Promise SATA300 TX4: errors, oops in ext3 code

Hardware: Athlon64, Asus A8V, Promise SATA300 TX4, 2xSeagate 7200.10 320G, jumper-limited to SATA150. Kernel : 2.6.22.9 amd64 Problem: Heavy load causes errors and triggers oops. History: Problems were first encountered on kernel 2.6.19, both i686 (old system) and amd64 (gentoo installation

Re: Promise SATA300 TX4: errors, oops in ext3 code

Alexander Sabourenkov schrieb: Hardware: Athlon64, Asus A8V, Promise SATA300 TX4, 2xSeagate 7200.10 320G, jumper-limited to SATA150. Kernel : 2.6.22.9 amd64 Problem: Heavy load causes errors and triggers oops. Have you checked your memory already (memtest86)? We have several applications

Re: Promise SATA300 TX4: errors, oops in ext3 code

Clemens Koller wrote: Alexander Sabourenkov schrieb: Hardware: Athlon64, Asus A8V, Promise SATA300 TX4, 2xSeagate 7200.10 320G, jumper-limited to SATA150. Kernel : 2.6.22.9 amd64 Problem: Heavy load causes errors and triggers oops. Have you checked your memory already (memtest86)?

Re: Polling (was Re: [PATCHSET 2/2] implement PMP support, take 6)

Mark Lord wrote: Linux kernel development is supposed to happen incrementally nowadays. Get a nice working solution in place, and then enhance/tune it. It's not about enhancing and tuning. It's about me (and/or James B) having to __undo__ the current code, just to get things working on an

ata1.00: spurious completions during NCQ

Hi, On 15 August 2007 Tejun Heo wrote: You don't need to worry too much as long as errors are properly, recovered. All commands are retried and you won't lose any data. Please report if the spurious NCQ problem happens again. Thanks. I've just received a logcheck mail with another one. I

Re: [PATCH] pata_hpt3x2n: Clean up DPLL stuff

Hello. Alan Cox wrote: Nobody commented when I asked for review earlier so it must be ok 8) It's not that I've seen this before so it must be ok 8) Not by me at least, so let me NAK it. 8-) Lets stick it in -mm to be sure Now let's unstick it. :-) Signed-off-by: Alan Cox

linux-2.6.18 reiserfs on raid1 blocks io until rebooted - why?

Hi, there! Can someone please put some light on what happened here: Short story: linux kernel 2.6.18 block i/o on file access on reiserfs on raid1. Long story: Sorry, for the long mail... I just try to give all details. On one of our old simple samba file servers, I ran into a strange problem

PMP Patchset against 2.6.22.latest 2.6.23.latest

Hello Tejun, i am stuck with 2.6.22.1 because this is the latest version of your PMP patchset...this is perfectly working but i can not apply these set against newer versions of the kernel...could you update your homepage or post a howto/message/link for instructions to get the patchset against

Re: PMP Patchset against 2.6.22.latest 2.6.23.latest

Daniel Schroeder wrote: i am stuck with 2.6.22.1 because this is the latest version of your PMP patchset...this is perfectly working but i can not apply these set against newer versions of the kernel...could you update your homepage or post a howto/message/link for instructions to get the

RE: ICH9 2 port SATA controller port map?

What is the difference between NA and RV? If the controller only has access to 2 ports, does it matter which I set the nonexistent port values to in the map? NA is used for unimplemented ports of a valid configuration while RV is used to mark invalid MAP value. So, NA should be mixed with

Re: Serial ATA does not find partitions (Hitachi HD, new? ATI controller) where old SATA works

Tejun netconsole, pritty nice debunging system... but (yes, there is always a but) it does not get to run. the method was well implemented, adding the acpi=off it sends the information to the receiving machine (I can even see passing a netconsole probing message in the machine under

Re: Maxtor 6L200M0 sata irq timeouts

Hello (please CC me when replying) On 27/09/2007, Tejun Heo [EMAIL PROTECTED] wrote: Michal Suchanek wrote: On 11/09/2007, Tejun Heo [EMAIL PROTECTED] wrote: Michal Suchanek wrote: What does 'smartctl -a /dev/sda' say? Attaching output. Hmmm... How often does the condition occur?

western digital WD800ADFS ncq problems

(please cc me, as i´m not subscribed to linux-kernel/ide - thanks) hi, we have some Fujitsu Siemens Celsius M450 workstations (Intel 975X Express chipset) running Linux Kernel 2.6.22 (Debian, Ubuntu) on an md raid 1 using two Western Digital Raptor drives, it´s the WD800ADFS which is an oem

sata_nv in 2.6.23-rc8 only detects one of two controllers

2.6.18: libata version 2.00 loaded. sata_nv :00:07.0: version 2.0 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20 GSI 18 sharing vector 0xE9 and IRQ 18 ACPI: PCI Interrupt :00:07.0[A] - Link [LTID] - GSI 20 (level, low) - IRQ 233 PCI: Setting latency timer of device :00:07.0 to 64

Re: [patch] SB700 contains more than one IDE channel

On Thursday 27 September 2007, Shane Huang wrote: From: [EMAIL PROTECTED] SB700 supports one physical IDE channel, but SB700 SATA controller supports combined mode. When the SATA combined mode is enabled, two SATA ports(port4 and port5) share one IDE channel from IDE controller, and PATA

Re: [PATCH 4/4] hpt366: MWDMA filter for SATA cards (take 2)

On Saturday 29 September 2007, Sergei Shtylyov wrote: The Marvell bridge chips used on HighPoint SATA cards do not seem to support the MWDMA modes (at least that caould be seen in their so-called drivers :-), so the driver needs to account for this -- to achieve this: - add mdma_filter()

[PATCH 1/15] ali14xx: fix deadlock on error handling

Stop abusing ide_lock lock by switching to a private locking. Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] --- drivers/ide/legacy/ali14xx.c |6 -- 1 file

[PATCH 2/15] dtc2278: fix deadlock on error handling

Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] --- drivers/ide/legacy/dtc2278.c |6 -- 1 file changed,

[PATCH 3/15] qd65xx: fix deadlock on error handling

Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] --- drivers/ide/legacy/qd65xx.c | 17 + 1

[PATCH 5/15] slc90e66: fix deadlock on error handling

* Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] --- drivers/ide/pci/slc90e66.c |

[PATCH 4/15] opti621: fix deadlock on error handling

* Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] --- drivers/ide/pci/opti621.c |

[PATCH 6/15] cmd640: fix deadlock on error handling

Stop abusing ide_lock lock (switch to a private locking). Fixes same issue as fixed by Alan Cox in atiixp host driver with commit 6c5f8cc33eb2e10b6ab788bbe259fc142a068627. cmd640 is a bit special cause we still need to leave ide_lock for -set_pio_mode with 'pio' argument == 8/9 (prefetch

[PATCH 9/15] cs5530: remove needless ide_lock taking

Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] --- drivers/ide/pci/cs5530.c |8 +--- 1 file changed, 1 insertion(+), 7 deletions(-) Index: b/drivers/ide/pci/cs5530.c === --- a/drivers/ide/pci/cs5530.c +++

[PATCH 10/15] ide: enhance ide_setup_pci_noise()

* Print PCI device Vendor ID, Device ID and revision in ide_setup_pci_noise(). * Remove no longer needed PCI device revision printing from ide_setup_pci_controller(). Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] --- drivers/ide/setup-pci.c |8 +++- 1 file changed, 3

[PATCH 13/15] ide: use __ide_end_request() in ide_end_dequeued_request()

* Remove dead code for handling IDE TCQ from ide_end_dequeued_request(). * Add 'dequeue' parameter to __ide_end_request(). * Use __ide_end_request() in ide_end_dequeued_request(). Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] --- drivers/ide/ide-io.c | 44

[PATCH 15/15] ide: remove stale comments from ide-taskfile.c

Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] --- drivers/ide/ide-taskfile.c | 23 --- 1 file changed, 23 deletions(-) Index: b/drivers/ide/ide-taskfile.c === --- a/drivers/ide/ide-taskfile.c +++

[PATCH 12/15] ide: remove -dma_master field from ide_hwif_t

* Convert cmd64x, hpt366 and pdc202xx_old host drivers to use pci_resource_start(hwif-pci_dev, 4) instead of hwif-dma_master. * Remove no longer needed -dma_master field from ide_hwif_t. Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] --- drivers/ide/ide-dma.c |7

[PATCH 14/15] ide: remove dead code from ide_driveid_update()

* Remove dead code from ide_driveid_update(). While at it: * Remove useless comment. * s/HWIF(drive)/drive-hwif/ Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] --- drivers/ide/ide-iops.c | 26 +++--- 1 file changed, 3 insertions(+), 23 deletions(-) Index:

Re: [PATCH 12/15] ide: remove -dma_master field from ide_hwif_t

Bartlomiej Zolnierkiewicz wrote: * Convert cmd64x, hpt366 and pdc202xx_old host drivers to use pci_resource_start(hwif-pci_dev, 4) instead of hwif-dma_master. Before using pci_resource_start(), the code should check pci_resource_len() to ensure it is the appropriate size. It would be very

Re: [PATCH 12/15] ide: remove -dma_master field from ide_hwif_t

On Monday 01 October 2007, Jeff Garzik wrote: Bartlomiej Zolnierkiewicz wrote: * Convert cmd64x, hpt366 and pdc202xx_old host drivers to use pci_resource_start(hwif-pci_dev, 4) instead of hwif-dma_master. Before using pci_resource_start(), the code should check pci_resource_len() to

[regression] 2.6.23 sata_mv EH updates broke my 7042 controller

Hi, I just pulled out my Marvell 7042 SATA controller here to give it a spin and noticed that it no longer worked (i.e. init segvs when loading from it), etc. 2.6.22 is fine. Bisecting (just the file drivers/ata/sata_mv.c) resulted in bdd4dddee325a7dce3e84cf48201a06aa8508aa4 popping out as the

Re: [regression] 2.6.23 sata_mv EH updates broke my 7042 controller

Olof Johansson wrote: Hi, I just pulled out my Marvell 7042 SATA controller here to give it a spin and noticed that it no longer worked (i.e. init segvs when loading from it), etc. 2.6.22 is fine. Bisecting (just the file drivers/ata/sata_mv.c) resulted in

libata-add-human-readable-error-value-decoding-v3.patch (was: -mm merge plans for 2.6.24)

Andrew Morton wrote: libata-add-human-readable-error-value-decoding-v3.patch I think I own this now. Will send to jgarzik then drop it if it doesn't stick. Another plug for this one, as the author. I really don't think one can object to it, and it definitely seems useful. -- Robert

Re: Polling (was Re: [PATCHSET 2/2] implement PMP support, take 6)

Jeff Garzik wrote: Polling PMP 2.6.24 is completely unacceptable. It screws the 2.6.24 SAS driver releases out of PMP. Not merging PMP has about the same effect for SAS, right? I pulled your last PMP patchset, and will now endeavor to fix the API prior to 2.6.24 merge window opening. I

Re: Polling (was Re: [PATCHSET 2/2] implement PMP support, take 6)

Jeff Garzik wrote: Mark Lord wrote: Linux kernel development is supposed to happen incrementally nowadays. Get a nice working solution in place, and then enhance/tune it. It's not about enhancing and tuning. It's about me (and/or James B) having to __undo__ the current code, just to get

Re: Strange arbitrary port resets on ICH9R with Seagate drives

On Mon, 01 Oct 2007 01:30:59 +0100, Jonathan Bell [EMAIL PROTECTED] wrote: Hello I've just purchased a brand spanking new G33/ICH9R based system for use as a home fileserver with 4x ST3750840AS Seagate SATA drives as the main grunt drives. The problem is that all of the seagate drives

Re: [regression] 2.6.23 sata_mv EH updates broke my 7042 controller

On Mon, Oct 01, 2007 at 06:37:44PM -0400, Jeff Garzik wrote: Olof Johansson wrote: Hardware config in my case: Highpoint 2310 controller PPC (big endian) WD Raptor disk Works fine with the other controller I've been using (SIL24), and works fine if I revert the driver. It also works fine

Re: Promise SATA300 TX4: errors, oops in ext3 code

Have you checked your memory already (memtest86)? [...] Again... sounds like bad memory to me. Nightly memtest86 run : 11 hours, 23 passes, 0 errors. -- ./lxnt - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED]