On Sat, 2008-03-15 at 19:42 +, Ivor Hewitt wrote:
Patrik Hansson wrote:
I tried changing to 2.6.22-19 on my ubuntu 7.10 with autosuspend=-1
but i still lost one tuner.
Have reverted back to 2.6.22-14-generic now and have disabled the
remote-pulling...and i just lost a tuner,
On Tue, 2008-03-11 at 11:07 +, [EMAIL PROTECTED] wrote:
Not sure if this helps or adds that much to the discussion... (I think
this was concluded before)
But I finally switched back to kernel 2.6.22.19 on March 5th (with
current v4l-dvb code) and haven't had any problems with the Nova-t
On Tue, 2008-03-11 at 17:06 +, Ian Liverton wrote:
Hi,
I recently purchased two Nova T-500 (as far as I can tell it’s not one
of the diversity range) cards one is the 99101 LF rev D8B5 and one is
the 99102 LF rev C1B5. The 99101 LF is detected, the other is not.
The only
On Tue, 2008-03-11 at 17:36 +, Ian Liverton wrote:
What is lsusb saying?
Thanks for the fast reply! lsusb says:
Bus 005 Device 002: ID 2040:9940 Hauppauge
Bus 005 Device 001: ID :
Bus 004 Device 001: ID :
Bus 003 Device 001: ID :
Bus 002 Device 001: ID
On Tue, 2008-03-11 at 22:03 +, Philip Pemberton wrote:
[EMAIL PROTECTED] wrote:
Not sure if this helps or adds that much to the discussion... (I
think this was concluded before)
But I finally switched back to kernel 2.6.22.19 on March 5th (with
current v4l-dvb code) and haven't had any
On Sun, 2008-03-02 at 20:45 +0100, Filippo Argiolas wrote:
Il giorno mer, 20/02/2008 alle 10.29 +0100, Filippo Argiolas ha scritto:
I don't know yet how this could be done and maybe it involves some work
rewriting the ir stuff. So I think in the meanwhile my patch could be
merged (if you
On Sun, 2008-03-02 at 14:09 +, Philip Pemberton wrote:
Patrik Hansson wrote:
When i started using options usbcore autosuspend=-1 i deactivated
debug=15
Will reactivate it again and reset my clock also.
Well, changing channels on Myth seems to provoke it into failing...
and it
On Sun, 2008-03-02 at 21:49 +, Philip Pemberton wrote:
I give up.
Philip,
You are having problems to an extend that nobody experienced or
reported.
Certainly not me.
So either there is something wrong in your process, your software, or
you have some faulty hardware.
Nico
On Sun, 2008-03-02 at 23:07 +, Darren Salt wrote:
I demand that Philip Pemberton may or may not have written...
And now the icing on the cake:
[snip]
[17302.420405] BUG: unable to handle kernel paging request at
virtual address
fa23bda0
[17302.420412] printing eip: f89bd162 *pde
Thanks all for the comments, here or in private.
Option B it will be.
I have to bite the bullet and manage to get a power point where I need
it now...
Nico
___
linux-dvb mailing list
linux-dvb@linuxtv.org
On Fri, 2008-02-29 at 21:31 +, Philip Pemberton wrote:
Answers are 2.6.24-8-generic, Mythbuntu 8.04 alpha 2, Hg
615ce34, and
yes (EIT scanning on) for me, and firmware is dvb-usb-dib0700-1.10.fw
(in
/lib/firmware/2.6.24-8-generic). I'm planning to try
On Thu, 2008-02-28 at 19:11 +, Philip Pemberton wrote:
[EMAIL PROTECTED]:~$ uptime
19:06:28 up 23:42, 3 users, load average: 1.19, 1.22, 1.18
And the log is full of this crap:
Feb 28 06:29:13 dragon syslogd 1.5.0#1ubuntu1: restart.
Feb 28 06:29:13 dragon kernel: [39865.332785]
This this OT, but I don't really know where to ask. And after all, the
odds are that I will find a person with that sort of knowledge here.
I currently have a masthead amp for my DVB-T antenna. It uses a power
supply in the house that inject current through the antenna cable.
I am now installing
hmmm...
guys.
First thing: on a Debian or Ubuntu system, I never needed the full Linux
sources to compile a v4l-dvb tree. The headers were always enough.
Second thing: when you compile a v4l-dvb tree on the side, I do not
think that it is adding anything in the headers.
So, if you subsequently
On Tue, 2008-02-19 at 16:17 +0100, Filippo Argiolas wrote:
Hi, my last messages have been almost ignored.. so I'm opening a new
thread. Please refer to the other thread [wintv nova-t stick, dib0700
and remote controllers] for more info.
Here is a brief summary of the problem as far as I
In those days of highlighting shortcomings and bitter comments, I'd like
to express my satisfaction with MythTV.
I've had a history of bad reception of the local DVB-T signal. It was
bad enough to make the dumped MPEG-2 files quite ugly and corrupted.
Because of this the commercial detection
Oh well...
Sorry about that, it seems that I had a very rough time today with
identifying lists from each other.
This post was obviously not targeted for here...
Nico
___
linux-dvb mailing list
linux-dvb@linuxtv.org
On Fri, 2008-02-22 at 19:56 +0900, Matthew Vermeulen wrote:
Hi all,
My remote seems to be totally working now, I've played around with the
keymaps to set it all up nicely :)
Thanks so much to everyone who helped out..
Happy to hear that.
May end up posting some sort of howto to help
On Wed, 2008-02-20 at 10:36 +0100, Jonas Anden wrote:
The strange thing is that modinfo does not say anything about a
level 15
debug for the dvb_usb_dib0700 module.
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#dvb_usb_dib0700
The debug value is a bit field, with each
On Wed, 2008-02-20 at 08:38 +0100, Patrik Hansson wrote:
On 2/19/08, Jonas Anden [EMAIL PROTECTED] wrote:
There is not a lot being said about the Nova-T 500 the last
week.
Don´t know if that is a good (coders coding) or a bad (nothin
happening)
Or coders busy on other code, or
On Wed, 2008-02-20 at 10:27 +0100, Filippo Argiolas wrote:
So I think in the meanwhile my patch could be
merged (if you think it's good) waiting for this work to be done.
I second that.
I'm all for the greater good and Doing Things The Right Way (tm), but
could this effort be spawned in a
On Wed, 2008-02-20 at 09:22 +0100, Filippo Argiolas wrote:
Are you using this file for lircd.conf
[http://linux.bytesex.org/v4l2/linux-input-layer-lircd.conf]?
Where is this file coming from?
I have something more limited (and that works for all keys) here:
On Wed, 2008-02-20 at 21:36 +0900, Matthew Vermeulen wrote:
I've got that file all set up, my hardware.conf for lirc is pasted
below:
I'm running Ubuntu Gutsy and my /etc/lirc/hardware.conf has wildly
different variable names.
See what I have here:
http://www.youplala.net/~will/htpc/LIRC/
On Wed, 2008-02-20 at 15:15 +0100, Filippo Argiolas wrote:
It seems that your remote does not use the toggle bit. I don't know
why
since afaik it is a feature of the rc5 protocol.
By the way you can try to make some test writing the keymap on your
own.
Just edit dib0700_devices.c about at
On Tue, 2008-02-19 at 16:17 +0100, Filippo Argiolas wrote:
I've also implemented repeated key
feature (with repeat delay to avoid unwanted double hits) for rc-5 and
nec protocols. It also contains some keymap for the remotes I've used
for testing (a philipps compatible rc5 remote and a teac
On Tue, 2008-02-19 at 17:21 +, Nicolas Will wrote:
On Tue, 2008-02-19 at 16:17 +0100, Filippo Argiolas wrote:
I've also implemented repeated key
feature (with repeat delay to avoid unwanted double hits) for rc-5
and
nec protocols. It also contains some keymap for the remotes I've
On Tue, 2008-02-19 at 19:19 +, Nicolas Will wrote:
On Tue, 2008-02-19 at 17:21 +, Nicolas Will wrote:
On Tue, 2008-02-19 at 16:17 +0100, Filippo Argiolas wrote:
I've also implemented repeated key
feature (with repeat delay to avoid unwanted double hits) for rc-5
and
nec
On Wed, 2008-02-20 at 06:10 +0900, Matthew Vermeulen wrote:
Hi all... I'm seeing exactly the same problems everyone else is (log
flooding etc) except that I can't seem to get any keys picked by lirc
or /dev/input/event7 at all...
Would this patch help in this case?
It would help with the
On Tue, 2008-02-19 at 22:41 +0100, Jonas Anden wrote:
In any case, especially to that problem with unknown key code I
think it
is time to change the IR-behavior of the DVB-USB.
My problem is, I don't know how.
My naive idea would be, that the IR-code is reporting each key (as
On Tue, 2008-02-19 at 22:56 +0100, Jonas Anden wrote:
There is not a lot being said about the Nova-T 500 the last week.
Don´t know if that is a good (coders coding) or a bad (nothin
happening)
Or coders busy on other code, or coders who ran out of ideas, or
coders
enjoying life,
On Tue, 2008-02-19 at 23:29 +0100, Patrick Boettcher wrote:
On Tue, 19 Feb 2008, Nicolas Will wrote:
I would suggest creating a netlink device which lircd (or similar)
can
read from.
Be ready to discount my opinion, I'm not too good at those things.
Wouldn't going away from an event
On Wed, 2008-02-20 at 01:12 +0100, hermann pitton wrote:
Now stop that logging madness and get back to work!
...
;o)
This is a rather comical situation, though... The debugging tool is
providing a rather unexpected and unwelcomed fix.
Nico
Hi,
no, it is not. It
On Wed, 2008-02-20 at 16:39 +0900, Matthew Vermeulen wrote:
On Feb 20, 2008 7:09 AM, Nicolas Will [EMAIL PROTECTED] wrote:
On Wed, 2008-02-20 at 06:10 +0900, Matthew Vermeulen wrote:
Hi all... I'm seeing exactly the same problems everyone else
On Thu, 2008-02-14 at 10:39 +0100, Filippo Argiolas wrote:
I'm asking this because calling dib0700_rc_setup after each keypress
poll resets the ir data into the device to 0 0 0 0. What I'd like to
know since I know almost nothing about dvb devices if is this going to
someway damage my
On Mon, 2008-02-11 at 21:07 +0100, Patrik Hansson wrote:
Hello
There is not a lot being said about the Nova-T 500 the last week.
Don´t know if that is a good (coders coding) or a bad (nothin
happening)
Or coders busy on other code, or coders who ran out of ideas, or coders
enjoying life,
On Sun, 2008-02-10 at 15:22 +, Stuart Langridge wrote:
I have a Freecom DVB-T USB adapter, listed in lsusb as:
[EMAIL PROTECTED]:~$ lsusb
Bus 004 Device 003: ID 14aa:0161 AVerMedia (again) or CE
it does not seem to be being recognised by the kernel when I plug it
in.
Hello all,
I've been talking with Michel Ludwig about the ADSTech Mini Dual TV
(PTV-339) USB stick.
It needs the xc2028/3028 module (in the main tree currently?) as well as
the tm6000 module (and firmware).
I see that these two hg branches exist:
http://linuxtv.org/hg/~mchehab/tm6000/
Ashim,
Regarding all your posts: I suggest that you do some reading first.
Here are a few places that may be of interest to you:
Compiling the v4l-dvb tree:
http://linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers
Firmware:
http://linuxtv.org/wiki/index.php/Firmware
DVB-S:
Well...
You can now laugh at me, the supposedly problem-free user...
I managed to get my nova-t-500 to lose a tuner too!
MythTV was recording on tuner 1.
I was channel surfing on tuner 2.
After flipping through a few channels, I got a black screen.
I looked at the logs. MythTV is complaining
On Wed, 2008-02-06 at 19:29 +, Nicolas Will wrote:
Well...
You can now laugh at me, the supposedly problem-free user...
I managed to get my nova-t-500 to lose a tuner too!
MythTV was recording on tuner 1.
I was channel surfing on tuner 2.
After flipping through a few channels
On Mon, 2008-02-04 at 10:56 -0500, CityK wrote:
Nicolas Will wrote:
On Fri, 2008-02-01 at 14:43 +, Nicolas Will wrote:
Hi all,
Before I try to make one, did anyone write a script that goes
through
a
channels.conf file and outputs human readable signal strength, BER
On Sun, 2008-02-03 at 10:39 +0100, Jonas Anden wrote:
My system has a 3.3 Ghz Celeron processor. Shaun, Ben, Nicolas -- what
kind of systems are you running? If my hunch is correct, I'd expect
Shaun and Ben to have faster processors than Nicolas since they are
seeing this issue and Nicolas
On Sun, 2008-02-03 at 11:37 +, Shaun wrote:
Hi People,
Jonas I like your never give up attitude.
I am running on a 3Ghz P4. At the moment I am running with a very
slightly
modified driver. I have my remote plugged in and I sometimes get
hundreds of
messages like the one below:
On Fri, 2008-02-01 at 14:43 +, Nicolas Will wrote:
Hi all,
Before I try to make one, did anyone write a script that goes through
a
channels.conf file and outputs human readable signal strength, BER and
such for all channels?
I received 2 scripts by pers. email.
Thanks guys !
I have
Hi all,
Before I try to make one, did anyone write a script that goes through a
channels.conf file and outputs human readable signal strength, BER and
such for all channels?
I'm getting a masthead amp installed and would like to be able to do a
before/after comparaison.
Thanks for the help.
of your message, and I'm still having
problems. I'm not the only one either:
http://www.linuxtv.org/pipermail/linux-dvb/2008-January/022629.html
Thanks
Ben
Nicolas Will wrote:
On Sun, 2008-01-27 at 14:30 +, Ben Firshman wrote:
I am using the (almost) latest SVN version of mythtv
On Wed, 2008-01-30 at 09:06 +, Stephen Rowles wrote:
Patrick Boettcher wrote:
[...]
All users, can you please test, whether I broke something
committing all
of that.
I have just built and started using the new HG, the unknown code
problem
with the remote support in my stick
On Wed, 2008-01-30 at 10:38 +0100, Jonas Anden wrote:
I have just built and started using the new HG, the unknown code
problem
with the remote support in my stick flooding /var/log/messages was a
pain,
but that was solved by simply wrapping the sensors in LX tape to
prevent
it
On Sun, 2008-01-27 at 14:30 +, Ben Firshman wrote:
I am using the (almost) latest SVN version of mythtv. I am using the
v4l-dvb sources from a couple of days back. I have followed and used
the patches that were on (are they in the repos now?):
On Fri, 2008-01-25 at 11:36 +0100, Patrick Boettcher wrote:
Hi Mauro,
Can you please pull from
http://linuxtv.org/hg/~pb/v4l-dvb/
for a bunch of changes for DiBcom-based hardware.
Mauro,
Could you tell me once this is pulles, I'll clean-up the wiki.
All users, can you please
On Fri, 2008-01-25 at 12:27 +0100, Patrick Boettcher wrote:
Just have a look here:
http://linuxtv.org/hg/~pb/v4l-dvb/
and you'll see the patches which made it into.
So far, I've seen:
* MT2060 IF1 frequency from Olivier Danet
(MT1060_IF1_freq_set.diff in wiki)
*
On Fri, 2008-01-25 at 16:19 -0500, [EMAIL PROTECTED] wrote:
Nicolas Will wrote:
On Fri, 2008-01-25 at 11:36 +0100, Patrick Boettcher wrote:
Hi Mauro,
Can you please pull from
http://linuxtv.org/hg/~pb/v4l-dvb/
for a bunch of changes for DiBcom-based hardware
---BeginMessage---
Nicolas Will wrote:
All, and maybe Patrick in particular,
There is a list of patches here:
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Drivers
Some could probably be considered for inclusion into the main tree.
I didn't even know about these patches
Hi,
There is a Kworld DVB-S 100 PCI for cheap at the local Maplin.
In the hg tree I've seen the following:
v4l/cx24123.c:Support for KWorld DVB-S 100 by Vadim Catana
[EMAIL PROTECTED]
It looks like support is there, more or less confirmed by a search
through the list.
The wiki has no
All, and maybe Patrick in particular,
There is a list of patches here:
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Drivers
Some could probably be considered for inclusion into the main tree.
Some may be hacks that probably have a good reason to be, but with a
weird
On Tue, 2008-01-22 at 12:41 +0100, Eduard Huguet wrote:
Hi,
I've just applied the patch and compiled the drivers. I haven't
tested actual tuning, since I'm not in front of my computer now, but
this is awaken and idle so MythTV is currently simply scanning EIT
data. So well, the
On Mon, 2008-01-21 at 21:09 +0100, Soeren Moch wrote:
Janne Grunau wrote:
On Monday 21 January 2008 18:07:06 Soeren Moch wrote:
Hello!
The attached patch solves all my vdr tuning problems on a dib7000p
nova-t stick as far as I could check within the last weekend.
Perhaps this
On Mon, 2008-01-21 at 22:19 +0100, Soeren Moch wrote:
Tuning on low signal still does not work, though. ITV4, with mythtv
saying 49% goes to lock, but no TV.
What should I be looking for, on fact?
My vdr was hanging with black screen after channel switching in ~5% of
all cases.
On Mon, 2008-01-21 at 20:39 +, Nicolas Will wrote:
I will be updating the wiki page, tell me if it goes into the main
tree,
please.
Done:
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Drivers
Nico
___
linux-dvb mailing list
On Mon, 2008-01-21 at 21:05 +0100, Carsten Aulbert wrote:
Marco Di Fresco wrote:
I am looking to get at least the support for the analog TV, but it
would
be great if I can also watch digital TV. I don't know if it matters
(maybe for the local digital TV standad and for the market
On Mon, 2008-01-21 at 22:12 +, Nicolas Will wrote:
This card, outside of very poor reception
Outside of pretty poor reception ares.
The reception of the card seems fine AFAIK.
Being a non-native speaker leads to bad wording, sorry.
Nico
On Tue, 2008-01-15 at 05:12 -0800, Stephen G wrote:
I have ordered a splitter/amplifier
Those are usually bad.
The only place where an amplifier helps is right on the antenna itself,
where it amplifies the signal, not the signal AND all the noise inserted
along the line between the antenna and
On Thu, 2008-01-10 at 11:24 +, Nicolas Will wrote:
On Tue, 2008-01-08 at 10:29 +0100, Patrick Boettcher wrote:
Hi all,
The new year starts well, maybe: We found something which was in our
drivers from the beginning and nobody saw it. See attached.
I'm not sure whether it fixes
On Tue, 2008-01-08 at 10:29 +0100, Patrick Boettcher wrote:
Hi all,
The new year starts well, maybe: We found something which was in our
drivers from the beginning and nobody saw it. See attached.
I'm not sure whether it fixes something, but it might be possible.
Can
everyone try it
On Tue, 2008-01-08 at 08:17 +, Paul Elliott wrote:
Initially I tried the latest dvb sources on my 2.6.22 Gutsy kernel but
didn't have any luck with it,
This is what I am running, no issues with it.
But I have problems 15 miles away from the transmitter, 60 miles may be
the problem.
I'm
On Tue, 2008-01-08 at 08:37 +1100, Jeffrey Borg wrote:
Not much has been said about the NOVA-T 500 on this list lately,
Mainly
because I believe its now fixed,
I beg to differ.
It is very usable, yes. I am happily using it.
But I still get the occasional usual hang, about once a month. Even
Hi all,
I've had this stick in stock and haven;t used it for a while.
I have just compiled a current hg tree and plugged the device and
notices that it came up twice.
I don't remember that behaviour in my initial usage.
Kaffeine sees 2 devices too.
How normal or not is it?
Nico
Dec 20
Patric B. Wrote:
There is an important bug inside that driver which has a big
impact on the
signal reception. I'll already promissed to fix that as soon as
possible,
but it's not yet done.
I'm trying,
Patrick.
Hmm, I must have
On Thu, 2007-12-13 at 20:23 +0100, Luca wrote:
Nicolas Will wrote:
On Wed, 2007-12-12 at 22:49 +0100, Luca wrote:
I have this DVB-T USB device:
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-TD-Stick
It seem supported by difference sources:
http://cateee.net/lkddb/web
This has been a nagging issue. Not a show stopper, but now that the
system is quite stable, i'm willing to look at it.
The remote for the Hauppauge Nova-T-500 has no repeat whatsoever.
If you press the button and keep it that way, the card give one and only
one command.
I have tried the
On Wed, 2007-09-26 at 11:42 +0200, Patrick Boettcher wrote:
Hi all,
it seems that there still problems related to USB with the latest
firmware.
In order to figure out what is the problem I would like to gather some
information about the affected systems:
Can everyone (people who
Hello all,
Now that my DVB-T setup is mostly clean and stable, it is probably time
to introduce some new stuff ;o)
I really have 3 questions.
In DVB-S in general, can I have one receiving card and 2 LNBs with a
DiSEqC switch (2 dishes on 2 different satellites)?
Is the BBC Freesat in UK in
On Sat, 2007-11-03 at 21:18 +0100, P. van Gaans wrote:
On 11/03/2007 03:37 PM, Nicolas Will wrote:
Hello all,
Now that my DVB-T setup is mostly clean and stable, it is probably time
to introduce some new stuff ;o)
I really have 3 questions.
In DVB-S in general, can I have one
On Wed, 2007-10-17 at 14:45 +1000, Dan Harper wrote:
On 16/10/2007, at 8:21 PM, Henrik Beckman wrote:
My guess is reception
Yep, I can now confirm reception is a problem. I had almost 2 weeks
of non-stop goodness until the wind and rain picked up here recently
(Melbourne, Australia)
On Sat, 2007-09-29 at 19:06 +0200, [EMAIL PROTECTED] wrote:
I'm having a very stupid, and boring, problem as I am trying to
install drivers for a Hauppauge WinTV-NOVA-T-500.
Let me suggest to have that read first:
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500
I'm
On Thu, 2007-09-20 at 10:57 +0200, Thierry Lelegard wrote:
Receiver: Hauppauge WinTV NOVA-T-500
Firmware file: dvb-usb-dib0700-01.fw
Thierry,
You are using old code with an old firmware, and running into a known
problem.
I would suggest that you get the new stuff, including the latest test
On Thu, 2007-09-20 at 13:35 +0100, David Harvey wrote:
I'm still experiencing usb-disconnects with the new (1.10
firmware).
Funny that you should mention that in such timely fashion.
My machine just did the usual thing after 6 days of stability.
Things have improved, though, 6 days is
On Thu, 2007-09-20 at 15:18 +0100, David Harvey wrote:
Mine only lasted a matter of hours... timstamp : [ 6914.396000]
I'm still unsure given my instability issues with my other stick,
whether or not my current issues are reflective of flaky epia usb or
the dvb driver stack
But
On Fri, 2007-09-14 at 08:37 +0200, Eduard Huguet wrote:
Anyway, I must admit that the situation has improved a lot with
this new firmware / drivers, so thank you very much to all of you
involved in the project.
Seconded.
Many beer points won in the event of a meet.
Nico
On Thu, 2007-09-13 at 11:18 +0200, Simon G wrote:
How can I solve this to run the latest FW?
// Joacim
2 Ways ... (I think, can someone else say if this is correct or not?)
1. Change the name of the firmware (.fw) to match the old one.
2. Edit
On Wed, 2007-09-12 at 07:46 +0100, Nicolas Will wrote:
On Tue, 2007-09-11 at 17:42 +0100, Nicolas Will wrote:
On Tue, 2007-09-11 at 07:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 10:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 11:14 +0200, Patrick Boettcher wrote
On Tue, 2007-09-11 at 17:42 +0100, Nicolas Will wrote:
On Tue, 2007-09-11 at 07:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 10:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 11:14 +0200, Patrick Boettcher wrote:
Some time has gone by and there have been some fixes
On Wed, 2007-09-12 at 15:31 +0200, Maillist wrote:
I have problems to load this new firmware.
- I have added the file in /lib/firmware and removed the previous one.
- Shutdown, halt the system
- Boot the system
- Checks the dmesg and it shows that it tries to load the previous
firmware
On Tue, 2007-09-11 at 12:08 +0200, Douglas Pierce-Price wrote:
First, make sure you went through this:
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500
Also, can anyone advise me on the best way to ensure I'm using the
latest v4l-dvb drivers?
Then this is what you need:
On Tue, 2007-09-11 at 07:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 10:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 11:14 +0200, Patrick Boettcher wrote:
Some time has gone by and there have been some fixes.
Can everyone please try the latest firmware from
On Mon, 2007-09-10 at 11:14 +0200, Patrick Boettcher wrote:
Some time has gone by and there have been some fixes.
Can everyone please try the latest firmware from
http://www.wi-bw.tfh-wildau.de/~pboettch/home/linux-dvb-firmware/dvb-usb-dib0700-1.10.fw
?
Don't forget to either change
will certainly be eager to
support these efforts and provide all the feedback you may need.
Nicolas Will
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
On Fri, 2007-09-07 at 12:13 +0200, Eduard Huguet wrote:
Good try! I don't know if this will be even remotely helpful, but at
least you tried.
Well, then add your own layer and send a similar email to the same list
of companies.
Complaining here will only take you so far...
It's really a
On Fri, 2007-08-31 at 09:38 +0200, Maillist wrote:
- The amplifier is Televés 5523,
http://www.kjell.com/?item=30294path=50,200,320
As long as it is on-antenna, it should be fine.
For the rest, it sounds all good too.
Nico
___
On Thu, 2007-08-30 at 08:03 +0200, Maillist wrote:
I have an amplifier installed close to antenna.
This is where you want it.
The amplifier has 4 outputs
I hope this is a good quality splitter you got there.
and
one of them are connected to the server which are placed in the
On Thu, 2007-08-30 at 08:06 +0100, Nicolas Will wrote:
At the server I have a 1-2 splitter
Good quality splitter? Nothing plastic, ugly little metallic boxes are
usually better.
You will want stuff like that
Low Insertion loss splitters, high separation
http://ec1
On Wed, 2007-08-29 at 07:44 +0200, Maillist wrote:
The firmware I am using is dvb-usb-dib0700-03-pre1.fw and yesterday I
tried to
downgrade to dvb-usb-dib0700-01.fw but I was not able to load that,
always tried
to load the previous one (which I deleted to avoid conflicts).
The current code
On Thu, 2007-08-16 at 10:09 +0200, Harald Gustafsson wrote:
I should clarify that the whole shutdown process is done, but then it
hanged with a black screen instead of powering off.
This may be completely unrelated to DVB.
Check this bug:
On Wed, 2007-08-15 at 22:28 +0100, Andy Morton wrote:
Finally got around to configuring the nova-t 500 remote with the latest
drivers + firmware, but button presses are only recognised within around
12 inches of the receiver. I was just wondering if anyone else is having
this problem, or if
On Thu, 2007-08-02 at 00:28 +0200, Jonas Anden wrote:
If the sample below is what your remote control errors in syslog is,
the attached patch gets rid of it.
---
Aug 1 13:44:26 ragnyr kernel: dib0700: Unknown remote controller
key : 1E 2A
Aug 1 13:44:57 ragnyr last message repeated 206
On Fri, 2007-08-10 at 12:24 +0200, Eduard Huguet wrote:
I'll try to test it also. Is there any possibility that this patch
gets included into main HG repository?
I guess we will have to wait until Patrick comes back from his vacation.
I hope he gets proper rest and comes back with a bright
On Wed, 2007-08-08 at 18:05 +0100, Tim Smith wrote:
when did you get the v4l-dvb tree?
2.6.22.1-41.fc7 :-)
So this is the stock FC7 kernel.
If it is, I would strongly suggest that you build a current tree against
your kernel, as development for this board has moved forward quite a bit
in
On Thu, 2007-08-09 at 07:50 +0100, Tim Smith wrote:
Since this is a RedHat kernel, I probably ought to open a bug
there...:-/
That would be useful for them, but I really recommend that you get the
latest tree and compile it (you do not need to recompile a whole kernel,
just the DVB stuff)
On Sun, 2007-08-05 at 00:53 +0100, Andy Thomas wrote:
Unfortunately I'm still seeing the USB disconnects even with the new
firware and drivers on a new Hauppauge NOVA-T-500.
oh... insert despair cry of your choice
Got it too...
Aug 8 05:31:07 favia kernel: [35836.965561] usb
On Thu, 2007-08-09 at 22:34 +0200, Eduard Huguet wrote:
Hi,
I've started to use the new remote support for the Hauppauge Nova
T-500 and it's working nearly fine except for one thing: it seems to
really conflict with my TV remote.
Briefly: certain keys in my TV remote (when pressed
1 - 100 of 160 matches
Mail list logo