On Sat, Oct 10, 2020 at 9:20 AM Jacob Keller wrote:
>
> namespace.pl is intended to help locate symbols which are defined but
> are not used externally. The goal is to avoid bloat of the namespace in
> the resulting kernel image.
>
> The script relies on object data, and only finds unused symbols
On Thu, Sep 17, 2020 at 3:00 AM Johannes Berg wrote:
>
> On Wed, 2020-08-19 at 14:10 -0700, Brendan Higgins wrote:
> > On Wed, Jul 29, 2020 at 10:58 AM Vitor Massaru Iha
> > wrote:
> > > This adds the conversion of the runtime tests of test_bitfield,
> > > from `lib/test_bitfield.c` to KUnit
This change will add support to read QPIC version.
QPIC version V2.0 onwards some new register introduced
in QPIC. So based on hw_version we will update those
register.
Signed-off-by: Md Sadre Alam
---
drivers/mtd/nand/raw/qcom_nandc.c | 22 ++
1 file changed, 22
On Sat, Oct 10, 2020 at 6:05 AM Axel Rasmussen wrote:
>
> The goal of these tracepoints is to be able to debug lock contention
> issues. This lock is acquired on most (all?) mmap / munmap / page fault
> operations, so a multi-threaded process which does a lot of these can
> experience significant
This change will add support for serial training for
QSPI nand in QPIC.
Due to different PNR and PCB delays, serial read data
can come with different delays to QPIC. At high frequency
operations Rx clock should be adjusted according to delays
so that Rx Data can be captured
This change will enable support for erase , read & write support for
QSPI serial nand. In QPIC V2.0 onwards, to read last code word new
regiater is introduced. So to read for first three code word we have to
use LOCATION_n register and for last code word we ahve to use LAST_CW_n.
Signed-off-by:
This change will add initial support for qspi (serial nand).
QPIC Version v.2.0 onwards supports serial nand as well so this
change will initialize all required register to enable qspi (serial
nand).
This change is supporting very basic functionality of qspi nand flash.
1. Reset device (Reset
QPIC 2.0 supports Serial NAND support in addition to all features and
commands in QPIC 1.0 for parallel NAND. Parallel and Serial NAND cannot
operate simultaneously. QSPI nand devices will connect to QPIC IO_MACRO
block of QPIC controller. There is a separate IO_MACRO clock for IO_MACRO
block.
Qualcom IPQ5018 SoC uses QPIC NAND controller version 2.1.1
which uses BAM DMA Engine and QSPI serial nand interface.
Signed-off-by: Md Sadre Alam
---
Documentation/devicetree/bindings/mtd/qcom_nandc.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git
Dear Friend,
I am Mr. Dawuda Usman working with the department of Audit and
accounting manager here in the Bank,
There is this fund that was kept in my custody years ago,please I need
your assistance for the transferring of this fund to your bank account
for both of us benefit for life time
defconfig
mips allyesconfig
mips allmodconfig
powerpc allyesconfig
powerpc allmodconfig
powerpc allnoconfig
i386 randconfig-a006-20201009
-20201009
i386 randconfig-a005-20201009
i386 randconfig-a001-20201009
i386 randconfig-a004-20201009
i386 randconfig-a002-20201009
i386 randconfig-a003-20201009
x86_64 randconfig-a012-20201009
x86_64
On 10/9/20 7:57 PM, Paul E. McKenney wrote:
> On Fri, Oct 09, 2020 at 05:24:37PM -0700, Tom Rix wrote:
>> On 10/9/20 4:50 PM, Paul E. McKenney wrote:
>>> On Fri, Oct 09, 2020 at 02:18:41PM -0700, Tom Rix wrote:
On 10/9/20 1:18 PM, Paul E. McKenney wrote:
> On Fri, Oct 09, 2020 at
[ 47.844511] ==
[ 47.844511] WARNING: possible circular locking dependency detected
[ 47.844512] 5.9.0.gc85fb28-rt14-rt #1 Tainted: GE
[ 47.844513] --
[ 47.844514]
> 3. Find a way to allow setgroups() in a user namespace while keeping
>in mind the case of groups used for negative access control.
>This was suggested by Josh Triplett and Geoffrey Thomas. Their idea was to
>investigate adding a prctl() to allow setgroups() to be called in a user
>
On 10/9/20 8:19 PM, Rong Chen wrote:
>
>
> On 10/8/20 3:15 PM, Pavel Machek wrote:
>> Hi!
>>
>>> tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
>>> master
>>> head: c85fb28b6f999db9928b841f63f1beeb3074eeca
>>> commit: 92a81562e695628086acb92f95090ab09d9b9ec0 leds:
ira.we...@intel.com writes:
> From: Ira Weiny
>
> This kmap() call is localized to a single thread. To avoid the over
> head of global PKRS updates use the new kmap_thread() call.
Acked-by: "Eric W. Biederman"
>
> Cc: Eric Biederman
> Signed-off-by: Ira Weiny
> ---
> kernel/kexec_core.c |
In function dpu_core_irq_enable & dpu_core_irq_disable, when
some index enable or disable failed, return value will be
covered by next success index. Upper call function will not
catch this error, this maybe does not meet the expectation.
This change is to make the code a bit more readable.
Hi Vladimir,
>
> I asked this on the Microchip Support portal:
>
> -[cut here]-
>
> VLAN filtering only on specific TPID
>
>
> I would like to configure a port with the following behavior:
> - The
On 10/5/20 6:15 PM, Ricardo Neri wrote:
> On Fri, Oct 02, 2020 at 08:27:41PM -0700, Randy Dunlap wrote:
>> On 10/2/20 6:17 PM, Ricardo Neri wrote:
>>> +/**
>>> + * arch_get_cpu_type() - Get the CPU type number
>>> + * @cpu: Index of the CPU of which the index is needed
>>> + *
>>> + * Get the
On Fri, Oct 9, 2020 at 5:35 PM Willem de Bruijn
wrote:
>
> On Fri, Oct 9, 2020 at 6:32 AM Christian Eggers wrote:
> >
> > SOCK_TSTAMP_NEW (timespec64 instead of timespec) is also used for
> > hardware time stamps (configured via SO_TIMESTAMPING_NEW).
> >
> > User space (ptp4l) first configures
On 2020/9/22 上午10:58, Jie Deng wrote:
Add an I2C bus driver for virtio para-virtualization.
The controller can be emulated by the backend driver in
any device model software by following the virtio protocol.
This driver communicates with the backend driver through a
virtio I2C message
On 10/8/20 3:15 PM, Pavel Machek wrote:
Hi!
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
master
head: c85fb28b6f999db9928b841f63f1beeb3074eeca
commit: 92a81562e695628086acb92f95090ab09d9b9ec0 leds: lp55xx: Add multicolor
framework support to lp55xx
date:
On Fri, Oct 9, 2020 at 5:43 PM Willem de Bruijn wrote:
>
> On Fri, Oct 9, 2020 at 8:30 PM Deepa Dinamani wrote:
> >
> > On Fri, Oct 9, 2020 at 3:32 AM Christian Eggers wrote:
> > >
> > > The comparison of optname with SO_TIMESTAMPING_NEW is wrong way around,
> > > so SOCK_TSTAMP_NEW will first
There have been elusive reports of filemap_fault() hitting its
VM_BUG_ON_PAGE(page_to_pgoff(page) != offset, page) on kernels built
with CONFIG_READ_ONLY_THP_FOR_FS=y.
Suren has hit it on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y and
CONFIG_NUMA is not set: and he has analyzed it down to how
On 2020/10/3 下午6:02, Greg Kurz wrote:
When the IOTLB device is enabled, the log_guest_addr that is passed by
userspace to the VHOST_SET_VRING_ADDR ioctl, and which is then written
to vq->log_addr, is a GIOVA. All writes to this address are translated
by log_user() to writes to an HVA, and then
On Fri, Oct 9, 2020 at 8:25 AM Victor Erminpour
wrote:
>
> Add a switch to merge_config.sh to specify the ARCH variable
> which defines the target architecture.
>
> Set x86 as the default architecture.
>
> Signed-off-by: Victor Erminpour
> ---
You can do
ARCH=arm
On Fri, Oct 09, 2020 at 05:24:37PM -0700, Tom Rix wrote:
>
> On 10/9/20 4:50 PM, Paul E. McKenney wrote:
> > On Fri, Oct 09, 2020 at 02:18:41PM -0700, Tom Rix wrote:
> >> On 10/9/20 1:18 PM, Paul E. McKenney wrote:
> >>> On Fri, Oct 09, 2020 at 12:47:36PM -0700, t...@redhat.com wrote:
>
On 10/9/20 12:50 PM, ira.we...@intel.com wrote:
From: Ira Weiny
The pmem driver uses a cached virtual address to access its memory
directly. Because the nvdimm driver is well aware of the special
protections it has mapped memory with, we call dev_access_[en|dis]able()
around the direct
On Fri, 2020-10-09 at 14:34 -0700, Eric Biggers wrote:
> On Fri, Oct 09, 2020 at 12:49:57PM -0700, ira.we...@intel.com wrote:
> > From: Ira Weiny
> >
> > The kmap() calls in this FS are localized to a single thread. To
> > avoid the over head of global PKRS updates use the new
> > kmap_thread()
On 2020/10/3 下午6:02, Greg Kurz wrote:
The open-coded computation of the used size doesn't take the event
into account when the VIRTIO_RING_F_EVENT_IDX feature is present.
Fix that by using vhost_get_used_size().
Signed-off-by: Greg Kurz
---
drivers/vhost/vhost.c |3 +--
1 file
On 2020/10/3 下午1:02, Si-Wei Liu wrote:
Pinned pages are not properly accounted particularly when
mapping error occurs on IOTLB update. Clean up dangling
pinned pages for the error path. As the inflight pinned
pages, specifically for memory region that strides across
multiple chunks, would need
On 2020/10/10 03:50, ira.we...@intel.com wrote:
> From: Ira Weiny
>
> These kmap() calls are localized to a single thread. To avoid the over
> head of global PKRS updates use the new kmap_thread() call.
>
Hi Ira,
There were a number of options considered.
1) Attempt to change all the thread
Hi Arnd,
On Fri, 9 Oct 2020 16:01:22 +0200 Arnd Bergmann wrote:
>
> On Wed, Sep 9, 2020 at 1:27 PM Arnd Bergmann wrote:
> >
> > On Wed, 2 Sep 2020 00:15:16 +1000, Nicholas Piggin wrote:
> > > It would be nice to be able to modify mmu_context functions or add a
> > > hook without updating all
Fix follow warning:
[crypto/testmgr.c:2317]: (warning) %d in format string (no. 5) requires
'int' but the argument type is 'unsigned int'.
Reported-by: Hulk Robot
Signed-off-by: Ye Bin
---
crypto/testmgr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/crypto/testmgr.c
On 2020/10/10 07:00, Rasmus Villemoes wrote:
> On 09/10/2020 20.34, Alex Dewar wrote:
>> The variable async_registration is used to indicate whether or not
>> CONFIG_BCACHE_ASYNC_REGISTRATION is enabled, triggering a (false)
>> warning in Coverity about unreachable code. However, it seems clearer
Hi Rob,
On Tuesday, September 29, 2020 4:23 PM, Ran Wang wrote:
>
> From: Biwen Li
>
> The 'fsl,ippdexpcr1-alt-reg' property is used to handle an errata A-008646 on
> LS1021A.
>
> Signed-off-by: Biwen Li
> Signed-off-by: Ran Wang
> ---
> Change in v3:
> - Simplize related proterty
Functions (disable_all_writeback_pipes_for_stream &
dc_enable_stereo & dc_post_update_surfaces_to_stream)
always return true, there is no need to keep the return value.
This change is to make the code a bit more readable.
Signed-off-by: Bernard Zhao
---
drivers/gpu/drm/amd/display/dc/core/dc.c
Hi Sumit,
On Fri, Sep 11, 2020 at 06:58:40PM +0530, Sumit Garg wrote:
> Introduce framework to turn an IPI as NMI using pseudo NMIs. In case a
> particular platform doesn't support pseudo NMIs, then request IPI as a
> regular IRQ.
>
> The main motivation for this feature is to have an IPI that
Michal Hocko wrote:
> On Fri 09-10-20 09:51:04, Miaohe Lin wrote:
>> The mz->usage_in_excess >= mz_node->usage_in_excess check is exactly
>> the else case of mz->usage_in_excess < mz_node->usage_in_excess. So we
>> could replace else if (mz->usage_in_excess >=
>> mz_node->usage_in_excess) with
On Fri, Oct 09, 2020 at 06:29:13PM -0700, Linus Torvalds wrote:
> On Fri, Oct 9, 2020 at 6:19 PM Eric Biggers wrote:
> >
> > Okay, that makes more sense. So the patchset from Matthew
> > https://lkml.kernel.org/linux-fsdevel/20201003025534.21045-1-wi...@infradead.org/T/#u
> > isn't what you had
David Hildenbrand wrote:
> On 09.10.20 15:59, Miaohe Lin wrote:
>> They are unused anymore.
>
>-EINVAL, sentence does not make sense :)
>
>"They are not used anymore."
>"They are unused ."
My poor English. ;) Will change it in v2 soon. Many Thanks.
>
>Reviewed-by: David Hildenbrand
>
Jason Gunthorpe wrote:
> On Fri, Oct 09, 2020 at 03:04:20PM -0700, Andrew Morton wrote:
>> On Fri, 9 Oct 2020 17:03:37 +0200 "Christian König"
>> wrote:
>>
>> > Patch "495c10cc1c0c CHROMIUM: dma-buf: restore args..."
>> > adds a workaround for a bug in mmap_region.
>> >
>> > As the comment
On Fri, 9 Oct 2020 14:35:27 + Henrik Bjoernlund wrote:
> +static inline struct mac_addr nla_get_mac(const struct nlattr *nla)
static inlines are generally not needed in C sources and just hide
unused code. Please drop the inline annotation.
> +{
> + struct mac_addr mac;
> +
> +
On 2020/10/3 下午1:02, Si-Wei Liu wrote:
vhost_vdpa_map() should remove the iotlb entry just added
if the corresponding mapping fails to set up properly.
Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Si-Wei Liu
---
drivers/vhost/vdpa.c | 3 +++
1 file changed, 3
On Sat, Oct 10, 2020 at 01:39:54AM +0100, Matthew Wilcox wrote:
> On Fri, Oct 09, 2020 at 02:34:34PM -0700, Eric Biggers wrote:
> > On Fri, Oct 09, 2020 at 12:49:57PM -0700, ira.we...@intel.com wrote:
> > > The kmap() calls in this FS are localized to a single thread. To avoid
> > > the over head
On Fri, Oct 9, 2020 at 6:19 PM Eric Biggers wrote:
>
> Okay, that makes more sense. So the patchset from Matthew
> https://lkml.kernel.org/linux-fsdevel/20201003025534.21045-1-wi...@infradead.org/T/#u
> isn't what you had in mind.
No.
That first patch makes sense - it's just the "ppos can be
Hello,
syzbot has tested the proposed patch and the reproducer did not trigger any
issue:
Reported-and-tested-by: syzbot+f5378bcf0f0cab45c...@syzkaller.appspotmail.com
Tested on:
commit: 549738f1 Linux 5.9-rc8
git tree:
Hi Vikash,
On 10/7/20 10:53 PM, vgaro...@codeaurora.org wrote:
> Hi Stan,
>
> On 2020-09-28 22:14, Stanimir Varbanov wrote:
>> This makes the decoder to behaives equally for sufficient and
> behaves
>
>> insufficient events. After this change the LAST buffer flag will be set
>> when the new
On Fri, Oct 09, 2020 at 06:03:31PM -0700, Linus Torvalds wrote:
> On Fri, Oct 9, 2020 at 3:06 PM Eric Biggers wrote:
> >
> > It's a bit unintuitive that ppos=NULL means "use pos 0", not "use
> > file->f_pos".
>
> That's not at all what it means.
>
> A NULL ppos means "this has no position at
On Fri, Oct 09, 2020 at 02:55:08PM -0700, syzbot wrote:
> Hello,
>
> syzbot tried to test the proposed patch but the build/boot failed:
>
> drivers/net/wireless/ath/ath9k/hif_usb.c:1319:7: error: implicit declaration
> of function 'usb_find_bulk_in'; did you mean 'usb_fill_bulk_urb'?
>
Hello Friend.I am Mrs.CHANTAL I am sending this brief
letter to solicit your partnership to transfer $7.2 Million US
Dollars.I shall send you more information and procedures when I receive
positive response From you. Please send me a message in My private
email address is (
The pull request you sent on Sat, 10 Oct 2020 00:44:23 +0100:
> https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
> tags/spi-fix-v5.9-rc8
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/6f2f486d57c4d562cdf4932320b66fbb878ab1c4
Thank you!
--
On Fri, Oct 9, 2020 at 8:30 PM Deepa Dinamani wrote:
>
> On Fri, Oct 9, 2020 at 3:32 AM Christian Eggers wrote:
> >
> > The comparison of optname with SO_TIMESTAMPING_NEW is wrong way around,
> > so SOCK_TSTAMP_NEW will first be set and than reset again. Additionally
> > move it out of the test
On Fri, Oct 09, 2020 at 05:56:09PM -0700, syzbot wrote:
> Hello,
>
> syzbot tried to test the proposed patch but the build/boot failed:
Oops. One more try, with the typos fixed.
#syz test: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
v5.9-rc8
Index:
On Fri, 9 Oct 2020 17:18:44 -0700 Jacob Keller wrote:
> namespace.pl is intended to help locate symbols which are defined but
> are not used externally. The goal is to avoid bloat of the namespace in
> the resulting kernel image.
>
> The script relies on object data, and only finds unused
gf_early_console_putchar() uses __raw_writel() but the standard driver
uses writel()/readl(). This means we can't use both on the same machine
as the device is either big-endian, little-endian or native-endian.
As android implementation defines the endianness of the device is the one
of the
On Fri, Oct 9, 2020 at 3:06 PM Eric Biggers wrote:
>
> It's a bit unintuitive that ppos=NULL means "use pos 0", not "use
> file->f_pos".
That's not at all what it means.
A NULL ppos means "this has no position at all", and is what we use
for FMODE_STREAM file descriptors (ie sockets, pipes,
Quoting Douglas Anderson (2020-10-08 15:52:33)
> On geni-i2c transfers using DMA, it was seen that if you program the
> command (I2C_READ) before calling geni_se_rx_dma_prep() that it could
> cause interrupts to fire. If we get unlucky, these interrupts can
> just keep firing (and not be handled)
On Fri, Oct 09, 2020 at 02:34:34PM -0700, Eric Biggers wrote:
> On Fri, Oct 09, 2020 at 12:49:57PM -0700, ira.we...@intel.com wrote:
> > The kmap() calls in this FS are localized to a single thread. To avoid
> > the over head of global PKRS updates use the new kmap_thread() call.
> >
> > @@
Quoting Douglas Anderson (2020-10-08 15:52:34)
> This reverts commit 02b9aec59243c6240fc42884acc958602146ddf6.
>
> As talked about in the patch ("soc: qcom: geni: More properly switch
> to DMA mode"), swapping the order of geni_se_setup_m_cmd() and
> geni_se_xx_dma_prep() can sometimes cause
Hello,
syzbot tried to test the proposed patch but the build/boot failed:
drivers/net/wireless/ath/ath9k/hif_usb.c:1319:7: error: implicit declaration of
function 'usb_find_bulk_in'; did you mean 'usb_fill_bulk_urb'?
[-Werror=implicit-function-declaration]
Quoting Douglas Anderson (2020-10-08 15:52:35)
> diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
> index 751a49f6534f..746854745b15 100644
> --- a/drivers/soc/qcom/qcom-geni-se.c
> +++ b/drivers/soc/qcom/qcom-geni-se.c
> @@ -266,49 +266,53 @@
On Fri, Oct 9, 2020 at 6:32 AM Christian Eggers wrote:
>
> SOCK_TSTAMP_NEW (timespec64 instead of timespec) is also used for
> hardware time stamps (configured via SO_TIMESTAMPING_NEW).
>
> User space (ptp4l) first configures hardware time stamping via
> SO_TIMESTAMPING_NEW which sets
Hello, I am Barrister Chris Tetteh Attorney to the late Engr. Steve Moore who
died with his wife and their three kids in a car accident. Before his death he
had funds valued at twenty seven Million dollars deposited in a bank. I need
your assistance to retrieve the money left behind by my
On Thu, 8 Oct 2020, Thomas Bogendoerfer wrote:
> + /*
> + * MAC2008 toolchain never landed in real world, so
> we're only
> + * testing whether it can be disabled and don't try to
> enabled
> + * it.
> +
On Fri, Oct 9, 2020 at 3:32 AM Christian Eggers wrote:
>
> The comparison of optname with SO_TIMESTAMPING_NEW is wrong way around,
> so SOCK_TSTAMP_NEW will first be set and than reset again. Additionally
> move it out of the test for SOF_TIMESTAMPING_RX_SOFTWARE as this seems
> unrelated.
The
On 10/9/20 3:23 PM, Hugh Dickins wrote:
> On Fri, 9 Oct 2020, Mike Kravetz wrote:
>> On 10/8/20 10:50 PM, Hugh Dickins wrote:
>>>
>>> It's a problem I've faced before in tmpfs, keeping a hold on the
>>> mapping while page lock is dropped. Quite awkward: igrab() looks as
>>> if it's the right
+Roja
Quoting Douglas Anderson (2020-10-08 15:52:32)
> Previously I landed commit 02b9aec59243 ("i2c: i2c-qcom-geni: Fix DMA
> transfer race") to fix a race we were seeing. While that most
> definitely fixed the race we were seeing, it looks like it causes
> problems in the TX path, which we
Matthew Wilcox writes:
> On Fri, Oct 09, 2020 at 03:36:47PM +0800, Huang, Ying wrote:
>> +if (PageSwapCache(head)) {
>> +swp_entry_t entry = { .val = page_private(head) };
>> +
>> +split_swap_cluster(entry);
>> +}
> ...
>> -if (PageSwapCache(head)) {
On 10/9/20 4:50 PM, Paul E. McKenney wrote:
> On Fri, Oct 09, 2020 at 02:18:41PM -0700, Tom Rix wrote:
>> On 10/9/20 1:18 PM, Paul E. McKenney wrote:
>>> On Fri, Oct 09, 2020 at 12:47:36PM -0700, t...@redhat.com wrote:
From: Tom Rix
clang static analysis reports this problem:
On Fri, Oct 9, 2020 at 6:32 AM Christian Eggers wrote:
>
> The comparison of optname with SO_TIMESTAMPING_NEW is wrong way around,
> so SOCK_TSTAMP_NEW will first be set and than reset again. Additionally
> move it out of the test for SOF_TIMESTAMPING_RX_SOFTWARE as this seems
> unrelated.
>
>
On Fri, 2020-10-09 at 10:18 +0200, Greg Kroah-Hartman wrote:
> On Fri, Oct 09, 2020 at 09:00:38AM +0100, Tabot Kevin wrote:
> > This patch fixes the following:
> > - Made sure alignment matched open parenthesis.
> >
> > Signed-off-by: Tabot Kevin
> > ---
> >
namespace.pl is intended to help locate symbols which are defined but
are not used externally. The goal is to avoid bloat of the namespace in
the resulting kernel image.
The script relies on object data, and only finds unused symbols for the
configuration used to generate that object data. This
On 10/9/20 3:50 PM, Andrew Morton wrote:
On Fri, 9 Oct 2020 14:59:52 -0700 Ralph Campbell wrote:
The code in mc_handle_swap_pte() checks for non_swap_entry() and returns
NULL before checking is_device_private_entry() so device private pages
are never handled.
Fix this by checking for
Commit 6d2c89441571 ("PCI/ERR: Update error status after reset_link()")
broke pcie_do_recovery(): updating status after reset_link() has the ill
side effect of causing recovery to fail if the error status is
PCI_ERS_RESULT_CAN_RECOVER or PCI_ERS_RESULT_NEED_RESET as the following
code will *never*
- Changes since v1:
* changed the commit message to clarify what broke post commit 6d2c89441571
* dropped the misnomer post_reset_status variable in favour of a more natural
approach that relies on a boolean to keep track of the outcome of
reset_link()
After commit 6d2c89441571 ("PCI/ERR:
Add support for the iEi WT61P803 PUZZLE LED driver.
Currently only the front panel power LED is supported.
This driver depends on the iEi WT61P803 PUZZLE MFD driver.
Signed-off-by: Luka Kovacic
Cc: Luka Perkov
Cc: Robert Marko
---
Changes for v5:
- Remove the return before goto to also
On Fri, Oct 9, 2020 at 5:57 AM Greg KH wrote:
>
> On Thu, Oct 08, 2020 at 11:57:13PM +0530, Harshal Chaudhari wrote:
> > Checking the argument passed to the ioctl is valid
> > or not. if not then return -EINVAL.
>
> Along the the comments that Arnd made, this is not the correct value to
> be
On Sat, Oct 10, 2020 at 12:23 AM Ilia Mirkin wrote:
>
> On Fri, Oct 9, 2020 at 5:54 PM Karol Herbst wrote:
> >
> > On Fri, Oct 9, 2020 at 11:35 PM Ondrej Zary wrote:
> > >
> > > Hello,
> > > I'm testing 5.9.0-rc8 and found that Riva TNT2 stopped working:
> > > [0.00] Linux version
On Fri, Oct 9, 2020 at 4:38 PM Steven Rostedt wrote:
>
> On Fri, 9 Oct 2020 14:05:48 -0700
> Sami Tolvanen wrote:
>
> > Ah yes, X86_DECODER_SELFTEST seems to be broken in tip/master. If you
> > prefer, I have these patches on top of mainline here:
> >
> >
The swap address_space doesn't have host. Thus, it makes kernel crash once
swap write meets error. Fix it.
[1] 735e4ae5ba28, vfs: track per-sb writeback errors and report them to syncfs
Signed-off-by: Minchan Kim
---
include/linux/pagemap.h | 3 ++-
1 file changed, 2 insertions(+), 1
On Fri, Oct 9, 2020 at 4:24 PM Todd Kjos wrote:
>
> When releasing a thread todo list when tearing down
> a binder_proc, the following race was possible which
> could result in a use-after-free:
>
> 1. Thread 1: enter binder_release_work from binder_thread_release
> 2. Thread 2:
On Fri, 2020-10-09 at 15:07 -0700, Sean V Kelley wrote:
> On 9 Oct 2020, at 14:30, Bjorn Helgaas wrote:
>
> > On Fri, Oct 09, 2020 at 12:57:45PM -0500, Bjorn Helgaas wrote:
> > > On Fri, Oct 02, 2020 at 11:47:32AM -0700, Sean V Kelley wrote:
> > > > From: Qiuxu Zhuo
> > > >
> > > > When
On Fri, Oct 09, 2020 at 02:18:41PM -0700, Tom Rix wrote:
>
> On 10/9/20 1:18 PM, Paul E. McKenney wrote:
> > On Fri, Oct 09, 2020 at 12:47:36PM -0700, t...@redhat.com wrote:
> >> From: Tom Rix
> >>
> >> clang static analysis reports this problem:
> >>
> >> rcutorture.c:1999:2: warning: Called
On 10/9/20 3:43 PM, Evan Green wrote:
> Enable i2c-mux-gpio devices to be defined via ACPI. The idle-state
> property translates directly to a fwnode_property_*() call. The child
> reg property translates naturally into _ADR in ACPI.
>
> The i2c-parent is a little trickier, since of's phandle
The following changes since commit 00fb259c618ea1198fc51b53a6167aa0d78672a9:
spi: bcm-qspi: Fix probe regression on iProc platforms (2020-09-24 12:09:46
+0100)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
tags/spi-fix-v5.9-rc8
On 10/9/2020 12:08 PM, Al Cooper wrote:
The Broadcom 7211 has new functionality that allows some USB low
speed side band signals, that go from the XHCI host controller to
pins on the chip, to be remapped to use any GPIO pin instead of the
limited set selectable by hardware. This can be done
On Fri, 9 Oct 2020 14:05:48 -0700
Sami Tolvanen wrote:
> Ah yes, X86_DECODER_SELFTEST seems to be broken in tip/master. If you
> prefer, I have these patches on top of mainline here:
>
> https://github.com/samitolvanen/linux/tree/clang-lto
>
> Testing your config with LTO on this tree, it
On Thu, 8 Oct 2020 17:47:31 +0900 Naoki Hayama wrote:
> Fix comment typo.
> s/abitrary/arbitrary/
>
> Signed-off-by: Naoki Hayama
Applied to net.
Hi Alex,
On 10/9/20 3:45 PM, Alexandre Courbot wrote:
> On Tue, Sep 29, 2020 at 1:44 AM Stanimir Varbanov
> wrote:
>>
>> In real use of dynamic-resolution-change it is observed that the
>> LAST buffer flag (which marks the last decoded buffer with the
>> resolution before the resolution-change
When releasing a thread todo list when tearing down
a binder_proc, the following race was possible which
could result in a use-after-free:
1. Thread 1: enter binder_release_work from binder_thread_release
2. Thread 2: binder_update_ref_for_handle() -> binder_dec_node_ilocked()
3. Thread 2: dec
On Wed, Oct 7, 2020 at 1:27 PM Pavel Machek wrote:
>
> Hi!
>
> > Add support for the iEi WT61P803 PUZZLE LED driver.
> > Currently only the front panel power LED is supported.
> >
> > This driver depends on the iEi WT61P803 PUZZLE MFD driver.
>
> > +static int
On Fri, Oct 09, 2020 at 12:14:29PM -0500, YiFei Zhu wrote:
> From: YiFei Zhu
>
> The overhead of running Seccomp filters has been part of some past
> discussions [1][2][3]. Oftentimes, the filters have a large number
> of instructions that check syscall numbers one by one and jump based
> on
On Fri, Oct 09, 2020 at 12:14:33PM -0500, YiFei Zhu wrote:
> From: YiFei Zhu
>
> Currently the kernel does not provide an infrastructure to translate
> architecture numbers to a human-readable name. Translating syscall
> numbers to syscall names is possible through FTRACE_SYSCALL
>
On Wed, 7 Oct 2020 10:17:25 + Aleksandr Nogikh wrote:
> From: Aleksandr Nogikh
>
> Remote KCOV coverage collection enables coverage-guided fuzzing of the
> code that is not reachable during normal system call execution. It is
> especially helpful for fuzzing networking subsystems, where it
On Wed, Sep 23, 2020 at 11:22:08AM -0400, Joel Fernandes (Google) wrote:
> Currently, rcu_do_batch() depends on the unsegmented callback list's len field
> to know how many CBs are executed. This fields counts down from 0 as CBs are
> dequeued. It is possible that all CBs could not be run because
On Thu, Oct 08, 2020 at 10:09:27AM -0400, Alan Stern wrote:
> On Wed, Oct 07, 2020 at 02:42:26PM -0700, Matthias Kaehlcke wrote:
> > On Wed, Oct 07, 2020 at 04:17:32PM -0400, Alan Stern wrote:
> > > The peering relation goes both ways, so it should be included in the
> > > hub_2_0 description
Hello:
This patch was applied to netdev/net.git (refs/heads/master):
On Fri, 9 Oct 2020 15:28:48 -0500 you wrote:
> When processing a system suspend request we suspend modem endpoints
> if they are enabled, and call ipa_cmd_tag_process() (which issues
> IPA commands) to ensure the IPA pipeline
On 09/10/2020 20.34, Alex Dewar wrote:
> The variable async_registration is used to indicate whether or not
> CONFIG_BCACHE_ASYNC_REGISTRATION is enabled, triggering a (false)
> warning in Coverity about unreachable code. However, it seems clearer in
> this case just to use an #ifdef, so let's do
1 - 100 of 1188 matches
Mail list logo
