Hi,
side note :
the problems in my previous post KNC1 TV-Station S, revision 0x1894, doesn't
tune, were related to the PCI-slots of the motherboard I used
rebuilt the machine around a new motherboard, both KNC1's are now recognized
and able to tune
lesson learnt : check the hardware before
hello all,
got myself a hvr1300 the other day and struggle to make it work.
Initially went with the driver modules included in 2.6.23 kernel and
the cx88 modules were loading properly, no odd messages.
nevertheless, dvbscan doesnt return any station at all. Now, this
maybe due to poor reception at
hi,
my setup is two KNC1 TVSTATION cards, one of which has the CI-module attached
and a paid for CAM in it
I would like to be able to use the other card to store scrambled content on
disk (easy) and descramble it afterwards using the CAM from the first card
what command could accomplish this ?
Dear Linux DVB developers,
I've been trying to get DVB-C working on my system, meanwhile with multiple
DVB-C cards (KNC1 and Technotrend budget cards), with their CI counterparts,
and Alphacrypt CAM, so far unfortunately without success. In my
trial-and-error path I've encountered a possible
Dear Linux DVB developers,
I've been trying to get DVB working on a system. I have been trying to get it
working with a KNC1 TV station, which is RMA now. Currently I'm trying to get
it working with a Technotrend C-1500 PCI + CI. The CAM is an alphacrypt with
firmware version 3.11. All
Chris; I am having the same issue I can tune to the tp fine through
an alternate receiver however when i plug the dish into my Nova-s
plus it will not tune. Could this be a but recently introduced into
dvb drivers for this card?
___
linux-dvb
Ben Bucksch wrote:
Luc Brosens schrieb:
why does inserting and accessing a CAM reduce the signal and SNR levels ?
(even if no descrambling is needed, as for BBC World)
My *guess*:
I guess it's due to power - the cards need a lot of power to go over the
wire to the dish. The CAM may
Hi Thierry,
unfortunately it is not possible to re-download a firmware after having a
firmware downloaded with dib0700 (currently).
The only way is to replug the device (which is hard on the Nova T 500).
Patrick.
On Wed, 14 Nov 2007, Thierry Lelegard wrote:
Hello,
This has already been
i again
Anyhow, it was sent you personally and via ml, could you check if there
is differences in patch you got directly and patch you got from ml?
This patch works fine, thanks.
And it did fix the tuning errors, but the stick doesn't really work yet:
% scandvb -a 1 /home/dag/fi-Espoo
Hello,
I tried google and tried to install xawtv too. Nothing seems to work.
Here is the dmesg output for my TV tuner card. It is quite a old card
though, but it works fine. Whenever I start tvtime the screen appears
blue and says 'no signal'.
any help???
saa7130/34: v4l2 driver version
On Nov 18, 2007 4:31 AM, oobe trouble [EMAIL PROTECTED] wrote:
update i got it working using dev/input as lirc driver however im
unable to find a working lircd.conf im my attempts at generating one
using irrecord have been futile so far
by the way i have this remote working fine using a mce 2
On 11/15/07, Robert Backhaus [EMAIL PROTECTED] wrote:
Just to let those on this list know, Chris Pascoe posted patches to
enable the remote on his page
[http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/] on Monday. He may
want some more time to work on them before posting an announcement, so
Hi Paolo,
Am Samstag, den 17.11.2007, 14:27 +0100 schrieb Paolo Dell'Aquila:
I'm really enjoining my Asus P7131 Hybrid: everything it's working fine,
analog TV, DVB-T, radio.
the remote should work perfectly as well.
The only problem is that, excluding mplayer and kaffeine, I've alwyas to
Hi All, trying to get a AF9015 based USB DVB tuner working (Digital Now
TinyTwin) and not having much luck.
Std MythBuntu install (7.10) appears to deteck the IR receiver on it
ok, but no luck with the tuner iteslf.
I've tried the driver from http://jusst.de/hg/af901x/ and
installed/loaded
More info.
I updated the device table in the driver to include Product Id 0x3226
and included the firmware from
http://www.mail-archive.com/linux-dvb@linuxtv.org/msg21157.html
The load gets considerably further but fails in the probe with error -5
[ 221.694198] usb 3-2: new high speed USB
15 matches
Mail list logo
