Andrew Morton napsal(a):
> On Tue, 28 Aug 2007 07:33:08 +0200 Jiri Slaby <[EMAIL PROTECTED]> wrote:
>
>>> Again, ARRAY_SIZE() would be clearer here.
>> No, this is only do this 16 times, no corresponding table :).
>
> OK, poorly chosen example. But there are lots of others, like:
Yes, you
On Tue, 28 Aug 2007 07:33:08 +0200 Jiri Slaby <[EMAIL PROTECTED]> wrote:
> > Again, ARRAY_SIZE() would be clearer here.
>
> No, this is only do this 16 times, no corresponding table :).
OK, poorly chosen example. But there are lots of others, like:
+
+ for (i = 0; i < 59; i++) {
+
Andrew Morton napsal(a):
> On Sun, 26 Aug 2007 07:09:02 -0700
> Jiri Slaby <[EMAIL PROTECTED]> wrote:
> + retok = stk11xx_check_device(dev, 500);
> + if (retok != 1) {
> + dev_err(>udev->dev, "load microcode fail\n");
> + return -EIO;
Linus Torvalds wrote:
> On Tue, 28 Aug 2007, Al Boldi wrote:
> > No need for framebuffer. All you need is X using the X.org vesa-driver.
> > Then start gears like this:
> >
> > # gears & gears & gears &
> >
> > Then lay them out side by side to see the periodic stallings for ~10sec.
>
> I don't
Patrick J. LoPresti wrote:
> My system is a SunFire x4100 (x86_64) with 16G of RAM and 32G of swap
> in a single partition. I have an application which consumes a lot of
> memory, and after a few hours the oom-killer kills it.
>
> This would not be surprising, except a) the machine still has 27G
Hi,
Stefan Becker wrote:
while trying to debug a hibernation/rtc_cmos alarm wakeup problem in
2.6.22 (or later) I noticed that the latest kernel crashes (or gets
stuck sometimes) during boot after the message:
SMP alternatives: switching to UP code
Retested with 2.6.23-rc3-git10. Same
On Tue, 28 Aug 2007, Al Boldi wrote:
>
> No need for framebuffer. All you need is X using the X.org vesa-driver.
> Then start gears like this:
>
> # gears & gears & gears &
>
> Then lay them out side by side to see the periodic stallings for ~10sec.
I don't think this is a good test.
Since CONFIG_RAMFS is currently hard-selected to "y", and since
Documentation/filesystems/ramfs-rootfs-initramfs.txt reads as follows:
"The amount of code required to implement ramfs is tiny, because all
the work is done by the existing Linux caching infrastructure.
Basically, you're mounting
Michael J. Evans wrote:
On Monday 27 August 2007, Randy Dunlap wrote:
On Mon, 27 Aug 2007 15:16:21 -0700 Michael J. Evans wrote:
=
--- linux/drivers/md/md.c.orig 2007-08-21 03:19:42.511576248 -0700
+++ linux/drivers/md/md.c
On Monday 27 August 2007, Randy Dunlap wrote:
> On Mon, 27 Aug 2007 15:16:21 -0700 Michael J. Evans wrote:
>
> > =
> > --- linux/drivers/md/md.c.orig 2007-08-21 03:19:42.511576248 -0700
> > +++ linux/drivers/md/md.c 2007-08-21
From: Michael J. Evans <[EMAIL PROTECTED]>
In current release kernels the md module (Software RAID) uses a static array
(dev_t[128]) to store partition/device info temporarily for autostart.
This patch replaces that static array with a list.
Signed-off-by: Michael J. Evans <[EMAIL PROTECTED]>
Ingo Molnar wrote:
> * Al Boldi <[EMAIL PROTECTED]> wrote:
> > > Could you try the patch below instead, does this make 3x glxgears
> > > smooth again? (if yes, could you send me your Signed-off-by line as
> > > well.)
> >
> > The task-startup stalling is still there for ~10sec.
> >
> > Can you see
> But SIGNAL_STOP_DEQUEUED code should be OK, afaics. We only need it to
> make sure do_signal_stop() can't miss SIGNAL_STOP_CONTINUED/GROUP_EXIT.
>
> Can't we remove SIGNAL_STOP_DEQUEUED, btw?
No, we can't.
> dequeue_signal:
>
> if (sig_kernel_stop(sig))
>
On Mon, Aug 27, 2007 at 02:58:05PM -0700, Kok, Auke wrote:
> Adrian Bunk wrote:
>...
>> This patch has been sent on:
>> - 14 Aug 2007
>> - 29 Jul 2007
>
> currently we won't have e100 fixed up for ARM in 2.6.23, so removing this
> for 2.6.24 sounds a bit premature. Maybe 2.6.25. Can you
>
From: Adrian Bunk <[EMAIL PROTECTED]>
Subject: 2.6.23-rc3-mm1: m32r defconfig compile error
Date: Mon, 27 Aug 2007 23:27:48 +0200
> On Wed, Aug 22, 2007 at 02:06:48AM -0700, Andrew Morton wrote:
> >...
> > Changes since 2.6.23-rc2-mm2:
> >...
> > git-m32r.patch
> >...
> > git trees
> >...
>
>
Ok, I lost it, and let two weeks pass between -rc releases. My bad.
As a result, -rc4 is a bit bigger than it would/should have been, but
hopefully it's all good, and we've fixed most regressions. There's some
arch updates (MIPS, power, sparc64, s390) and an ACPI update, but the
rest of it is
Patrick J. LoPresti wrote:
I am using Linux 2.6.16.46-0.12-smp (SUSE 10 SP1 stock kernel).
I do intend to bother SUSE, but I am hoping some kind kernel savant
can help me interpret these log messages and/or give me some
suggestions for how to proceed.
My system is a SunFire x4100 (x86_64) with
On Mon, 27 Aug 2007, Darrick J. Wong wrote:
> documentation doesn't mention any naming conventions for sensors that
> measure Watts, so I am proposing that they be called "powerX_input" in a
> fashion similar to temperature/rpm/current sensors. If that is
> agreeable to everyone, I'll post a
Mathieu Desnoyers wrote:
Q:
What's the reason to have cmpxchg64_local on 32 bit architectures?
Without that need all this would just be a few simple defines.
A:
cmpxchg64_local on 32 bits architectures takes unsigned long long
parameters, but cmpxchg_local only takes longs. Since we have
Jeff Layton wrote:
On Tue, 21 Aug 2007 17:21:28 -0400
Josef Sipek <[EMAIL PROTECTED]> wrote:
On Tue, Aug 21, 2007 at 07:35:51AM -0400, Jeff Layton wrote:
On Tue, 21 Aug 2007 15:35:08 +1000
Timothy Shimmin <[EMAIL PROTECTED]> wrote:
Jeff Layton wrote:
This should fix all of the filesystems
On Mon, Aug 27, 2007 at 06:19:29PM -0700, Bret Towe wrote:
> On 8/27/07, Trond Myklebust <[EMAIL PROTECTED]> wrote:
> > > > this sounds alot like the post i did yesterday titled 'nfs4 hang
> > > > regression'
> > > > i tracked it down to commit 3d39c691ff486142dd9aaeac12f553f4476b7a6
> > >
> > >
Measurements on IA64 slub w/per cpu vs slub w/per cpu/cmpxchg_local
emulation. Results are not good:
slub/per cpu
1 times kmalloc(8)/kfree -> 105 cycles
1 times kmalloc(16)/kfree -> 104 cycles
1 times kmalloc(32)/kfree -> 105 cycles
1 times kmalloc(64)/kfree -> 104 cycles
1
On Mon, 2007-08-27 at 13:15 +, Pavel Machek wrote:
> Hi!
>
> > >> > Does this make sense?
> > >>
> > >> Yes, this is a sensible optimization. But I think it may be better to
> > >> make bootloader load kernel D directly into a specified memory location.
> > >> For example, we can add a
On 8/27/07, Trond Myklebust <[EMAIL PROTECTED]> wrote:
> On Thu, 2007-08-23 at 12:36 -0500, Florin Iucha wrote:
> > On Thu, Aug 23, 2007 at 10:14:38AM -0700, Bret Towe wrote:
> > > this sounds alot like the post i did yesterday titled 'nfs4 hang
> > > regression'
> > > i tracked it down to commit
On Thu, Aug 23, 2007 at 02:40:37PM -0500, Matt Mackall wrote:
> On Thu, Aug 23, 2007 at 11:58:31AM -0700, Paul E. McKenney wrote:
> > On Thu, Aug 23, 2007 at 01:06:58PM -0500, Matt Mackall wrote:
> > > On Fri, Aug 17, 2007 at 01:00:22PM -0700, Paul E. McKenney wrote:
> > > > On Fri, Aug 17, 2007
On Mon, 2007-08-27 at 23:31 +0200, Pavel Machek wrote:
> Hi!
>
> > This patch adds writing support for /dev/oldmem. This is used to
> > restore the memory contents of hibernated system.
> >
> > Signed-off-by: Huang Ying <[EMAIL PROTECTED]>
>
> > +ssize_t write_oldmem_page(unsigned long pfn,
On Mon, 2007-08-27 at 17:12 -0700, Andrew Morton wrote:
> Right now, pretty much every instance of NR_CPUS in the tree is a flag
> which says "old, krufty, fixme".
I thought of that when I changed them.
Perhaps the new for_each_possible_cpu code can
now be more easily inspected/transformed by
Hi Joe,
On 28/08/07, Joe Perches <[EMAIL PROTECTED]> wrote:
> Done via grep/sed and compile tested i386 with xen
>
> Changed the foo++ and ++foo forms
[snip]
> There are 3 more lines that could be modified:
>
> arch/powerpc/sysdev/mpic.c: for (i = 0; i < NR_CPUS; ++i, cpumask >>= 1)
On Mon, 27 Aug 2007 16:54:47 -0700
Joe Perches <[EMAIL PROTECTED]> wrote:
> Done via grep/sed and compile tested i386 with xen
>
> Changed the foo++ and ++foo forms
>
> $ egrep -r -l
>
On Mon, Aug 27, 2007 at 02:26:50PM +0100, Denys Vlasenko wrote:
> On Monday 27 August 2007 13:13, Fengguang Wu wrote:
> > Hi Denys,
> >
> > On Mon, Aug 27, 2007 at 12:56:31PM +0100, Denys Vlasenko wrote:
> > > Hi,
> > >
> > > I was a bit frustrated by bad quality of memory usage info
> > > from
Done via grep/sed and compile tested i386 with xen
Changed the foo++ and ++foo forms
$ egrep -r -l
"for[[:space:]]*\([[:space:]]*([A-Za-z0-9_]+)[[:space:]]*=[[:space:]]*0[[:space:]]*;[[:space:]]*\1[[:space:]]*<[[:space:]]*NR_CPUS[[:space:]]*;[[:space:]]*\1\+\+[[:space:]]*[[:space:]]*\)"
* |
On Mon, 27 Aug 2007 11:50:10 -0700 (PDT)
Christoph Lameter <[EMAIL PROTECTED]> wrote:
> On Fri, 24 Aug 2007, Andrew Morton wrote:
>
> > I'm struggling a bit to understand these numbers. Bigger is better, I
> > assume? In what units are these numbers?
>
> No less is better. These are cycle
On Tue, Aug 28, 2007 at 09:26:36AM +1000, Neil Brown wrote:
> On Monday August 27, [EMAIL PROTECTED] wrote:
> >
> > +/* Reference counting, callback cleanup, etc., all look racy as heck.
> > + * And why is cb_set an atomic? */
>
> Agreed so do we really want this code in mainline? is the
The stable util-linux-ng 2.13 release is available at:
ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng/
A few numbers:
- 8 months (grr...)
- 368 patches (wow...)
- 35 contributors (thanks...!)
Feedback and bug reports, as always, are welcomed.
Karel
Util-linux-ng
On Monday August 27, [EMAIL PROTECTED] wrote:
> * a bug (AFAICT) in md.c - we open raid components r/w and if it
> fails, it fails. Good for our purposes, but... how about raid0 on read-only
> devices? In any case, we have a ready place to store mode_t, so it's not a
> problem for getting
On Monday August 27, [EMAIL PROTECTED] wrote:
>
> +/* Reference counting, callback cleanup, etc., all look racy as heck.
> + * And why is cb_set an atomic? */
Agreed so do we really want this code in mainline? is the old
code so bad that this is better?
- cb_set should not be atomic.
-
Hi,
If one compiles the example smount program, found in
Documentation/sharedsubtree.txt, with -Wall then there's a small
compiler warning rearing its ugly head :
smount.c: In function 'main':
smount.c:45: warning: implicit declaration of function 'strcmp'
Easily fixed by just including
On Mon, Aug 27, 2007 at 03:53:02PM -0700, Arjan van de Ven wrote:
> On Mon, 27 Aug 2007 23:27:23 +0200
> Adrian Bunk <[EMAIL PROTECTED]> wrote:
>
> > On Wed, Aug 22, 2007 at 02:06:48AM -0700, Andrew Morton wrote:
> > >...
> > > Changes since 2.6.23-rc2-mm2:
> > >...
> > > git-alsa.patch
> > >...
Hi,
On Tue Aug 7 16:00:19 GMT 2007, Martin Koegler wrote:
> A vanilla 2.6.22 kernel (SMP PREEMPT i686) produced the following messages,
> while working with a CIFS mount point:
>
> Aug 7 16:12:30 localhost kernel: BUG: scheduling while atomic:
> bash/0x0001/5868
> Aug 7 16:12:30
On Mon, 2007-08-27 at 15:55 -0700, Stephane Eranian wrote:
> Yet the model name looks strange. So we need to run one more test,
> as the fam/model is not enough. What we need to check is whether or
> not this processor implements architectural perfmon or not.
>
> Could you please compile and run
On Fri, Aug 24, 2007 at 11:33:10AM +0800, Eugene Teo wrote:
> Takashi-san fixed sound/isa/wavefront/wavefront_synth.c to use
> request_firmware instead of sys_*. Since that is the last driver in the
> kernel that uses sys_{read,close}, this patch kills these exports. sys_open
> is left exported
On Mon, Aug 27, 2007 at 11:30:53AM +0100, Al Viro wrote:
> 3) ->ioctl(). What a mess...
Yup.
See also:
Subject: [PATCH] dm: support ioctls on mapped devices: fix with fake file
http://uwsg.indiana.edu/hypermail/linux/kernel/0606.2/2979.html
and related threads.
> First of all, we have 3
Daniel,
On Mon, Aug 27, 2007 at 10:55:31AM -0700, Daniel Walker wrote:
> Here is the cpuinfo for processor 0 .. It's got four cores so this isn't
> the full /proc/cpuinfo output ..
>
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 14
The looks
On Monday, August 27, 2007 4:52 PM, Yinghai Lu wrote:
> Yes, I was wondering why kernel.org mainline will have
> /dev/sdb for first raid. but it seems RHEL 5 kernel have
> first raid before second raid...( it
> after all left over raw devices..), maybe they already aplied
> some patch?
>
>
Christoph Hellwig wrote:
On Fri, Aug 24, 2007 at 11:33:10AM +0800, Eugene Teo wrote:
Takashi-san fixed sound/isa/wavefront/wavefront_synth.c to use
request_firmware instead of sys_*. Since that is the last driver in the
kernel that uses sys_{read,close}, this patch kills these exports. sys_open
On Mon, 27 Aug 2007 23:27:23 +0200
Adrian Bunk <[EMAIL PROTECTED]> wrote:
> On Wed, Aug 22, 2007 at 02:06:48AM -0700, Andrew Morton wrote:
> >...
> > Changes since 2.6.23-rc2-mm2:
> >...
> > git-alsa.patch
> >...
> > git trees
> >...
>
> sys_{open,read} can finally be unexported.
>
isn't
Moore, Eric wrote:
On Monday, August 27, 2007 11:58 AM, Yinghai Lu wrote:
[PATCH] mptsas: scan the logical volume at first
user like to see the raid show as /dev/sda before left raw disks.
So scan the volume at first to make their life easier.
Signed-off-by: Yinghai Lu <[EMAIL PROTECTED]>
El Miércoles, 22 de Agosto de 2007 16:54, Rene Herman escribió:
> José: do you have SCSI CD-ROM support compiled in? What are the ATA/SCSI
> related messages in the output of "dmesg" when you compile with the
> CONFIG_ATA_PIIX driver, SCSI disk and SCSI CD-ROM support (and nothing from
> the old
This is already fixed in the most recent ACPI CPUIDLE tree.
Thanks,
Adam
On Mon, 2007-08-27 at 23:27 +0200, Adrian Bunk wrote:
> On Wed, Aug 22, 2007 at 02:06:48AM -0700, Andrew Morton wrote:
> >...
> > Changes since 2.6.23-rc2-mm2:
> >...
> > git-acpi.patch
> >...
> > git trees
> >...
>
>
On Sun, 26 Aug 2007 07:09:02 -0700
Jiri Slaby <[EMAIL PROTECTED]> wrote:
> Hi,
>
> is it possible to have this driver in the -mm tree for testing purposes until
> v4l library will be developped and image resize with bayer->rgb conversion
> will be moved there? (Then, I'll push it through v4l
On 8/28/07, Adrian Bunk <[EMAIL PROTECTED]> wrote:
> On Wed, Aug 22, 2007 at 02:06:48AM -0700, Andrew Morton wrote:
> >...
> > Changes since 2.6.23-rc2-mm2:
> >...
> > git-wireless.patch
> >...
> > git trees
> >...
>
> This patch fixes two obvious bugs.
>
> Signed-off-by: Adrian Bunk <[EMAIL
On Mon, 27 Aug 2007 15:16:21 -0700 Michael J. Evans wrote:
> Note: between 2.6.22 and 2.6.23-rc3-git5
> rdev = md_import_device(dev,0, 0);
> became
> rdev = md_import_device(dev,0, 90);
> So the patch has been edited to patch around that line. (might be fuzzy)
so
On Mon, 27 Aug 2007, Mathieu Desnoyers wrote:
> Hrm, I just want to certify one thing: A lot of code paths seems to go
> to the slow path without requiring cmpxchg_local to execute at all. So
> is the slow path more likely to be triggered by the (!object),
> (!node_match) tests or by these same
* Christoph Lameter ([EMAIL PROTECTED]) wrote:
> On Mon, 27 Aug 2007, Mathieu Desnoyers wrote:
>
> > > The slow path would require disable preemption and two interrupt disables.
> > If the slow path have to call new_slab, then yes. But it seems that not
> > every slow path must call it, so for
On Monday, August 27, 2007 11:58 AM, Yinghai Lu wrote:
>
> [PATCH] mptsas: scan the logical volume at first
>
> user like to see the raid show as /dev/sda before left raw disks.
> So scan the volume at first to make their life easier.
>
> Signed-off-by: Yinghai Lu <[EMAIL PROTECTED]>
>
On Mon, Aug 27, 2007 at 04:05:48PM -0600, Grant Grundler wrote:
> .
> After reading the thread, my take is we need a more elegant way for a
> device driver to handle registration of DMA regions allocated by user
> space. The API would "make this page/region act like dma_alloc_coherent()".
>
From: Michael J. Evans <[EMAIL PROTECTED]>
In current release kernels the md module (Software RAID) uses a static array
(dev_t[128]) to store partition/device info temporarily for autostart.
This patch replaces that static array with a list.
Signed-off-by: Michael J. Evans <[EMAIL PROTECTED]>
H. One wild idea would be to use a priority futex for the slab lock?
That would make the slow paths interrupt safe without requiring interrupt
disable? Does a futex fit into the page struct?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message
On Mon, 27 Aug 2007, Mathieu Desnoyers wrote:
> > The slow path would require disable preemption and two interrupt disables.
> If the slow path have to call new_slab, then yes. But it seems that not
> every slow path must call it, so for the other slow paths, only one
> interrupt disable would be
Hi Andrew,
I thought you were going to use Kay Sievers's patch, which adds error
value checking to much of the add_event_var callers, so I did not bother
sending the updated version of my patch. Here it is, with the changelog.
---
Fix kobject uevent string handling errors
- increment
Jan Engelhardt pravi:
> On Aug 24 2007 07:34, linux-os (Dick Johnson) wrote:
>>> I'm new to kernel development and have some questions.
>>>
>>> 1. Why can't I divide with regular casting to double ((double)a /
>>> (double)b)? It gives me strange errors when compiling:
>>>
>>> WARNING: "__divdf3"
> OK, so here's the new patch, inline this time:
thanks. looks fine now. forwarding to Dmitry for mainline inclusion...
rgds
-daniel
-
[PATCH] IdealTEK URTC1000 support for usbtouchscreen
This patch adds support for IdealTEK URTC1000 touchscreen controllers.
Documentation can
On Fri, Aug 24, 2007 at 11:02:32AM -0700, [EMAIL PROTECTED] wrote:
>
> On Altix, DMA may be reordered within the NUMA interconnect.
> This can be a problem with Infiniband, where DMA to Completion
> Queues can race with data DMA. This patchset allows a driver
> to associate a memory region
* Casey Schaufler <[EMAIL PROTECTED]> [2007-08-27 22:51]:
>
> Smack is the Simplified Mandatory Access Control Kernel.
>
> Smack implements mandatory access control (MAC) using labels
> attached to tasks and data containers, including files, SVIPC,
> and other tasks. Smack is a kernel based
On Monday, August 27, 2007 9:59 AM, Joe Perches wrote:
> On Mon, 2007-08-27 at 09:30 -0600, Moore, Eric wrote:
> > Yes it was changed to [EMAIL PROTECTED] I had posted a
> > patch about a month back, along with the changes for all the driver
> > sources.
>
> This is what I have:
>
>
Adrian Bunk wrote:
This patch contains the planned removal of the eepro100 driver.
Signed-off-by: Adrian Bunk
you lost your e-mail address? :)
---
This patch has been sent on:
- 14 Aug 2007
- 29 Jul 2007
currently we won't have e100 fixed up for ARM in 2.6.23, so removing this for
On Mon 2007-08-27 23:59:31, Rafael J. Wysocki wrote:
> On Monday, 27 August 2007 23:32, Pavel Machek wrote:
> > On Mon 2007-08-27 22:36:57, Jeff Chua wrote:
> > > On 8/27/07, Pavel Machek <[EMAIL PROTECTED]> wrote:
> > > > On Mon 2007-08-27 12:43:50, Pavel Machek wrote:
> > > > > Hi!
> > > > >
> >
Say Evgeniy, something I was curious about but forgot to ask you
earlier...
On Wednesday 08 August 2007 03:17, Evgeniy Polyakov wrote:
> ...All oerations are not atomic, since we do not care about precise
> number of bios, but a fact, that we are close or close enough to the
> limit.
> ... in
Current idle time in kstat is based on jiffies and is coarse grained.
tick_sched.idle_sleeptime is making some attempt to keep track of
idle time in a fine grained manner. But, it is not handling
the time spent in interrupts fully.
Make tick_sched.idle_sleeptime accurate with respect to time
From: James Chapman <[EMAIL PROTECTED]>
Date: Mon, 27 Aug 2007 22:41:43 +0100
> I don't recall saying anything in previous posts about this. Are you
> confusing my posts with Jan-Bernd's?
Yes, my bad.
> Jan-Bernd has been talking about using hrtimers to _reschedule_
> NAPI. My posts are
From: Rafael J. Wysocki <[EMAIL PROTECTED]>
According to the ACPI specification (eg. ACPI 2.0c, sec. 7.3.1, 7.3.3,
ACPI 3.0b, sec. 7.3.1, 7.3.3) the _GTS and _BFS global control methods should
be executed, respectively, right before entering a sleep state (S1-S4) and right
after leaving it, but
On Monday, 27 August 2007 23:32, Pavel Machek wrote:
> On Mon 2007-08-27 22:36:57, Jeff Chua wrote:
> > On 8/27/07, Pavel Machek <[EMAIL PROTECTED]> wrote:
> > > On Mon 2007-08-27 12:43:50, Pavel Machek wrote:
> > > > Hi!
> > > >
> > > > Trying to do few onlines/offlines reliably hangs my machine
From: Rafael J. Wysocki <[EMAIL PROTECTED]>
Introduce a separate ACPI function for setting the system status indicator and
use it in the right places in the suspend and hibernation related ACPI callbacks
instead of setting the system status indicator implicitly in
acpi_enter_sleep_state_prep()
From: Rafael J. Wysocki <[EMAIL PROTECTED]>
Make hibernation_platform_enter() execute the enter-a-sleep-state sequence
instead of the mixed shutdown-with-entering-S4 thing.
Replace the shutting down of devices done by kernel_shutdown_prepare(), before
entering the ACPI S4 sleep state, with
On Sat, Aug 25, 2007 at 04:09:27PM +0100, Dr. David Alan Gilbert wrote:
> This patch adds the address of the client that caused an
> error in sunrpc/svc.c so that you get errors that look like:
>
> svc: 192.168.66.28, port=709: unknown version (3 for prog 13, nfsd)
>
> I've seen machines
Hi,
The patches in this series are intended to improve the handling of the ACPI
platform during suspend and hibernation.
They do the following things:
* make hibernation_platform_enter() consistent with the sleep state entering
code in kernel/power/main.c
* introduce global platform callbacks
It worked.
Thanks a lot.
Thiago
On 8/26/07, Kay Sievers <[EMAIL PROTECTED]> wrote:
> On 8/27/07, Thiago Ramos dos Santos <[EMAIL PROTECTED]> wrote:
> > I have 2 devices which use the usbserial module: a CDMA modem and a
> > Palm PDA (to be more especific, the PDA uses the visor module, which
> >
David Miller wrote:
From: James Chapman <[EMAIL PROTECTED]>
Date: Mon, 27 Aug 2007 16:51:29 +0100
To implement this, there's no need for timers, hrtimers or generic NAPI
support that others have suggested. A driver's poll() would set an
internal flag and record the current jiffies value when
On 8/27/07, Adrian Bunk <[EMAIL PROTECTED]> wrote:
> On Mon, Aug 27, 2007 at 05:34:21PM -0400, Mike Frysinger wrote:
> > On 8/27/07, Adrian Bunk <[EMAIL PROTECTED]> wrote:
> > > This patch makes the 64bit integers on 32bit architectures usable for
> > > all C parsers that know about "long long".
>
On Fri, Aug 24, 2007 at 11:33:10AM +0800, Eugene Teo wrote:
> Takashi-san fixed sound/isa/wavefront/wavefront_synth.c to use
> request_firmware instead of sys_*. Since that is the last driver in the
> kernel that uses sys_{read,close}, this patch kills these exports. sys_open
> is left exported
* Christoph Lameter ([EMAIL PROTECTED]) wrote:
> On Mon, 27 Aug 2007, Mathieu Desnoyers wrote:
>
> > > a clean solution source code wise. It also minimizes the interrupt
> > > holdoff
> > > for the non-cmpxchg_local arches. However, it means that we will have to
> > > disable interrupts twice
On Mon, 2007-08-27 at 17:34 -0300, Luiz Fernando N. Capitulino wrote:
> Em Fri, 24 Aug 2007 11:17:34 -0700
> john stultz <[EMAIL PROTECTED]> escreveu:
>
> | On Fri, 2007-08-24 at 08:46 -0400, Bob Picco wrote:
> | > john stultz wrote:[Thu Aug 23 2007, 05:41:45PM EDT]
> | > > On Thu,
> Add drm_zalloc().
Ugh. Too fast. Ofcourse this is the correct version. Sorry.
Signed-off-by: Mariusz Kozlowski <[EMAIL PROTECTED]>
--- linux-2.6.23-rc3-mm1-a/drivers/char/drm/drmP.h 2007-08-27
18:32:26.0 +0200
+++ linux-2.6.23-rc3-mm1-b/drivers/char/drm/drmP.h 2007-08-26
On Mon, Aug 27, 2007 at 05:34:21PM -0400, Mike Frysinger wrote:
> On 8/27/07, Adrian Bunk <[EMAIL PROTECTED]> wrote:
> > This patch makes the 64bit integers on 32bit architectures usable for
> > all C parsers that know about "long long".
>
> ah, yet another attempt at this stuff
>
> you probably
On Mon, Aug 27, 2007 at 01:40:31PM -0700, Joe Perches wrote:
> Add const to some struct task_struct * uses
Why, oh, why? This way code there are more characters on screen and zero
change in vmlinux, at least here.
> --- a/include/linux/sched.h
> +++ b/include/linux/sched.h
> @@ -1222,22 +1222,22
On Mon 2007-08-27 23:33:43, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <[EMAIL PROTECTED]>
>
> Add the bits needed for supporting arbitrary boot kernels to the common
> hibernation code.
>
> To support arbitrary boot kernels, make it possible to replace the 'struct
> new_utsname' and the
On 8/27/07, Adrian Bunk <[EMAIL PROTECTED]> wrote:
> This patch makes the 64bit integers on 32bit architectures usable for
> all C parsers that know about "long long".
ah, yet another attempt at this stuff
you probably need to update linux/types.h as well
-mike
-
To unsubscribe from this list:
From: Rafael J. Wysocki <[EMAIL PROTECTED]>
Add the bits needed for supporting arbitrary boot kernels to the common
hibernation code.
To support arbitrary boot kernels, make it possible to replace the 'struct
new_utsname' and the kernel version in the hibernation image header by some
On Mon 2007-08-27 22:36:57, Jeff Chua wrote:
> On 8/27/07, Pavel Machek <[EMAIL PROTECTED]> wrote:
> > On Mon 2007-08-27 12:43:50, Pavel Machek wrote:
> > > Hi!
> > >
> > > Trying to do few onlines/offlines reliably hangs my machine (thinkpad
> > > x60, i386 architecture).
>
> I just 3 cycles of
From: Rafael J. Wysocki <[EMAIL PROTECTED]>
Use temporary page tables for the kernel text mapping during hibernation restore
on x86_64.
Without the patch, the original boot kernel's page tables that represent the
kernel text mapping are used while the core of the image kernel is being
restored.
From: Rafael J. Wysocki <[EMAIL PROTECTED]>
Since we already pass the address of restore_registers() in the image header,
we can also pass the value of the CR3 register from before the hibernation in
the same way. This will allow us to avoid using init_level4_pgt page tables
during the restore.
Hi,
The first two patches in this series make it possible to restore the memory
state from a hibernation image with the help of a kernel different from the
image one.
The first patch adds the generic, platform independent code needed for that.
The second patch implements the idea on x86_64.
The
From: Rafael J. Wysocki <[EMAIL PROTECTED]>
Make it possible to restore a hibernation image on x86_64 with the help of a
kernel different from the one in the image.
The idea is to split the core restoration code into two separate parts and to
place each of them in a different page. The first
The Coverity checker spotted that we have already oops'ed if "cmd"
was NULL.
Since "cmd" being NULL doesn't seem to be possible at this point this
patch removes the NULL check.
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
---
This patch has been sent on:
- 31 Jul 2007
---
Hi!
> This patch adds writing support for /dev/oldmem. This is used to
> restore the memory contents of hibernated system.
>
> Signed-off-by: Huang Ying <[EMAIL PROTECTED]>
> +ssize_t write_oldmem_page(unsigned long pfn, const char *buf,
> + size_t csize, unsigned long
The Coverity checker spotted that we have already oops'ed if "disk"
was NULL.
Since "disk" being NULL seems impossible at this point this patch
removes the NULL check.
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
Acked-by: Mike Miller <[EMAIL PROTECTED]>
---
This patch has been sent on:
-
On Wed, Aug 22, 2007 at 02:06:48AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.23-rc2-mm2:
>...
> +x86_64-mm-unwinder.patch
>...
> +x86_64-mm-remove-maccumulate-outgoing-args.patch
>...
> x86 tree updates
>...
-maccumulate-outgoing-args on i386 count:
1 + 1 - 1 = 1
If the stack
On Wed, Aug 22, 2007 at 02:06:48AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.23-rc2-mm2:
>...
> git-dvb.patch
>...
> git trees
>...
This patch fixes an obvious bug in ivtvfb_release_buffers().
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
---
On Wed, Aug 22, 2007 at 02:06:48AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.23-rc2-mm2:
>...
> git-wireless.patch
>...
> git trees
>...
This patch fixes two obvious bugs.
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
---
drivers/net/wireless/iwl-base.c |4 ++--
1 file
This patch fixes the code in vortex_wt_SetFrequency() to what seems to
have been intended.
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
---
71ccb57f36553decc9cae117f3ff6dff1658c91f
diff --git a/sound/pci/au88x0/au88x0_synth.c b/sound/pci/au88x0/au88x0_synth.c
index d3e662a..978b856 100644
1 - 100 of 911 matches
Mail list logo