There is nothing to do without a good doc for the chip.
For now, I have 8-10 cards with SAA7162 without any acceptable answer from
NXP. Yes, there was (is?) the note on the site, that there is a driver for
Linux. Yes, I've got cards hoping, that there is a chance, that
driver could be
Hi,
I've created a patch to support the MSI [EMAIL PROTECTED] A/D v1.1 card. This
card previously had firmware upload issues when using card=109. With
this patch, it's auto-detected and I haven't experienced any firmware
upload problems (although my testing hasn't been exhaustive, but I have
Hi all,
I've the fear that my DVB-S2 skystar HD is broken.
I already showed bad picture with distortions on RTL-transponder.
Since today I don't get it running anymore.
Any ideas ??
OmniVision ov7670 sensor driver, at your service
Linux video capture interface: v2.00
saa7146: register extension
Hi,
I'd like to edit TS files (recorded with gnutv for instance).
Basically I'd like to cut, paste and join to skip commercials.
Is there a tool for that out there?
Otherwise I was thinking of writing one.
I understand that I must cut on a 188 bytes boundary and that should be the
only
Le vendredi 15 février 2008 20:39, Andrea a écrit :
Hi,
I'd like to edit TS files (recorded with gnutv for instance).
Basically I'd like to cut, paste and join to skip commercials.
Is there a tool for that out there?
Otherwise I was thinking of writing one.
I understand that I must cut on
http://project-x.sourceforge.net/
I second that. This tool not only cuts but it will also fix a lot of
AV sync problems.
John
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi Albert,
On Thu, 14 Feb 2008 21:20:32 +0100
Albert Comerma [EMAIL PROTECTED] wrote:
[ 2251.856000] xc2028 4-0061: Error on line 1063: -5
The above error is really weird. It seems to be related to something that
happened before xc2028, since firmware load didn't start on that point of the
Christophe Thommeret wrote:
Le vendredi 15 février 2008 20:39, Andrea a écrit :
Hi,
I'd like to edit TS files (recorded with gnutv for instance).
Basically I'd like to cut, paste and join to skip commercials.
Is there a tool for that out there?
http://project-x.sourceforge.net/
Hi Albert, Hi Mauro,
I have successfulli patched and compiled the driver. Im using the terratec
cinergy device and it works fine.
[ 2251.856000] xc2028 4-0061: Error on line 1063: -5
This error message looked very familar to me, so i searched my log and guess
what I found:
Feb 15 20:42:18
Hello,
I'm trying to setup a Satelco easy watch dvb-c but it doesn't work :
when doing a scan with the following command :
$ scan fr-noos-numericable
scanning fr-noos-numericable
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 14700 6875000 0 3
tune to:
Aah now I remember that issue, in fact it is no issue. I was seeing that
problem when send the sleep command or any other firmware command without
having a firmware running. In was, so far, no problem.
Patrick.
On Fri, 15 Feb 2008, Holger Dehnhardt wrote:
Hi Albert, Hi Mauro,
I have
Hi, Hartmut,
Am Freitag, den 15.02.2008, 01:32 +0100 schrieb Hartmut Hackmann:
Hi, again
snip
So this one works as well, great! But which one is it?
Please tell me the minor device id. I need to use it to separate the 2
sections.
i will need to control the other one in a very
For the DiB7000 the code I sent is requiring a 5.2 IF firmware.
Although it should be possible to recover an offset of 200kHz I would
recommend to use this firmware.
Patrick.
--
Mail: [EMAIL PROTECTED]
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Fri, 15 Feb 2008, Mauro Carvalho
Hi,
Am Freitag, den 15.02.2008, 23:53 +0100 schrieb Hartmut Hackmann:
Hi, Russell
Russell Kliese schrieb:
Hi,
I've created a patch to support the MSI [EMAIL PROTECTED] A/D v1.1 card.
This
card previously had firmware upload issues when using card=109. With
this patch, it's
So, If it's not a problem, any of you could send me the current xc3028
firmware you are using, because mine does not seem to work... Thanks.
Albert
2008/2/15, Patrick Boettcher [EMAIL PROTECTED]:
Aah now I remember that issue, in fact it is no issue. I was seeing that
problem when send the
On 02/13/2008 09:21 PM, P. van Gaans wrote:
On 02/13/2008 03:01 PM, Doru Marin wrote:
Hi,
Can you explain how you select those 4 positions ? DiSEqC commands or
tone/voltage changes ?
Also can you determine the input type of those positions (Hi/Low, H/V,
etc) ? A scenario to see when and
On 2/14/08, CityK [EMAIL PROTECTED] wrote:
Ali H.M. Hoseini wrote:
Hi,
I searched linuxtv.org http://linuxtv.org/ mailing list archive
about SkyStar2 rev2.8A driver, or any suggestion, but I found nothing.
The 2.6.22 kernel initialize B2C2 chip itself, but it could not
identify the
17 matches
Mail list logo
