Is there a way to define the remote control keys?
At time only the number and arrow keys are working.
Hi,
have you tried irrecord?
irrecord is from lirc, if i right? I don't have lirc installed because,
the kerneldriver for the device provides the romote control to act
as a input
Thanks for the reply Peter,
Unfortunately I think the new mac pros only have PCIe slots - still
tempted though!
Good to know its not a 64bit issue.
I'll try to work through the code - guess I could always buy a second
tuner card...
Steve
___
Hi Matthieu,
I committed a modification to finally fix it.
regards,
Patrick.
--
Mail: [EMAIL PROTECTED]
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Sun, 20 Aug 2006, matthieu castet wrote:
Patrick Boettcher wrote:
Hi Matthieu,
I added something to my repository which should
Another post!
Seems I was wrong about the usb tuner not spitting out the mpeg
stream - using dvbstream I can record both streams simultaneous! sweet!
Now just need to install mythtv (and find something interesting to
watch in HD here in Perth)
Steve
В сообщении от 20 августа 2006 13:25 Philip Gartrell-Mills написал(a):
I use this software
http://www.doom9.org/index.html?/DigiTV/projectx-fullguide.htm
to convert .ts to mpeg
I hope that helps.
It's probablly not to this maillist, but...
ProjectX can't process TS to PS, the log below.
and
Nick Fedchik wrote:
В сообщении от 20 августа 2006 13:25 Philip Gartrell-Mills написал(a):
I use this software
http://www.doom9.org/index.html?/DigiTV/projectx-fullguide.htm
to convert .ts to mpeg
I hope that helps.
It's probablly not to this maillist, but...
ProjectX can't process TS
В сообщении от 21 августа 2006 17:16 Nico Sabbi написал(a):
ProjectX can't process TS to PS, the log below.
and main screen of ProjectX show me a message
cannot find sequence header
Any ideas?
maybe the content is simply encrypted or broken. Post a link to a
sample, please
The files
By the way...
maybe the content is simply encrypted or broken. Post a link to a
sample, please
[EMAIL PROTECTED]:/home/ftp/TS# /usr/src/dvb-apps-997424a1799e/util/gnutv/gnutv
-out
file TV4.ts -timeout 30 -channels channels.conf TV4
Using frontend DST DVB-S, type DVB-S
Problem retrieving
I have problems with kernels newer that 2.6.16 and vdr.
With kernel 2.6.17.9 see atached log1.
With kernel 2.6.18-rc4 with kernels drivers and with last mercurial drivers
see log2.
After that errors I need to reboot.
Thanks.
Jose Alberto
El Lunes, 3 de Julio de 2006 18:44, Jose Alberto Reguero
Nick Fedchik wrote:
В сообщении от 21 августа 2006 17:16 Nico Sabbi написал(a):
ProjectX can't process TS to PS, the log below.
and main screen of ProjectX show me a message
cannot find sequence header
Any ideas?
maybe the content is simply encrypted or broken. Post a link to a
В сообщении от 21 августа 2006 18:23 Nico Sabbi написал(a):
The files grabbed by gnutv, 30 or 60 sec each
ftp://213.186.207.66/TS/
channels.conf - in the same dir
they must be encrypted (there's a 8090 program that reportedly
contains audio and video, but in the dump of the video stream
Le Lundi 21 Août 2006 17:39, Nick Fedchik a écrit :
В сообщении от 21 августа 2006 18:23 Nico Sabbi написал(a):
The files grabbed by gnutv, 30 or 60 sec each
ftp://213.186.207.66/TS/
channels.conf - in the same dir
they must be encrypted (there's a 8090 program that reportedly
Patrick Boettcher wrote:
Hi Matthieu,
I committed a modification to finally fix it.
Thanks,
but with our fix does other modes will still works : you don't set
anymore bit 1 ?
Do you think there is a way to better handle hight bandwidth stream (usb
urb tunning, some register tunning) or it
From anonymous user.
--
Christophe Thommeret
# Nottingham (Kimberley, Nottinghamshire)
# T freq bw fec_hi fec_lo mod transmission-mode
guard-interval hierarchy
T 53800 8MHz 3/4 3/4 QAM16 2k 1/32 NONE
T 61800 8MHz 3/4 3/4 QAM16 2k 1/32 NONE
T 73000 8MHz 2/3 1/2 QAM64 2k 1/32 NONE
Adam Zammit wrote:
Hello,
Can someone please verify that this patch works for them. Included is
and update to the keys for the Y04G0004 controller that came in the box
with my Winfast DTV1000 T (purchased in Australia). The patch was
written against 2.6.17.8 vanilla.
Adam,
Thank you for
Hi,
the scan utility from dvb-apps creates a wrong channel.conf for vdr. Vdr uses
the original network id instead of the
network id. The attached patch does fix this little problem.
Signed-of-by: Hartmut Birr [EMAIL PROTECTED]
- Hartmut
--- a/util/scan/scan.c Sat Aug 12 13:29:37 2006 +0100
On Thursday 10 August 2006 18:05, Janne Grunau wrote:
On Thursday 10 August 2006 09:26, Patrick Boettcher wrote:
Can you provide a lsusb -v before and after the cypress firmware
was downloaded?
I can only give the output before firmware download:
http://www.grunau.be/lsusb_operaS1_cold.txt
I have compiled by hand, from LyngSat, scan data for most FTA satellites visible in North America, and I would like it to be
made available to anyone that wants it. I have not included any subscription channels, or NTSC. Many of these channels are on
the air only rarely (feeds). Some are
I have compiled by hand, from LyngSat, scan data for most FTA satellites
visible in North America, and I would like it to be made available to
anyone that wants it. I have not included any subscription channels, or
NTSC. Many of these channels are on the air only rarely (feeds). Some are
Dave Schile schrieb:
I have compiled by hand, from LyngSat, scan data for most FTA
satellites visible in North America, and I would like it to be made
available to anyone that wants it. I have not included any
subscription channels, or NTSC. Many of these channels are on the air
only rarely
Sorry, but it came across for me as a bin file. That's also how it shows up
in the mailing list archive See it at:
http://linuxtv.org/pipermail/linux-dvb/2006-August/012361.html
Dave Schile schrieb:
I have compiled by hand, from LyngSat, scan data for most FTA satellites
visible in North
Yes, I just looked at that. I attached the file as a tar.gz file, but it
got changed to tar.bin. I don't know why, but it appears that that is a
security thing, and I don't know the proper procedures. The files should go
to to dvb-apps, but I don't know how to get them there. I am not a
I demand that Jose Alberto Reguero may or may not have written...
I have problems with kernels newer that 2.6.16 and vdr.
With kernel 2.6.17.9 see atached log1.
With kernel 2.6.18-rc4 with kernels drivers and with last mercurial drivers
see log2.
After that errors I need to reboot.
[snip]
Hi,
I've been using again the WinTV NOVA T USB2 and the module behaved better today.
Still impossible to unload the modules from memory
snd_usb_audio 68704 0
snd_usb_lib14336 1 snd_usb_audio
snd_rawmidi22048 1 snd_usb_lib
snd_hwdep 8708 1
Hi, I bought one of these Artec T1 devices yesterday, been scratching
my head trying to get it to work. I'm getting the exact same error as
reported by Iain Wallace a couple of weeks ago here:
http://www.linuxtv.org/pipermail/linux-dvb/2006-August/012066.html
Now I think I have worked out what
25 matches
Mail list logo