at 00:21 +0200, hermann pitton wrote:
> > > Hi Paolo,
> > >
> > > Am Sonntag, den 05.08.2007, 09:56 +0200 schrieb Paolo Dell'Aqu
Is this patch being considered to be added to the main branch?
Even if it is not strictly DVB .. shouldn't this be added since it adds
somewhat vital functionality?
On 8/1/07, Darron Broad <[EMAIL PROTECTED]> wrote:
>
> In message <[EMAIL PROTECTED]>, Darron Broad wrote:
> >
> >LO
> >
> >I have a
Hi Marko,
On 8/7/07, Marko Ristola <[EMAIL PROTECTED]> wrote:
>
> Hi Manu,
>
> Here is the first version of the patch
> that will implement Suspend/resume S2DISK
> (no remote control support).
>
> S2DISK works for me on cu1216.c on 2.6.22.1-41.fc7 kernel.
>
> For another Mantis device, you have to
Oliver,
On 8/8/07, Julian Scheel <[EMAIL PROTECTED]> wrote:
> Attached is a patch with adds full support for suspend/resume in budget-av.
> Actually only the CI interface needs to be reinitialised as all the tuner
> stuff gets reinitialised at the next tuning-process anyway.
> So this patch should
On 8/8/07, Oliver Endriss <[EMAIL PROTECTED]> wrote:
> Manu Abraham wrote:
> > On 8/6/07, Michael Krufky <[EMAIL PROTECTED]> wrote:
> > >
> > > Now I'm beginning to have doubts about Oliver's original patch:
> > >
> > > dvb_frontend: Range check of frequency and symbol rate
> > > http://linuxtv.org
On Tue, 7 Aug 2007, Chris Murton wrote:
> Trent Piepho wrote:
> > Can you try this with the latest v4l-dvb?
> >
> > Load the mt2060 driver, modprobe symbol:mt2060_attach
> > Make sure the dvb-usb-dib0700 driver is unloaded!
> > Load the dvb-usb-dib0700 driver
> >
> > Does that still give the "Unab
In message <[EMAIL PROTECTED]>, Michael Krufky wrote:
Hi.
>Steven Toth wrote:
>> Nicolas Will wrote:
>>> Guys,
>>>
>>> The HVR4000 looks good on paper, but activity in not heavy, and it has
>>> that design flow that prevents it from being real useful (cannot do T
>>> and S at the same time).
>>>
35 matches
Mail list logo
