On 04/15/10 07:20, Daniel Mack wrote:
On Wed, Apr 14, 2010 at 11:35:54PM +0100, Alan Cox wrote:
Would it be possible to make the existing driver for the ISL29003
support the ISL29020 as well?
I dug the manuals out for these to take a look - the answer is they are
quite different chips.
On 15/04/10 01:05, Neil Brown wrote:
:
The Openmoko Freerunner has as lis302D which is an SPI version of a very
similar device, so making the one driver work on that was well would be nice
if possible.
Definitely!
The lis302d can detect threshold crossings and taps as well as simple
On 04/14/10 23:12, Éric Piel wrote:
Op 14-04-10 14:52, Alan Cox schreef:
From: Kalhan Trisal kalhan.tri...@intel.com
The acceleremeter driver reads the x,y,z coordinate registers and provides
the information to user through the input layer
Conversion to input device, clean up and porting of
On 04/14/10 18:01, Greg KH wrote:
On Wed, Apr 14, 2010 at 05:56:02PM +0100, Alan Cox wrote:
And this adds the isl29020 as a misc device per discussions
isl29020: ambient light sensor
From: Kalhan Trisal kalhan.tri...@intel.com
The LS driver will read the latest Lux measurement based upon
This patch introduces driver for Rohm BH1770GLC and Osram SFH7770
combined ambient light and proximity sensor.
Driver is divided to 3 parts. Core-part contains common functionality for
both parts of the chips. ALS and PS specific functionalities are
in separate files.
ALS part is fully based on
Driver for combined ambient light and proximity sensor.
BH1770GLC and SW compatible SFH7770 sensors are supported.
Signed-off-by: Samu Onkalo samu.p.onk...@nokia.com
---
drivers/misc/Kconfig | 12 +
drivers/misc/Makefile |3 +
drivers/misc/bh1770glc.h | 169
Under certain rare conditions, I2C_STAT[13].RDR bit may be set
and the corresponding interrupt fire, even there is no data in
the receive FIFO, or the I2C data transfer is still ongoing.
These spurious RDR events must be ignored by the software.
This patch handles and ignores RDR spurious
lux- illuminance0_input (or I guess lux0_input would also work, I can change
the iio abi to match this as well).
It also occurs to me that we might want to associate the calibration with the
particular channel? There's sure to be a dual ALS chip along at some point.
Obviously the
On Thu, 15 Apr 2010 13:34:07 +0300, Samu Onkalo wrote:
This patch introduces driver for Rohm BH1770GLC and Osram SFH7770
combined ambient light and proximity sensor.
I fail to see why this is being sent to the lm-sensors list.
--
Jean Delvare
--
To unsubscribe from this list: send the line
Hi Samu,
This patch introduces driver for Rohm BH1770GLC and Osram SFH7770
combined ambient light and proximity sensor.
Driver is divided to 3 parts. Core-part contains common functionality for
both parts of the chips. ALS and PS specific functionalities are
in separate files.
ALS part
On Thu, 15 Apr 2010 13:26:43 +0200
Jean Delvare kh...@linux-fr.org wrote:
On Thu, 15 Apr 2010 13:34:07 +0300, Samu Onkalo wrote:
This patch introduces driver for Rohm BH1770GLC and Osram SFH7770
combined ambient light and proximity sensor.
I fail to see why this is being sent to the
Argument alignment
Makes it take more space
Spacing
Mostly dropped
Make chars static
Not sure I see the point (compiler generates good code anyway)
Remove prefixes from dev_level logging
Good point.
--
To unsubscribe from this list: send the line unsubscribe linux-i2c in
the body of a
Hi,
Manjunatha GK wrote:
Under certain rare conditions, I2C_STAT[13].RDR bit may be set
and the corresponding interrupt fire, even there is no data in
the receive FIFO, or the I2C data transfer is still ongoing.
These spurious RDR events must be ignored by the software.
This patch handles
Hi Michael,
Sorry for the long delay. Here finally comes a review of your code.
On Mon, 25 Jan 2010 13:13:48 +0100, Michael Lawnick wrote:
Subject: [PATCH 1/2] i2c: Multiplexed I2C bus core support.
Signed-off-by: Rodolfo Giometti giome...@linux.it
Signed-off-by: Michael Lawnick
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
+if (ts-tc.event_sended == false) {
We set event_sended to false immediately before calling
cy8ctmg110_send_event() so I do not see the point of this flag.
On that note:
$ git grep -n sended
drivers/net/eth16i.c:1295:
how
On Thu, Apr 15, 2010 at 07:41:22PM -0400, Rafi Rubin wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
+ if (ts-tc.event_sended == false) {
We set event_sended to false immediately before calling
cy8ctmg110_send_event() so I do not see the point of this flag.
On that note:
$
16 matches
Mail list logo