debian shutdown info

2007-10-20 Thread listmail
I was still getting this message on Debian sid w/kernel 2.6.22.6 and I could hear my drive spin back up before the PC went completely off. This was the fix which was a small edit on the /etc/init.d/halt script. It worked on two boxes.

Re: New CD/DVD drive - 80-wire cable detection failure

2007-10-20 Thread Nick Warne
On Friday 19 October 2007 23:28:21 Bartlomiej Zolnierkiewicz wrote: On Saturday 20 October 2007, Nick Warne wrote: On Friday 19 October 2007 22:44:27 Bartlomiej Zolnierkiewicz wrote: hdparm -I It should have been hdparm --Istdout (sorry, once again). hdparm --Istdout /dev/hdd /dev/hdd:

AHCI with ATA/IDE Drives

2007-10-20 Thread Girish Shirasat
Hello All, I have a Core 2 Duo Intel 3100 chipset SBC. Of the six ports supported by the SATA controller ,three have been routed to SST based 512MB NAND flashes which provide ATA/IDE compatible interface.One of the three NAND flash is on AHCI only port so to access it I need to enable the

Re: New CD/DVD drive - 80-wire cable detection failure

2007-10-20 Thread Nick Warne
Hi all, SOLVED! On Saturday 20 October 2007 10:37:31 Nick Warne wrote: On Friday 19 October 2007 23:28:21 Bartlomiej Zolnierkiewicz wrote: On Saturday 20 October 2007, Nick Warne wrote: On Friday 19 October 2007 22:44:27 Bartlomiej Zolnierkiewicz wrote: hdparm -I It should have

Re: Fwd: CMD 64x regression from 2.6.21 to 2.6.22 and 2.6.23?

2007-10-20 Thread Sergei Shtylyov
Hello. Martin Rogge wrote: 00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: medium devsel [virtual] Memory at 01f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 03f0 (type 3,

Re: Fwd: CMD 64x regression from 2.6.21 to 2.6.22 and 2.6.23?

2007-10-20 Thread Sergei Shtylyov
Martin Rogge wrote: 00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: medium devsel [virtual] Memory at 01f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 03f0 (type 3, non-prefetchable)

Re: [PATCH 10/12] ide: add ide_tf_load() helper

2007-10-20 Thread Sergei Shtylyov
Hello. Bartlomiej Zolnierkiewicz wrote: Based on the earlier work by Tejun Heo. * Add 'tf_flags' field (for taskfile flags) to ide_task_t. * Add IDE_TFLAG_LBA48 taskfile flag for LBA48 taskfiles. * Add IDE_TFLAG_NO_SELECT_MASK taskfile flag for __ide_do_rw_disk() which doesn't use

Re: [PATCH 4/12] ide-disk: add get_smart_data() helper

2007-10-20 Thread Sergei Shtylyov
Bartlomiej Zolnierkiewicz wrote: Merge get_smart_values() and get_smart_thresholds() into get_smart_data() helper. Signed-off-by: Bartlomiej Zolnierkiewicz [EMAIL PROTECTED] Acked-by: Sergei Shtylyov [EMAIL PROTECTED] MBR, Sergei - To unsubscribe from this list: send the line unsubscribe

Re: [patch] PCI: disable MSI on more ATI NorthBridges

2007-10-20 Thread Benjamin Herrenschmidt
On Fri, 2007-10-19 at 16:21 -0400, Jeff Garzik wrote: Take a look at tg3.c net driver change 2fbe43f6f631dd7ce19fb1499d6164a5bdb34568 which is a similar situation. However, it may turn out that removing the pci_intx() stuff as a general rule is easier than quirking these devices, if

Re: Sata Sil3512 bug?; Promise SATA300 TX4

2007-10-20 Thread Alexander Sabourenkov
Hello. Tejun Heo wrote: Does the attached patch help? It does somehow force 1.5GB/s mode, and it does change the pattern of 'configured for UDMAxxx' messages that come along with errors, and it causes the following error: ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb t4 ata3: