Re: Arduino on Mageia linux

As I already wrote, it turned out to be a bad USB cable. I should have checked that first. My bad. On Thu, 22 Jun 2017 15:20:40 +0300 borissh1...@gmail.com wrote: > Hi , > > I had a similar issue when I checked the wrong board in the IDE (few > years ago things may have changed). > > Unplug

Re: Arduino on Mageia linux

Hi , I had a similar issue when I checked the wrong board in the IDE (few years ago things may have changed). Unplug the device , close the IDE , plug it in again and : dmesg ls /dev/serial/by-* start the IDE again and make sure you choose the correct board. On Tuesday, 20 June 2017

Re: [LibreOffice 5.3/Ubuntu 17.04] Culmus Fonts not detected

On 2017-06-22 11:53, Nadav Har'El wrote: > What does it take to "convert" a Type 1 font into OpenType or TrueType? > Is it just a trivial format conversion issue, or something more > involved? Is something lost in this conversion - precision, ability to > edit, or anything else? I just did a

Re: [LibreOffice 5.3/Ubuntu 17.04] Culmus Fonts not detected

It should be quite trivial to do the conversion with the open source package FontForge. Note that converting Type1 fonts to otf is a lossless conversion, as OpenType is a superset of Type1 and TrueType. Type1 and TrueType store the font paths differently as Type1 uses Bézier curves, wheras

Re: [LibreOffice 5.3/Ubuntu 17.04] Culmus Fonts not detected

2017-06-22 11:53 GMT+03:00 Nadav Har'El : > On Fri, Jun 02, 2017, E.S. Rosenberg wrote about "Re: [LibreOffice 5.3/Ubuntu > 17.04] Culmus Fonts not detected": >> For those of you who are interested: >> As of 5.3 LO no longer supports Type1 fonts which is how the >>

Re: [LibreOffice 5.3/Ubuntu 17.04] Culmus Fonts not detected

On Fri, Jun 02, 2017, E.S. Rosenberg wrote about "Re: [LibreOffice 5.3/Ubuntu 17.04] Culmus Fonts not detected": > For those of you who are interested: > As of 5.3 LO no longer supports Type1 fonts which is how the > culmus-fancy font set ships. > The best solution is to convert them to OpenType