For anyone interested the latest hvr4000 patch is here:
http://dev.kewl.org/tmp/hvr4000/stoth-10.diff
This one fixes the signal reading so linux apps can display a
correct representation of the actual level as well as providing
the latest diseqc fixes.
Thanks for the patch, signal strength
Hi.
I'm testing an Hauppauge WinTV Nova CI DVB-s card on Knoppix with kernel
2.6.19.
When I try to scan the Hotbird satellites, the scan utility doesn't found
all channels.
The scanning process takes about only 10 seconds and then stops without
errors.
The scan
Santosh wrote:
Hi manu,
This is Santosh..Iam very much new to linux DVB
family..I want to know where do i get En50221 stack which i can directly
use it in my application..
Santosh,
Sorry for the late reply, was swamped out with a lot of work in all
directions.
I will
JPT wrote:
Hi,
I read all the stuff about the tt3200 during the last days...
i.e.
http://linuxtv.org/hg/~manu/stb0899-c5
make_myconfig.pl
but...
how does the driver know which kernel to apply to?
I now copied the .config file to the root of the driver directory.
now it prints
Hallo,
Ok. How does the development of stb0899 forward? Is someone working on it.
Unfortantly Im not a developer. But I can perhaps do some testing etc.
Best Regards
Magnus
Ursprungligt meddelande-
From: Manu Abraham [EMAIL PROTECTED]
Date: Sun, 01 Apr 2007 16:09:11 +0200
To: [EMAIL
I installed hopefully all necessary drivers and firmware
for a DIBcom 3000p DVB-T device on OpenSuse 10.2 system with 2.6.18
Kernel
dmesg says registered and looks fine for the hardware :
dvb-usb: found a 'DiBcom USB2.0 DVB-T reference design (MOD3000P)' in
cold state, will try to load a
[EMAIL PROTECTED] wrote:
Hallo,
I have a TT-3200 card and trying to get it work in Linux (for running with
Myth).
With some search around I found that Manu has a stb0899 drivers that should
do the job.
I suceeded to compiled it and are able to load the drivers (and it found the
Nick Fedchik wrote:
Hello!
Where the repo of patched kernel source or URL to download patches for the
subject?
I found one URL in the mail-list archive, but all attemps failed.
I'm urgently need the patch for DVB-C Twinhan 2033!
pushed out a snapshot out to ..
e5tr4ng3d wrote:
Hello..
What's the word on the new VP 1080i card (which presumably supports
HDTV)? Is it fully supported by the driver?
1040/1041 is not supported yet, some more things needs to be done for
the same. But will be there soon.
Manu
Hi John,
Please provide a Signed-off-by for your patch for it to be applied at
the tree.
Cheers,
Mauro.
Em Sáb, 2007-03-31 às 14:36 +, john owen-jones escreveu:
hi
I apologise for doing this incorrectly but i haven't a clue how to upload
the diff file
this works very well with the
Hi,
if the video-device (saa7146 on a FF card) was open for capturing, the close
call doesn't release the capture buffers.
The attached patch may fix this problem. Possible there is more cleanup
necessary.
- Hartmut
signed-off-by: Hartmut Birr [EMAIL PROTECTED]
- Release the capture buffers
Am Samstag, den 31.03.2007, 20:12 -0400 schrieb Michael Krufky:
hermann pitton wrote:
...
Mike,
I still think Manu should give the dvb-maintainer for some months and
after it also the v4l-dvb maintainer at least for half a year.
We should at least have a chance to disagree about
Andrea Venturi wrote:
hi,
i have seen someone @intel proposing an API to access the accelerated
engines inside the newer GPUs.
maybe it can be folded inside the v4l-dvb stuff.
This should be handled by a layer called xvmc, not as a v4l-dvb driver.
Manu
On Sat, 31 Mar 2007, john owen-jones wrote:
I apologise for doing this incorrectly but i haven't a clue how to upload
the diff file
After you make your changes, run 'make commit'. This will give you a
pre-made log message to fill in and also fix certain things (e.g. add new
cards to the
Hi all
i'm having troubles trying to let it works my skystar2 card.
lspci -v
00:0a.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB
chip / Technisat SkyStar2 DVB card (rev 02) Subsystem: Techsan Electronics Co
Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card Flags:
john owen-jones wrote:
hi
I apologise for doing this incorrectly but i haven't a clue how to
upload the diff file
this works very well with the kworld dvb-t 210 essentially its a clone
of a philips reference design and really just entails identifying the card.
I checked out the source
Hello
I'm hoping some one can help me. I'm trying to make lirc handle
the remote control for the 110 but all the data i get from the card is
from the remote that came with the card. The codes i receive from the
remote are 1 byte long and match the buttons mapping in the patch
floating
17 matches
Mail list logo
