I just picked up this card and I'm looking forward to trying it. I run Fedora
7 x86_64 2.6.23-1.10. I guess I'll try the steps as described at
http://linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers and see how
it goes.
How close are we to getting NTSC to work? Do I need
The starbox 1 is quite limited in regards to data streaming: It has only 8
PID-filter-entries (Where in my tests I only could use 6). That makes the
card quite uncomfortable to use for end-user-software like vdr or mythtv.
This is mainly the reason why I skipped adding support for it.
Hi,
Back in May in this mailing list there were few messages describing a problem
with Twinhan Alpha USB2 DVB-T (the old device, not the new one with the same
brand name which doesn't work at all in Linux, yet) device. Couple people
reported (including me) that this device had problems in
In my hg repository the patch is committed. Due to time limitations I
could not prepare it for 2.6.24 ... sorry.
Patrick.
On Sat, 3 Nov 2007, Michael Baudinne wrote:
Namaste,
I have a Nova-TD usb stick on Debian Etch with the latest hg v4l-dvb
tree compiled against the backports kernel
[EMAIL PROTECTED] wrote:
I just picked up this card and I'm looking forward to trying it. I run
Fedora 7 x86_64 2.6.23-1.10. I guess I'll try the steps as described at
http://linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers and see
how it goes.
How close are we to getting
Michael Krufky wrote:
[EMAIL PROTECTED] wrote:
I just picked up this card and I'm looking forward to trying it. I run
Fedora 7 x86_64 2.6.23-1.10. I guess I'll try the steps as described at
http://linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers and see
how it goes.
How
Hi,
Have a GDI Black Gold card with subsystem 14c7:0108 and I cannot make it work.
Does anyone on the list have a working config for this card and/or know how to
make this card work?
I'm getting so far as video1 and vbi1 is created, but I don't have any entries
in /dev/dvb/.
cat /dev/video1
Johannes Stezenbach wrote:
On Fri, Nov 02, 2007, Steven Toth wrote:
The design goals for me are:
1) We stop trying to predict what the API will need in 5 years, and focus
on building a very simplistic ioctl API for getting and setting generic
frontend properties, it should be basic enough
Markus Rechberger wrote:
On 11/5/07, Steven Toth [EMAIL PROTECTED] wrote:
Johannes Stezenbach wrote:
On Fri, Nov 02, 2007, Steven Toth wrote:
The design goals for me are:
1) We stop trying to predict what the API will need in 5 years, and focus
on building a very simplistic ioctl API for
On Mon, Nov 05, 2007, Steven Toth wrote:
Johannes Stezenbach wrote:
struct dvb_tuning_param p[3] = {
{ .id = MODULATION, .val = MOD_8VSB },
{ .id = FREQUENCY, .val = 59125 },
{ .id = 0 }
};
ioctl(fd, DVB_TUNE, p);
You can't
On Mon, Nov 05, 2007, Johannes Stezenbach wrote:
Of course you can have variable length args to ioctl(). It's
just that you can't let dvb_usercopy() do the work anymore but
have to call copy_from_user() yourself, but I would favor a simple,
generic API anytime over one with unnecessary,
On 05/11/2007, Johannes Stezenbach [EMAIL PROTECTED] wrote:
Seems like no one is interested.
BTW, since every DVB-S2 demod is also a DVB-S demod, why does
no one split the DVB-S parts of their driver for merging
first? It would make the users happy as it would change the
state from card
On Monday 05 November 2007, Johannes Stezenbach wrote:
On Mon, Nov 05, 2007, Steven Toth wrote:
Johannes Stezenbach wrote:
struct dvb_tuning_param p[3] = {
{ .id = MODULATION, .val = MOD_8VSB },
{ .id = FREQUENCY, .val = 59125 },
{ .id = 0 }
At this stage I'm looking for a Yes, in principle we like the idea, but
show me how you do feature XYZ from other devs. At which point I'll flush
out more code this would probably lead to an RFC for your approval.
Seems like no one is interested.
yeah, apparently.
(unrelated: thanks
Patrick,
I'd like to contribute to the project, so maybe this will be a good
place for me to start. Although the starbox 1 is limited by it's
capabilities, at least I can contribute to the completeness of device
support of the project. If you have the time and patience maybe you
could help me
On Monday 05 November 2007 07:02:27 am Steven Toth wrote:
Michael Krufky wrote:
[EMAIL PROTECTED] wrote:
I just picked up this card and I'm looking forward to trying it. I run
Fedora 7 x86_64 2.6.23-1.10. I guess I'll try the steps as described at
[EMAIL PROTECTED] wrote:
On Monday 05 November 2007 07:02:27 am Steven Toth wrote:
Michael Krufky wrote:
[EMAIL PROTECTED] wrote:
I just picked up this card and I'm looking forward to trying it. I run
Fedora 7 x86_64 2.6.23-1.10. I guess I'll try the steps as described at
Hi guys,
Would this apply to the hvr-1600 also? I've got both the hvr-1800 and 1600 in
two different HP media boxes running Vista.
Thanks
- Original Message
From: Steven Toth [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: linux-dvb@linuxtv.org; Michael Krufky [EMAIL PROTECTED]
Sent:
Randall Stewart wrote:
Hi guys,
Would this apply to the hvr-1600 also? I've got both the hvr-1800 and 1600
in two different HP media boxes running Vista.
Hi,
No.
Please comment/reply in the correct place, either at the end of the
email or inline if you're referencing someone's
Randall Stewart wrote:
- Original Message
From: Steven Toth [EMAIL PROTECTED]
To: Randall Stewart [EMAIL PROTECTED]
Cc: linux-dvb@linuxtv.org
Sent: Monday, November 5, 2007 1:37:05 PM
Subject: Re: [linux-dvb] hvr-1800 status?
Randall Stewart wrote:
Hi guys,
Would this apply to
All,
Does anyone gotten the SatBox from Geniatech to work?
Can anyone recommend a supported USB-2 DVB-S device that can be
acquired in the US?
Thank you,
Greg Suarez
___
linux-dvb mailing list
linux-dvb@linuxtv.org
Hi,
DVB-T has just arrived in our town.
I made a frequency file, that you can find in attachment.
It works perfectly.
Hoping this is the right place to post...
Best Regards
Olivier
/home/garet/fr-Nancy
Description: Binary data
___
linux-dvb mailing
22 matches
Mail list logo
