On Sat, 30 Apr 2005, Tzahi Fadida wrote:
Well, I tried to do the O_DIRECT but its not so simple as just adding
and just using the posix_memalign.
errr... why? cause the buffer sizes must also be multiples of 512 bytes
each?
Anyway, I was trying something else.
I disabled the swap file to
On Thu, 28 Apr 2005, Gil Freund wrote:
I have Debian installed on two servers, and IBM Netfinity 5000 and an
HP Proliant DL380, and I would like to make the most of their service
ports.
The DL380 has the service port redirected to ttyS0. I can see the the
BIOS boot sequence via minicom,
Aviram Jenik wrote:
On Friday 29 April 2005 10:33, Patrick Kariuki wrote:
Has anyone fully implemented asterisk with their office phone system
without any glitch?
Yup, we did.
Same here.
I know of more Israeli deployments and did some myself.
Gilad
On Fri, 29 Apr 2005, Gil Freund wrote:
On 4/29/05, guy keren [EMAIL PROTECTED] wrote:
perhaps you didn't dig into the thing - it uses the linux system as a
console OS, not as a host OS. the guest machines do not run on top of this
linux system at all. all the device drivers that are
Is this a DL380 G1, or G2?
The DL380 G2 has this kind of management port (called an iLO in this
series, Integrated Lights Out). During bootup you can configure it by
pressing F8 somewhere along the process. As guy said, after you
configure it correctly (and connected it to the net), you can surf
On 4/30/05, Itay Duvdevani [EMAIL PROTECTED] wrote:
Is this a DL380 G1, or G2?
It's a G1 (ServerWorks CNB20HE).
I can see the service processor in lspci:
:00:06.0 System peripheral: Compaq Computer Corporation Advanced
System Management Controller
The DL380 G2 has this kind of management
On 4/30/05, guy keren [EMAIL PROTECTED] wrote:
On Thu, 28 Apr 2005, Gil Freund wrote:
I have Debian installed on two servers, and IBM Netfinity 5000 and an
HP Proliant DL380, and I would like to make the most of their service
ports.
The DL380 has the service port redirected to
On 4/30/05, guy keren [EMAIL PROTECTED] wrote:
On Fri, 29 Apr 2005, Gil Freund wrote:
On 4/29/05, guy keren [EMAIL PROTECTED] wrote:
[snip]
consider the differences between suzuky swift and suzuky baleno. the swift
has all the functionality of the baleno - they both have 4 wheels, an
Hi Lior,
Do you think any connection to a foreign Arab LUG could benefit anything ?
Miguel's photos from the Lebanese LUG show quite a casual LUG. Then
again, in this opportunity, I must note that despite the arab population
being a _lot_ larger than ours, the amount of contributors to Free
On Sat, 30 Apr 2005, Tzahi Fadida wrote:
Well, I tried to do the O_DIRECT but its not so simple as
just adding
and just using the posix_memalign.
errr... why? cause the buffer sizes must also be multiples of
512 bytes each?
well, 512 bytes aligned. But what they do is use one
Hi,
I have to shrink a bit my single Reiserfs 3.6 filesystem to make room
for Ubuntu (which I'd like to install, not just experiment).
It looks like it should be strigh-forward, with GNU Parted doing the both
the filesystem and partition resizing in one go
(e.g.
On Sat, Apr 30, 2005 at 09:41:53PM +1000, Amos Shapira wrote:
It looks like it should be strigh-forward, with GNU Parted doing the both
the filesystem and partition resizing in one go
(e.g. http://www.newsforge.com/os/03/10/07/2028234.shtml).
Last time I tried, working with parted made it
On 4/30/05, Tzafrir Cohen [EMAIL PROTECTED] wrote:
On Sat, Apr 30, 2005 at 09:41:53PM +1000, Amos Shapira wrote: It looks like it should be strigh-forward, with GNU Parted doing the both the filesystem and partition resizing in one go (e.g.
http://www.newsforge.com/os/03/10/07/2028234.shtml).Last
On 4/30/05, Amos Shapira [EMAIL PROTECTED] wrote:
Hi,
I have to shrink a bit my single Reiserfs 3.6 filesystem to make room
for Ubuntu (which I'd like to install, not just experiment).
I have good experience with resize_reiserfs. However I did this on
LVM. Parted scared me :)
It
On Sat, Apr 30, 2005 at 02:35:32PM +0200, Tzahi Fadida wrote:
btw, the cache does not seem to drop under 5mb for some
reason. I am interested to know why.
Things that are used are cached. You're always using *something*.
Cheers,
Muli
--
Muli Ben-Yehuda
http://www.mulix.org |
This Monday (2/5/2005), 18:30, the Haifa Linux Club will once
again meet to hear alon Altman talk about:
Firewall Piercing
Abstract:
In this lecture I will present the art and practice of Firewall piercing,
that is (ab)using a network you are connected to but not totally control
Yeah, but if you do a sequential scan of a big something the cache
will never be actually used (at least for it).
Of course, I am talking about non-executable files.
It also caches executable files which is what we use right?
Question is, if it includes those executable files in the cached in
top.
On Sat, Apr 30, 2005 at 08:30:03PM +0200, Tzahi Fadida wrote:
It also caches executable files which is what we use right?
Yes, as well as libraries and anything else you read off of the disk
(e.g. metadata).
Question is, if it includes those executable files in the cached in
top.
Check
-Original Message-
From: Muli Ben-Yehuda [mailto:[EMAIL PROTECTED]
Sent: Saturday, April 30, 2005 7:49 PM
On Sat, Apr 30, 2005 at 08:30:03PM +0200, Tzahi Fadida wrote:
Better that it not, since I don't need the code to keep reloading
also. Not that it really matters since my
On Sat, Apr 30, 2005 at 09:20:18PM +0200, Tzahi Fadida wrote:
I don't want to count dumping and reloading from storage my code
just the data, but I think block_dump will not know the difference.
Obvious solution is to put the data (and only the data) on another
block device (e.g. disk,
-Original Message-
From: Muli Ben-Yehuda [mailto:[EMAIL PROTECTED]
Sent: Saturday, April 30, 2005 8:26 PM
On Sat, Apr 30, 2005 at 09:20:18PM +0200, Tzahi Fadida wrote:
I don't want to count dumping and reloading from storage my
code just
the data, but I think block_dump
Maybe there is another way.
Is there a way to also count the cache hits on blocks and not only
cache misses as I do with block_dump per process?
Regards,
tzahi.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the
CVS on steroids atomic commits we all heard of those nice slogans...
So I installed one of those toys on a Debian-testing server only to
found out that after each import of the repository the Berkly data base
gets corrupted. The only way to recover it is using svnadmin recover
On 4/30/05, Diego Iastrubni [EMAIL PROTECTED] wrote:
I have heard many disaster stories from SVN. One of them is mine, as it
seems that the bdb backend is problematic under MacOS and Debian. Does
anyone have a clue what is really hapenning there? Anyone else
experienced those symptoms?
For
On 4/30/05, Diego Iastrubni [EMAIL PROTECTED] wrote:
CVS on steroids atomic commits we all heard of those nice slogans..
[snip]
I have heard many disaster stories from SVN. One of them is mine, as it
seems that the bdb backend is problematic under MacOS and Debian. Does
anyone have
On Sat, Apr 30, 2005 at 10:13:16PM +0200, Tzahi Fadida wrote:
Thought about it but it can be done only for my own files I generate.
Since I use postgresql which uses regular files it cannot be done.
I have a hard time believing you can't do it for pgsql's *data* files,
which is what you care
On Sat, Apr 30, 2005 at 10:40:42PM +0200, Tzahi Fadida wrote:
Maybe there is another way.
Is there a way to also count the cache hits on blocks and not only
cache misses as I do with block_dump per process?
Not that I know, but I haven't looked into it. Adding it should be
pretty simple.
-Original Message-
From: Muli Ben-Yehuda [mailto:[EMAIL PROTECTED]
Sent: Saturday, April 30, 2005 10:15 PM
On Sat, Apr 30, 2005 at 10:13:16PM +0200, Tzahi Fadida wrote:
Thought about it but it can be done only for my own files I
generate.
Since I use postgresql which uses
I have a subversion repository around 400MB on my debian machine
(unstable) and didn't encounter any problems yet. I also have a much
smaller repository on a sarge machine - don't have problems there.
about connection way:
sid - svn://
sarge svn+ssh://
CVS on steroids atomic commits we
On Sat, Apr 30, 2005 at 11:57:45PM +0200, Tzahi Fadida wrote:
Of course, it's a directory with regular files but how can it help, it
would get
cached because they are regular files no matter what device I use.
So unmount and mount every time you want to clear the cache. Or use
any of the
-Original Message-
From: Muli Ben-Yehuda [mailto:[EMAIL PROTECTED]
Sent: Saturday, April 30, 2005 11:41 PM
To: Tzahi Fadida
Cc: linux-il@linux.org.il
Subject: Re: cleaning memory.
On Sat, Apr 30, 2005 at 11:57:45PM +0200, Tzahi Fadida wrote:
Of course, it's a directory
Subversion works pretty well here (subversion trunk, Mandriva Limited Edition
2005, Apache 2 compiled from source, etc.). What version of Debian do you
have? What version of Subversion have you installed? Have you consulted #svn
on Freenode? Or the subversion mailing lists?
Regards,
On Sunday 01 May 2005 05:16, Shlomi Fish wrote:
Subversion works pretty well here (subversion trunk, Mandriva Limited
Edition 2005, Apache 2 compiled from source, etc.). What version of Debian
do you have? What version of Subversion have you installed? Have you
consulted #svn on Freenode? Or
Gil Freund wrote:
On 4/30/05, Diego Iastrubni [EMAIL PROTECTED] wrote:
CVS on steroids atomic commits we all heard of those nice slogans..
[snip]
I have heard many disaster stories from SVN. One of them is mine, as it
seems that the bdb backend is problematic under MacOS and
34 matches
Mail list logo