Patrick Bulteel wrote:
I have a TT3200 and I'm running the most current code from Manu's Multiproto
tree. I also have the szap and scan that have been patched to work with the
Multiproto stb0899 driver. The problem that I'm encountering seems to be that
when I ran scan I did get a dump of
Patrick Bulteel wrote:
Quoting Rudy Zijlstra [EMAIL PROTECTED]:
Patrick Bulteel wrote:
I have a TT3200 and I'm running the most current code from Manu's
Multiproto
tree. I also have the szap and scan that have been patched to work with
the
Multiproto
Manu Abraham wrote:
Janne Grunau wrote:
On Tuesday 18 September 2007 01:41:04 Manu Abraham wrote:
Johannes Stezenbach wrote:
On Tue, Sep 18, 2007 at 02:50:09AM +0400, Manu Abraham wrote:
Johannes Stezenbach wrote:
The recording filters are exactly the
Manu Abraham wrote:
Georg Acher wrote:
On Tue, Sep 18, 2007 at 02:50:09AM +0400, Manu Abraham wrote:
The recording filters are exactly the piece from V4 which has the
mmap DMA buffers zero copy API. But to be honest, I don't think
it's important on a PC which can copy 1GByte/s
P. van Gaans wrote:
Stephen Rowles wrote:
P. van Gaans wrote:
Hi,
Honestly, I don't see the point of streaming the whole TS. If you want
to record/watch more than 2 programs at a time, get more
USB-DVB-T-sticks, as much as you want!
And don't listen to tc.
Well I
Oliver Endriss wrote:
Oliver Endriss wrote:
Helmut Auer wrote:
Helmut Auer schrieb:
With this patch my TTs1401 works much better than without.
The BER's are gon and I can receive all channels fine
AFAICS the latest patch was posted in message
Hello,
On Tue, 15 May 2007, Andreas Oberritter wrote:
Hello Rudy,
Rudy Zijlstra wrote:
So in general i am willing to test patches, provided:
1 - i have the HW available to do so
2 - its a patch against the current kernel, or against a rc release.
the mentioned patch is part of the official
Oliver Endriss wrote:
Oliver Endriss wrote:
Helmut Auer wrote:
Helmut Auer schrieb:
With this patch my TTs1401 works much better than without.
The BER's are gon and I can receive all channels fine
AFAICS the latest patch was posted in message
e9hack wrote:
Oliver Endriss wrote:
Apparently it works in polling mode, but not in interrupt mode. Why?
Can someone else confirm problems with this card type
(Terratec Cinergy 1200 DVB-C, sub-system 0x153b:0x1156)?
Now I consider the following options:
- Add a module parameter to disable
Rudy Zijlstra wrote:
e9hack wrote:
Oliver Endriss wrote:
Apparently it works in polling mode, but not in interrupt mode. Why?
Can someone else confirm problems with this card type
(Terratec Cinergy 1200 DVB-C, sub-system 0x153b:0x1156)?
Now I consider the following options:
- Add a module
Oliver Endriss wrote:
Rudy Zijlstra wrote:
hi all,
On kernel 2.6.19.1 the KNC1 is working correctly. On 2.6.20.1 and
2.6.21-rc2 i get problems though, and the device is not fully loaded.
I've attached the dmesg output. Anybody an idea how to progress? I have
the feeling the i2c
On Wed, 14 Mar 2007, [EMAIL PROTECTED] wrote:
Zitat von timecop [EMAIL PROTECTED]:
DSM-CC is used a lot in ISDB-T / ISDB-S for data broadcasting and
firmware download.
Have a poke around http://www.dibeg.org/aribstd/ARIBSTD.htm
One of B-xx standards should cover DSM-CC related stuff. I know
hi all,
On kernel 2.6.19.1 the KNC1 is working correctly. On 2.6.20.1 and
2.6.21-rc2 i get problems though, and the device is not fully loaded.
I've attached the dmesg output. Anybody an idea how to progress? I have
the feeling the i2c communicaton is not working correctly. How to solve
manu wrote:
Le 23.02.2007 08:07:44, Nick Tannenberg a écrit :
Hi gurus, I've two questions for you.
1. Could you point me to a DVB-S hardware supports external CAM
modules that is 100% working with Linux. Just tell me a Card
and a model.
Pointing me to online shop that sells these
Hi,
I have had some problems with my setup for a while. Spent some time
identifying it today, and as far as i can determine it turns out to be
an irq routing problem.
This is on a dual P3-500 system, with 2 WinTV-NOVA-CI PCI cards. The
second has a CAM module in present. When running kernel
Manu Abraham wrote:
Rudy Zijlstra wrote:
Dear,
I'll be extending my setup with a new DVB-S card. As DVB-S2 is being
used more and more, it seems a pity not to include DVB-S2 capability.
The driver is still not complete yet. In pre-alpha state.
Any idea on when it would reach
Dear,
I'll be extending my setup with a new DVB-S card. As DVB-S2 is being
used more and more, it seems a pity not to include DVB-S2 capability.
Which DVB-S2 card is currently best supported, and from which tree? Can
anyone share experience?
Thanks!
Rudy
Hello,
I have a system with 2 (TT-Budget/WinTV-NOVA-CI PCI) cards, and in one
of them a CAM is present (canaldigitaal).
When i boot 2.6.10 i get CAM detected and initialised, see dmesg snip:
Sep 21 12:39:25 satje saa7146: register extension 'budget_ci dvb'.
Sep 21 12:39:25 satje saa7146:
Hello,
Does anyone know wheter progress is made on for the following TwinHan
DVB-C card?
01:03.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)
Subsystem: Twinhan Technology Co. Ltd: Unknown device 0008
Control: I/O- Mem+
19 matches
Mail list logo