Il giorno Ven 22 Nov 2013 10:26:08 CET, RaSca ha scritto:
[...]
After this resources remains in stopped state. Why this happens? Am I in
this case: https://github.com/ClusterLabs/pacemaker/pull/334 ?
What kind of workaround can I use?
Thanks a lot, as usual.
I don't know if my problem
)
After this resources remains in stopped state. Why this happens? Am I in
this case: https://github.com/ClusterLabs/pacemaker/pull/334 ?
What kind of workaround can I use?
Thanks a lot, as usual.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra
by a single
ping resource.
Its still not clear to me if you have one ping resource or one ping resource
per vm... don't do the second one.
I've got many locations based on the same cloned resource (which is
named ping).
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi
Il giorno Gio 08 Ago 2013 01:07:06 CEST, Andrew Beekhof ha scritto:
On 08/08/2013, at 12:37 AM, RaSca ra...@miamammausalinux.org wrote:
[...]
The problem I got is that when I clone a VM (using virt-clone)
everything works fine until I try to add a new ping check.
Can you more precisely
.
Regards,
Ulrich
Hi Ulrich,
thanks for you answer, I can confirm that ping fails when we have got an
high load.
How do you have managed the monitors for each node? You have just
disabled them or you used some other work around?
Thanks,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da
of the nodes?
Thanks for your help,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org
Il giorno Ven 05 Apr 2013 15:29:36 CEST, RaSca ha scritto:
[...]
It seem that when a configuration message has to run over the ring, in
some particular cases, everything collapse. Following Florian's article
I've tried setting up a window_size of 300, but since everything is the
same, I think
crm_resource with -f, for forcing.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman
to set a
window_size LOWER than 50?
Thanks for your help,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http
asked (three years ago) about exportfs
(http://en.usenet.digipedia.org/thread/18978/8062/).
Bye,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA
versione 2.6.32-279.el6. I
just need to know if this error is a consequence of the original one
(NMI) or it is the cause. What I know is that it appeared after the NMI
error so, maybe, it is a consequence.
As I said, I will fill a bugzilla soon. Thanks again,
--
RaSca
Mia Mamma Usa Linux: Niente è
this.
Could someone point me to the documentation or give me an example on the
syntax?
Thanks,
Stefan
Did you took a look to Pacemaker Explained? In any case you can
configure a cron job that runs the time you want and launch crm
configure property default-resource-stickiness=0.
--
RaSca
Mia Mamma
pensi bene!
+39 3281776712
ra...@mmul.it
http://www.mmul.it
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
, although
it's a sick concept...
Decide whose fault it is... yours or the CRMs...
Regards,
Ulrich
Thank you Ulrich,
As far as you know, Is there a way to override the ID for each cloned
instance of the mysql resource? How can I resolve the problem?
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile
with the value of
interval then why I don't have errors even if I've got two slaves, which
means that I've got two identical intervals?
I hope to have made myself clear.
Thanks a lot,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http
and does not react.
What is wrong with this ms resource?
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http
is the same)? I can modify the docs by
myself and then submit the patch to Andrew.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux
,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also
, but how can one declare an anonymous clone? Is it
implicit with the globally-unique=false?
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Il giorno Mer 06 Giu 2012 17:35:03 CEST, Lars Marowsky-Bree ha scritto:
On 2012-06-06T17:26:41, RaSca ra...@miamammausalinux.org wrote:
Thank you Florian, but how can one declare an anonymous clone? Is it
implicit with the globally-unique=false?
You don't need to explicitly declare
?
Very Appreciated.gm
You may want to start from here:
http://www.clusterlabs.org/doc/en-US/Pacemaker/1.1/html/Clusters_from_Scratch/
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
(i.e.
ldirectord).
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo
in crm configure edit?
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman
. In addition it is possible to do a dump of the actual
configuration before doing any modifications.
That said... If you're reluctant to make a non specialist users modify
the configuration, then why let them modify delicate parameters such as
on-fail?
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da
Il giorno Gio 13 Ott 2011 09:28:33 CEST, RaSca ha scritto:
Il giorno Mer 12 Ott 2011 22:22:15 CEST, Rasto Levrinc ha scritto:
[...]
Well, LCMC doesn't handle k in this type of fields, as Caspar said.
Will be fixed. As a workaround you can set it to 131072.
Rasto
Clear, thanks.
With LCMC
Il giorno Mer 12 Ott 2011 22:22:15 CEST, Rasto Levrinc ha scritto:
[...]
Well, LCMC doesn't handle k in this type of fields, as Caspar said.
Will be fixed. As a workaround you can set it to 131072.
Rasto
Clear, thanks.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo
)
java.lang.Thread.run(Thread.java:662)
What the problem should be?
Please tell me also if this message is off topic for the list...
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
Il giorno Mer 12 Ott 2011 15:09:24 CEST, Rasto Levrinc ha scritto:
On Wed, Oct 12, 2011 at 2:49 PM, Caspar Smitc.s...@truebit.nl wrote:
Hi Rasca,
Probably the sndbuf-size (or any other variable) in drbd.conf is set to 128K
That shouldn't be a problem, normally. Rasca, what parameters are set
solved my problems, even if I think that just the timeouts have done the
trick, setting also the on-fail gives me more control over the errors on
the migrations, since a single vm migration failure does not make an
entire node fence.
Thanks,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da
was created? I repeat, I
totally agree with the fact that there are some problems with the RA but
until I find out exactly what's wrong I had to take care of all my
cluster's resources and so the most reasonable thing is to keep one
single failed vm stopped.
Thanks,
--
RaSca
Mia Mamma Usa
why a host fence (was:
Resource fail and node fence)) and I'm trying to understand where is
the problem.
Have you tried using another transport such ad tcp over sasl or tls?
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http
and it seems to be
this to make things broke up.
First tests with tcp show that it also needs the --p2p --tunnelled options. I
did not try sasl.
Greetings,
Very strange. I think that the problem may be somewhere else (network
connection, collisions, physical staff)...
--
RaSca
Mia Mamma Usa Linux
it.
Anyway, it doesn't explain why for me this version works correctly. If
you want I can send you my crm and libvirt configurations so we can do
some comparisons.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http
.
But if there parameters are really needed, the VirtualDomain has to be
patched.
Greetings,
This is for sure. Anyway this is my libvirt.conf:
listen_tls = 0
unix_sock_group = libvirt
unix_sock_rw_perms = 0770
auth_unix_ro = none
auth_unix_rw = none
I haven't changed anything else.
--
RaSca
, and this is not what the on-fail parameter is
meant to do.
Does someone have some suggestions on how to debug more this problem?
Please help!
Thanks a lot,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
interval=10 timeout=30 start-delay=0 on-fail=stop
Am I right?
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux
work.
Have you got a specific setup?
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA-Dev: Linux-HA-Dev@lists.linux-ha.org
http
Il giorno Lun 19 Set 2011 15:17:30 CEST, Michael Schwartzkopff ha scritto:
[...]
What transport do you use? Which version of libvirt?
Transport ssh, libvirt version is 0.9.2-7 (the squeeze-backports version).
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra
Il giorno Lun 19 Set 2011 17:55:58 CEST, Dejan Muhamedagic ha scritto:
Hi,
On Wed, Sep 14, 2011 at 09:43:43AM +0200, RaSca wrote:
Hi all,
I've got a two node pacemaker/corosync cluster with some virtual domain
resources on some DRBD devices.
Every DRBD device is configured in dual primary
for the virtual
domain. Is it the correct approach or is there a more elegant way to
obtain what I want?
Thanks to all,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
of all, forget about the CMS for now and concentrate on putting into the
cluster the service Apache. As I said, you need to check why in the
cluster configuration Apache does not works, and this reason is in the logs.
After that, installing the CMS will be trivial.
--
RaSca
Mia Mamma Usa Linux
Il giorno Mer 08 Giu 2011 11:53:54 CET, Alfredo Parisi ha scritto:
Ok thank you.
Now apache works on the virtual ip (10.10.7.100).
With crm_mon I haven't errors, this is my situation:
[...]
Now can I install the CMS? Thanks
I hope so :-)
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da
by looking for it's name BEFORE all those messages that shows
how it has been sent away from a node.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA
a wake-on-lan function that maybe
used, but there is no power off function and so, some kind of poweron
will be not useful.
Thanks for all your suggestions.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
you mean with this? What's the matter with the comments? The only way
I found to call ha_log.sh is with err, warn, info or debug.
How comments can be part of this?
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http
Il giorno Ven 27 Mag 2011 15:02:11 CET, RaSca ha scritto:
Il giorno Ven 27 Mag 2011 14:41:32 CET, Dejan Muhamedagic ha scritto:
Hi,
[...]
# Can't really be implemented because Hetzner webservice cannot power
on a system
Replace comments with ha_log.sh calls.
Hi Dej,
everything else
Il giorno Ven 27 Mag 2011 15:33:24 CET, Dejan Muhamedagic ha scritto:
[...]
Yes. It's because users cannot read comments that easily, they
usually look at the logs. If at all.
Cheers,
New (and hopefully last) version attached.
Bye,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire
a parameter.
The new version is attached.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
#!/bin/sh
#
# External STONITH module for Hetzner.
#
# Copyright (c) 2011 MMUL S.a.S. - Raoul Scarazzini ra...@mmul.it
Il giorno Gio 26 Mag 2011 11:13:46 CET, RaSca ha scritto:
[...]
The new version is attached.
Hi all,
After talking with Dejan on IRC, here it is the new version of the agent.
Major changes:
- The script do not relies anymore on SSH for checking the correct fence
of the device, instead
helpful?
Anyway, like Nikita said, consider upgrading Heartbeat to version 3.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA
need some corrections.
Hope this can help someone. Thanks to andreask who helped me on irc in
understanding how stonith agents works.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
#!/bin/sh
the script and post it again.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org
Il giorno Mar 24 Mag 2011 12:44:42 CET, RaSca ha scritto:
Il giorno Mar 24 Mag 2011 12:27:04 CET, Dejan Muhamedagic ha scritto:
[...]
P.S. Moving discussion to linux-ha-dev.
[...]
Sorry... I removed the wrong address and posted again on linux-ha :-(
--
RaSca
Mia Mamma Usa Linux: Niente è
is the best thing to do?
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman
, with a brief lunch included, everything offered
by MMUL.
Let me say that without your every-day help, this event would have never
been possible.
Have a nice day,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http
go away it becomes slave?
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org
to do what I'm doing?
Thanks a lot!
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org
as I remember the master suggestion was to use ping instead of
pingd, so... Try ping.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing
Il giorno Mer 27 Apr 2011 12:04:57 CET, Stallmann, Andreas ha scritto:
Hi!
-Ursprüngliche Nachricht-
Von: RaSca [mailto:ra...@miamammausalinux.org]
Gesendet: Mittwoch, 27. April 2011 11:28
As far as I remember the master suggestion was to use ping instead of pingd,
so... Try ping
for being so late in answering to the thread, I've been a
little busy. I'm happy to read that @linux-ha is still the best place
for making doubts fly away.
Have a nice day!
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http
) in the cloned group nfs_clone.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman
was removing first exportfs).
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman
are in the same HA cluster
as the node where I am (knowing that corosync is stopped on this
local node) .
Thanks
Regards.
Alain
This might sound obvious but is an ssh call acceptable?
What about:
cat /var/lib/heartbeat/crm/cib.xml|grep node id|sed -n
's/.*uname=\\(.*\)\.*/\1/p'
?
--
RaSca
) and then understand who
is in the cluster...
This should be real time informations, and not (possible) old xml file...
Hope this helps,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
simple with exportfs, but basically impossible with nfsserver (unless
you split you configuration, your nfs daemon and so on).
Have a nice day.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
Il giorno Mar 22 Mar 2011 11:01:25 CET, Caspar Smit ha scritto:
I basically had the same question as Christopher :)
Thanks for the great clarification RaSca!
I'll go for exportfs and lsb:nfs-kernel-server for sure.
Kind regards,
Caspar Smit
One is glad to be of service :-)
In my experience
anyway)
Kind regards,
Caspar
I made groups just to preserve a logical order: first portmap, then
nfs-common and then nfs-kernel-server.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
... Of course, translators are welcome ;-)
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux
\
stonith-enabled=false \
last-lrm-refresh=1300276063
I omitted the nfs server part in my article because explaining also that
part would make the article even longer...
Bye,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra
table. It's your choice to put nfs server under the
control of the cluster (maybe with a cloned resource group composed by
portmap, nfs-common and nfs-kernel-server) or not.
Bye,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http
/lib/ocf/resource.d/linbit/drbd exists? Is the drbd
file executable? Have you correctly installed the drbd packages?
Check those things, you can try to reinstall drbd.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http
even try to run the resource agent manually, by going into the
/usr/lib/ocf/resource.d/linbit/ and setting the environmental variables
needed, and see what happens.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http
Il giorno Ven 11 Mar 2011 11:15:03 CET, RaSca ha scritto:
[...]
This is a little bit strange. If you are sure about the drbd setup than
the no such resource agent error should not be present. What is your
pacemaker version? It might be a bug (on google there are some cases of
this kind
resource agent
works great.
Have a great day!
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http
. There's something with
the discovery that fails, but now the RA is patched. Look at the thread
Here again with my problem with iscsi resource agent.
Thanks a lot for your help!
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
Il giorno Mar 18 Gen 2011 11:20:13 CET, Florian Haas ha scritto:
On 01/04/2011 11:56 AM, Tobias Appel wrote:
On 12/28/2010 06:46 PM, Dejan Muhamedagic wrote:
40 order constraints? A big cluster.
We have currently 40 VM's (XEN) on it. I can't put them in a group since
they have to run
Il giorno Mar 18 Gen 2011 12:13:15 CET, Erik Dobák ha scritto:
Hi people,
i got my active/passive cluster running. when i start the first node all
resources are started. but when i start the second node, all resources are
stoped on the first node and started on the second node. why? do i
Il giorno Mar 18 Gen 2011 16:11:13 CET, Pavlos Polianidis ha scritto:
Dear Andrew
So is there any solution to make the quorum operate?
Thanks in advance
Pavlos Polianidis
How your no-quorum-policy is set?
--
Raoul Scarazzini
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi
Il giorno Ven 14 Gen 2011 17:34:10 CET, RaSca ha scritto:
[...]
I can say for sure that we will surely know. As you can see, in all of
my posts (and projects) I never give up until there is a clear solution
to the problem. I will find out also in this case.
Thanks again,
Dejan, here I am
(add/remove) using open-iscsi
#
# Developed by RaSca (ra...@miamammausalinux.org)
# Copyright (C) 2010 MMUL S.a.S., All Rights Reserved.
# Based upon the Resource Agent iscsi by Dejan Muhamedagic de...@suse.de
#
# This program is free software; you can redistribute it and/or modify
# it under
Il giorno Ven 14 Gen 2011 16:07:42 CET, Dejan Muhamedagic ha scritto:
[...]
Unfortunately, it cannot really improve situation in any way.
Dropping half the agent and not knowing where is the problem is
not helpful. At least not if you want to share your findings
with the community.
I
Il giorno Gio 13 Gen 2011 13:22:26 CET, Dejan Muhamedagic ha scritto:
Hi,
Hi Dej and thanks as usual for you precious support.
[...]
iscsiadm fails in probe with the following messages:
Jan 13 12:15:19 debian-squeeze-nodo2 lrmd: [12063]: info: RA output:
(www_db-iscsi:probe:stderr)
Il giorno Gio 13 Gen 2011 13:57:28 CET, Dejan Muhamedagic ha scritto:
Hi,
[...]
The patch applies, but the resource fails to startup with:
Failed actions:
www_db-iscsi_monitor_0 (node=debian-squeeze-nodo1, call=39,
rc=4, status=complete): insufficient privileges
Hi all,
I've got two group of resources, say A and B. A depends on B, so if B
isn't up A must NOT be started. This is the situation:
group B Bres1 Bres2 Bres3
colocation B_ON_B_ms-r1 inf: B B_ms-r1:Master
order B_AFTER_B_ms-r1 inf: B_ms-r1:promote B:start
group A Ares1 Ares2 Ares3
colocation
Il giorno Mar 11 Gen 2011 13:36:58 CET, RaSca ha scritto:
Hi all,
I've got two group of resources, say A and B. A depends on B, so if B
isn't up A must NOT be started. This is the situation:
group B Bres1 Bres2 Bres3
colocation B_ON_B_ms-r1 inf: B B_ms-r1:Master
order B_AFTER_B_ms-r1 inf
Il giorno Mar 04 Gen 2011 12:13:48 CET, Erik Dobák ha scritto:
[...]
i have found this http://www.linux-ha.org/doc/re-ra-jboss.html but am simply
not able to understand where this:
primitive example_jboss ocf:heartbeat:jboss \
params \
jboss_home=*string* \
op monitor depth=0
Il giorno Lun 20 Dic 2010 13:20:42 CET, RaSca ha scritto:
[...]
What am I missing?
As discussed with Andrew on IRC the problem is fixed by removing the
parenthesis from the order and colocation's declarations.
--
Raoul Scarazzini
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo
Hi all,
I've got two group of resources, say A and B. Suppose this is the situation:
group A:
colocation B_ON_B_ms-r1 inf: ( B_ip ) ( B_iscsitarget-lun ) (
B_iscsitarget-export ) B_ms-r1:Master
order B_AFTER_B_ms-r1 inf: B_ms-r1:promote ( B_iscsitarget-export:start
) ( B_iscsitarget-lun:start
Il giorno Mar 30 Nov 2010 11:38:39 CET, Michael Kromer ha scritto:
Hi,
I've never seen a real LSB-conform init script of jboss, but the one
getting real close I know is
http://www.riccardoriva.com/shared-files/jboss_init_script
You might need to strip out the oracle stuff defined in there,
Il giorno Mar 30 Nov 2010 11:55:50 CET, Michael Kromer ha scritto:
right, for reference:
http://www.linux-ha.org/doc/re-ra-jboss.html
I just recommend to take a safe look at the timeouts, as 60s could be
too short for some larger applications.
- mike
I confirm. I had to put 240s in some
Hi Guys,
working with some java batch programs I needed to configure the anything
resource agent. I found that there's no way to define the working
directory from where the executable must be launched.
So I solved my problem patching the resource agent to support the
workdir parameter, by
Il giorno Gio 28 Ott 2010 14:45:32 CET, Miles Fidelman ha scritto:
[...]
Any suggestions?
I found a similar problem by using the wrong console:
http://groups.google.com/group/ganeti/browse_thread/thread/639f297c738e5adb
I was using ganeti, but it can't be much different.
Bye,
--
Raoul
that my problems created such a discussion!
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http
.
Bye,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
relations?
Thanks a lot!
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman
declaration, it will be surely
useful.
Thanks a lot Dejan!
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http
articles are written in Italian, but I hope you will enjoy
anyway.
Keep up the good work! And thanks again for the help you give me anytime.
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
of the information
you need (including how RedHat and Fedora prefer corosync instead of
heartbeat).
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing
the documentation at http://www.linux-ha.org/doc/
[...]
I strongly recommend you to give a look at Clusters From Scratch, here:
http://www.clusterlabs.org/doc/en-US/Pacemaker/1.1/html/Clusters_from_Scratch/
It will be helpful to understand how the cluster can be configured from
start.
--
RaSca
Mia
a good day,
--
RaSca
Mia Mamma Usa Linux: Niente è impossibile da capire, se lo spieghi bene!
ra...@miamammausalinux.org
http://www.miamammausalinux.org
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux
1 - 100 of 130 matches
Mail list logo
