kernel.org
Signed-off-by: Greg Kroah-Hartman
My current working setup with 4.19.41 is as follows:
root@thinkpad:/home/cijoml# hcitool con
Connections:
> ACL 00:07:61:49:2A:6A handle 69 state 1 lm MASTER AUTH ENCRYPT
> ACL 00:07:61:3E:1C:71 handle 71 state 1 lm MASTER AUTH ENCRYPT
&
Hello,
after years of not using the dongle I wanted to use it. And I ended up
like this. Previously dongle worked correctly. It is not broken I
checked it in Windows.
[ 22.050048] usb 3-1: new high-speed USB device number 3 using xhci_hcd
[ 22.190321] usb 3-1: New USB device found,
Hello,
after years of not using the dongle I wanted to use it. And I ended up
like this. Previously dongle worked correctly. It is not broken I
checked it in Windows.
[ 22.050048] usb 3-1: new high-speed USB device number 3 using xhci_hcd
[ 22.190321] usb 3-1: New USB device found,
Hello guys,
please find out down this email patch to support EVOLVEO XtraTV stick.
This tuner is for android phones with microusb connecter, however with
reduction it works perfectly with linux kernel:
The device identify itself at USB bus as Bus 002 Device 004: ID
1f4d:a115 G-Tek Electronics
Hello guys,
please find out down this email patch to support EVOLVEO XtraTV stick.
This tuner is for android phones with microusb connecter, however with
reduction it works perfectly with linux kernel:
The device identify itself at USB bus as Bus 002 Device 004: ID
1f4d:a115 G-Tek Electronics
://daisy.servodata.cz/~cijoml/D-link_DVG-G1402S-inside/
Thanks a lot for reply
Michal
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please re
://daisy.servodata.cz/~cijoml/D-link_DVG-G1402S-inside/
Thanks a lot for reply
Michal
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http
Hi Kim,
I own same card as you - do you also have interrupts errors while playing
stream?
notas:/home/cijoml# cat /proc/interrupts
CPU0
0:2954366XT-PIC-XTtimer
1: 21558XT-PIC-XTi8042
2: 0XT-PIC-XTcascade
4: 63639
Hi Kim,
I own same card as you - do you also have interrupts errors while playing
stream?
notas:/home/cijoml# cat /proc/interrupts
CPU0
0:2954366XT-PIC-XTtimer
1: 21558XT-PIC-XTi8042
2: 0XT-PIC-XTcascade
4: 63639
Hi All,
I have now free IBM H70 with old SSA Array (1 TB discs) and would like use it
as a samba share.
Everythink is working except the SSA card accessing the array:
0001:40:0b.0 SSA: IBM SSA Adapter [Advanced SerialRAID/X] (rev 06)
Is there driver available for this card?
Thanks a lot for
Hi All,
I have now free IBM H70 with old SSA Array (1 TB discs) and would like use it
as a samba share.
Everythink is working except the SSA card accessing the array:
0001:40:0b.0 SSA: IBM SSA Adapter [Advanced SerialRAID/X] (rev 06)
Is there driver available for this card?
Thanks a lot for
Dne so 8. prosince 2007 Mauricio Mauad Menegaz Filho napsal(a):
> 2007/12/7, CIJOML <[EMAIL PROTECTED]>:
> > Hi there,
> > ...
> > Can anybody else confirm this and contact those companies for source
> > codes?
>
> It seems that the sources are there:
>
Dne so 8. prosince 2007 Mauricio Mauad Menegaz Filho napsal(a):
2007/12/7, CIJOML [EMAIL PROTECTED]:
Hi there,
...
Can anybody else confirm this and contact those companies for source
codes?
It seems that the sources are there:
http://www.ertos.nicta.com.au/software/
Mauad
Hi
Hi there,
it looks like there is running linux somewhere inside in the radio part of the
firmware...
http://forum.xda-developers.com/archive/index.php/t-326419.html
$ strings kaiser_radio_0x301.nb |grep -i linux
M6500C L4/Linux
L4 Linux
NICTNICTA::Pistachio - built on Jan 23 2007 18:10:22
Hi there,
it looks like there is running linux somewhere inside in the radio part of the
firmware...
http://forum.xda-developers.com/archive/index.php/t-326419.html
$ strings kaiser_radio_0x301.nb |grep -i linux
M6500C L4/Linux
L4 Linux
NICTNICTA::Pistachio - built on Jan 23 2007 18:10:22
(a):
> Hi Michal,
>
> On Monday 29 October 2007, CIJOML wrote:
> > Dne čt 22. února 2007 Dmitry Torokhov napsal(a):
> > > Plus I
> > > will export uniq in /proc/bus/input/devices and then yo can ask X guys
> > > to allow matching on uniq as well.
>
(a):
Hi Michal,
On Monday 29 October 2007, CIJOML wrote:
Dne čt 22. února 2007 Dmitry Torokhov napsal(a):
Plus I
will export uniq in /proc/bus/input/devices and then yo can ask X guys
to allow matching on uniq as well.
Hi Dmitri,
I watched at 2.6.23 and this is still not done yet
Dne čt 22. února 2007 Dmitry Torokhov napsal(a):
> On 2/21/07, CIJOML <[EMAIL PROTECTED]> wrote:
> > Dne čtvrtek 22 únor 2007 00:00 Marcel Holtmann napsal(a):
> > > Hi Michal,
> > >
> > > > I need this for differing Option "XkbModel" in Xorg,
Dne čt 22. února 2007 Dmitry Torokhov napsal(a):
On 2/21/07, CIJOML [EMAIL PROTECTED] wrote:
Dne čtvrtek 22 únor 2007 00:00 Marcel Holtmann napsal(a):
Hi Michal,
I need this for differing Option XkbModel in Xorg, so I can bind to
each device it's model and has correct xev's
Hi all,
today I have expirienced soft lockup at 2.6.21 kernel. 2.6.22 is taking me
same problem:
BUG: soft lockup detected on CPU#0!
[] softlockup_tick+0x98/0xb5
[] update_process_times+0x33/0x55
[] tick_nohz_handler+0x54/0xb4
[] smp_apic_timer_interrupt+0x62/0x72
[]
Hi all,
today I have expirienced soft lockup at 2.6.21 kernel. 2.6.22 is taking me
same problem:
BUG: soft lockup detected on CPU#0!
[c013e904] softlockup_tick+0x98/0xb5
[c01204f8] update_process_times+0x33/0x55
[c012e48f] tick_nohz_handler+0x54/0xb4
[c0110a59]
Hi all,
please take care about following bug commited at bugzilla:
http://bugzilla.kernel.org/show_bug.cgi?id=8603
Thanks a lot!
Michal
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at
Hi all,
please take care about following bug commited at bugzilla:
http://bugzilla.kernel.org/show_bug.cgi?id=8603
Thanks a lot!
Michal
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to [EMAIL PROTECTED]
More majordomo info at
Hi guys,
can anybody help me find current usb.ids maintainer? David Brownell is not
responding and latest official version is 5 mounths old.
I could take ownership if nobody takes care.
Thanks for reply
Michal
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the
Hi guys,
can anybody help me find current usb.ids maintainer? David Brownell is not
responding and latest official version is 5 mounths old.
I could take ownership if nobody takes care.
Thanks for reply
Michal
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body
Hi Stefan,
thanks for verification on not tainted kernel. I made same test with same
error with/without tainted kernel too.
Michal
Dne pondělí 07 květen 2007 09:40 Stefan Seyfried napsal(a):
> On Mon, May 07, 2007 at 12:05:33AM +0200, CIJOML wrote:
> > Hi all,
> >
> > tod
Hi Stefan,
thanks for verification on not tainted kernel. I made same test with same
error with/without tainted kernel too.
Michal
Dne pondělí 07 květen 2007 09:40 Stefan Seyfried napsal(a):
On Mon, May 07, 2007 at 12:05:33AM +0200, CIJOML wrote:
Hi all,
today I experienced OOPS when
is 100% opensource :)
And BTW this happens also with madwifi kernel modules unloaded.
Best regards
Michal
Dne pondělí 07 květen 2007 00:34 jste napsal(a):
> Hi Michal,
>
> On 07/05/07, CIJOML <[EMAIL PROTECTED]> wrote:
> > Hi all,
> >
> > today I experience
Hi all,
today I experienced OOPS when connected via BT/GPRS to the internet, then
swsup and resumed with dongle in HID proxy mode. Please see details in dmesg
log:
Restarting tasks ... <6>usb 3-1: USB disconnect, address 3
done.
BUG: unable to handle kernel NULL pointer dereference at virtual
Hi all,
today I experienced OOPS when connected via BT/GPRS to the internet, then
swsup and resumed with dongle in HID proxy mode. Please see details in dmesg
log:
Restarting tasks ... 6usb 3-1: USB disconnect, address 3
done.
BUG: unable to handle kernel NULL pointer dereference at virtual
is 100% opensource :)
And BTW this happens also with madwifi kernel modules unloaded.
Best regards
Michal
Dne pondělí 07 květen 2007 00:34 jste napsal(a):
Hi Michal,
On 07/05/07, CIJOML [EMAIL PROTECTED] wrote:
Hi all,
today I experienced OOPS when connected via BT/GPRS to the internet
eginning. I assure
> you, that I consider this fix to be very important, and I really would love
> to see it hit mainline. However, given the situation, it is not
> appropriate to push these in during -rc7
>
> I have doubts on CIJOML's testing method -- there is no way he could ha
One more addiction:
As a side effect this fixes also kernel crash, when you swsusp/swresume with
USB dongle and playing DVB stream.
Michal
Dne pondělí 16 duben 2007 16:15 Adrian Bunk napsal(a):
> On Sun, Apr 15, 2007 at 08:33:38PM -0400, Michael Krufky wrote:
> > Mauro,
> >
> > I've been out
Hi,
I have tested these patches with:
Freecom DVB-T dongle
Pluto2 pcmcia card
Leadtek WinFast DTV dongle 1st generation
Leadtek WinFast DTV dongle 2nd generation
These are 4 different devices with 4 different hw and modules.
All works. Please apply.
Michal
Dne pondělí 16 duben 2007 16:15
Hi,
I have tested these patches with:
Freecom DVB-T dongle
Pluto2 pcmcia card
Leadtek WinFast DTV dongle 1st generation
Leadtek WinFast DTV dongle 2nd generation
These are 4 different devices with 4 different hw and modules.
All works. Please apply.
Michal
Dne pondělí 16 duben 2007 16:15
One more addiction:
As a side effect this fixes also kernel crash, when you swsusp/swresume with
USB dongle and playing DVB stream.
Michal
Dne pondělí 16 duben 2007 16:15 Adrian Bunk napsal(a):
On Sun, Apr 15, 2007 at 08:33:38PM -0400, Michael Krufky wrote:
Mauro,
I've been out of town
to see it hit mainline. However, given the situation, it is not
appropriate to push these in during -rc7
I have doubts on CIJOML's testing method -- there is no way he could have
unplugged the device while in use, while running 2.6.20.y and not receive
an OOPS. CIJOML, please see the bottom
>
> Markus
>
> On 3/16/07, Oliver Neukum <[EMAIL PROTECTED]> wrote:
> > Am Freitag, 16. März 2007 10:13 schrieb CIJOML:
> > > Hi,
> > >
> > > looks like more general problem with 2.6.21-rc3. This happens when I
> >
> > remove my
&
PROTECTED] wrote:
Am Freitag, 16. März 2007 10:13 schrieb CIJOML:
Hi,
looks like more general problem with 2.6.21-rc3. This happens when I
remove my
PCMCIA USB2.0/IEEE1384 adapter from slot:
Yes, the more important it is to know whether -rc2 works.
And please report
fig hci1 revision
hci1: Type: USB
BD Address: 00:07:61:46:8F:98 ACL MTU: 1017:8 SCO MTU: 64:0
Firmware 0.65 / 71
Michal
Dne neděle 25 březen 2007 12:18 Jiri Kosina napsal(a):
> On Sun, 25 Mar 2007, CIJOML wrote:
> > in combination of kernel 2.6.20-mh1 and hid2hci from blu
Hi hid guys,
in combination of kernel 2.6.20-mh1 and hid2hci from bluez-utils-3.9
I am getting following OOPS:
BUG: at drivers/hid/hid-core.c:785 implement()
[] hid_output_report+0x213/0x2be
[] hid_submit_ctrl+0x52/0x1bc [usbhid]
[] usbhid_submit_report+0x154/0x187 [usbhid]
[]
Hi hid guys,
in combination of kernel 2.6.20-mh1 and hid2hci from bluez-utils-3.9
I am getting following OOPS:
BUG: at drivers/hid/hid-core.c:785 implement()
[c027a9c3] hid_output_report+0x213/0x2be
[fcaf73fb] hid_submit_ctrl+0x52/0x1bc [usbhid]
[fcaf76b9] usbhid_submit_report+0x154/0x187
, CIJOML wrote:
in combination of kernel 2.6.20-mh1 and hid2hci from bluez-utils-3.9 I
am getting following OOPS:
BUG: at drivers/hid/hid-core.c:785 implement()
[c027a9c3] hid_output_report+0x213/0x2be
[fcaf73fb] hid_submit_ctrl+0x52/0x1bc [usbhid]
[fcaf76b9] usbhid_submit_report+0x154
Dne čtvrtek 15 březen 2007 15:02 Oliver Neukum napsal(a):
> Am Donnerstag, 15. März 2007 12:26 schrieb CIJOML:
> > Hi,
> >
> > 2.6.20 is fine
> >
> > Michal
>
> Could you narrow it down a bit? Does rc2 work?
>
> Regards
>
napsal(a):
Am Donnerstag, 15. März 2007 12:26 schrieb CIJOML:
Hi,
2.6.20 is fine
Michal
Could you narrow it down a bit? Does rc2 work?
Regards
Oliver
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to [EMAIL PROTECTED
Dne čtvrtek 15 březen 2007 09:03 Andrew Morton napsal(a):
> > On Fri, 9 Mar 2007 16:41:53 +0100 CIJOML <[EMAIL PROTECTED]> wrote:
> > Hi,
> >
> > I am trying change Freecom DVB-T dongle with Leadtek DVB-T dongle and I
> > got this OOPS:
> >
> > --
Dne čtvrtek 15 březen 2007 09:03 Andrew Morton napsal(a):
On Fri, 9 Mar 2007 16:41:53 +0100 CIJOML [EMAIL PROTECTED] wrote:
Hi,
I am trying change Freecom DVB-T dongle with Leadtek DVB-T dongle and I
got this OOPS:
--
usb 2-3: new high speed USB
Hi,
I am trying change Freecom DVB-T dongle with Leadtek DVB-T dongle and I got
this OOPS:
--
usb 2-3: new high speed USB device using ehci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
dvb-usb: found a 'WideView WT-220U PenType Receiver
Hi,
I am trying change Freecom DVB-T dongle with Leadtek DVB-T dongle and I got
this OOPS:
--
usb 2-3: new high speed USB device using ehci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
dvb-usb: found a 'WideView WT-220U PenType Receiver
Hi Marco,
I just tested your driver you have posted to the linux-dvb mailing list.
I have problem load firmware into device:
usb 5-3: new high speed USB device using ehci_hcd and address 4
usb 5-3: configuration #1 chosen from 1 choice
dvb-usb: found a 'Opera1 DVB-S USB2.0' in cold state, will
Hi Marco,
I just tested your driver you have posted to the linux-dvb mailing list.
I have problem load firmware into device:
usb 5-3: new high speed USB device using ehci_hcd and address 4
usb 5-3: configuration #1 chosen from 1 choice
dvb-usb: found a 'Opera1 DVB-S USB2.0' in cold state, will
Dne čtvrtek 22 únor 2007 00:00 Marcel Holtmann napsal(a):
> Hi Michal,
>
> > I need this for differing Option "XkbModel" in Xorg, so I can bind to
> > each device it's model and has correct xev's scancodes based on model. So
> > I prefer to have as Phis just only BDADDR, because for me this
Marcel how can you differ what is src and what is dst, when device can connect
first time from hub to keyboard and later keyboard to hub?
Michal
Dne středa 21 únor 2007 23:53 Marcel Holtmann napsal(a):
> Hi Dmitry,
>
> > > > > can anybody reply to this and share his/her opinion?
> > > >
> > > >
I need this for differing Option "XkbModel" in Xorg, so I can bind to each
device it's model and has correct xev's scancodes based on model.
So I prefer to have as Phis just only BDADDR, because for me this doesn't make
sense to have there device to which keyboard connect. Then I should have 1
Hi Dmitry,
there are correct values, but not in
/proc/bus/input/devices, where is value non of my devices owns.
Michal
Dne středa 21 únor 2007 23:43 Dmitry Torokhov napsal(a):
> On 2/21/07, CIJOML <[EMAIL PROTECTED]> wrote:
> > So where is that damned bug, that I don't
So where is that damned bug, that I don't see those uniq BDADDRESSes there?
Michal
Dne středa 21 únor 2007 23:27 Dmitry Torokhov napsal(a):
> On 2/21/07, CIJOML <[EMAIL PROTECTED]> wrote:
> > Hi,
> >
> > can anybody reply to this and share his/her opinion?
>
>
Hi,
can anybody reply to this and share his/her opinion?
Thanks a lot
Michal
-- Předaná zpráva --
Subject: Re: Phis in /proc/bus/input/devices same for all devices?
Date: středa 21 únor 2007 23:06
From: Marcel Holtmann <[EMAIL PROTECTED]>
To: CIJOML <[EMAIL PROTE
Hi,
can anybody reply to this and share his/her opinion?
Thanks a lot
Michal
-- Předaná zpráva --
Subject: Re: Phis in /proc/bus/input/devices same for all devices?
Date: středa 21 únor 2007 23:06
From: Marcel Holtmann [EMAIL PROTECTED]
To: CIJOML [EMAIL PROTECTED]
Cc
So where is that damned bug, that I don't see those uniq BDADDRESSes there?
Michal
Dne středa 21 únor 2007 23:27 Dmitry Torokhov napsal(a):
On 2/21/07, CIJOML [EMAIL PROTECTED] wrote:
Hi,
can anybody reply to this and share his/her opinion?
Input core already exports uniq to udev
Hi Dmitry,
there are correct values, but not in
/proc/bus/input/devices, where is value non of my devices owns.
Michal
Dne středa 21 únor 2007 23:43 Dmitry Torokhov napsal(a):
On 2/21/07, CIJOML [EMAIL PROTECTED] wrote:
So where is that damned bug, that I don't see those uniq BDADDRESSes
I need this for differing Option XkbModel in Xorg, so I can bind to each
device it's model and has correct xev's scancodes based on model.
So I prefer to have as Phis just only BDADDR, because for me this doesn't make
sense to have there device to which keyboard connect. Then I should have 1
Marcel how can you differ what is src and what is dst, when device can connect
first time from hub to keyboard and later keyboard to hub?
Michal
Dne středa 21 únor 2007 23:53 Marcel Holtmann napsal(a):
Hi Dmitry,
can anybody reply to this and share his/her opinion?
Input core
Dne čtvrtek 22 únor 2007 00:00 Marcel Holtmann napsal(a):
Hi Michal,
I need this for differing Option XkbModel in Xorg, so I can bind to
each device it's model and has correct xev's scancodes based on model. So
I prefer to have as Phis just only BDADDR, because for me this doesn't
make
Hi,
please take a look at my bugreport. It is very important for me...
http://bugzilla.kernel.org/show_bug.cgi?id=7936
Thanks a lot
Michal
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at
Hi,
please take a look at my bugreport. It is very important for me...
http://bugzilla.kernel.org/show_bug.cgi?id=7936
Thanks a lot
Michal
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to [EMAIL PROTECTED]
More majordomo info at
napsal(a):
> On Thu, Jan 11, 2007 at 11:21:23AM +0100, Jiri Kosina wrote:
> > On Thu, 11 Jan 2007, Adrian Bunk wrote:
> > > > >Subject: BUG: at fs/inotify.c:172 set_dentry_child_flags()
> > > > >References : http://bugzilla.kernel.org/show_bug.cgi?id=7785
napsal(a):
On Thu, Jan 11, 2007 at 11:21:23AM +0100, Jiri Kosina wrote:
On Thu, 11 Jan 2007, Adrian Bunk wrote:
Subject: BUG: at fs/inotify.c:172 set_dentry_child_flags()
References : http://bugzilla.kernel.org/show_bug.cgi?id=7785
Submitter : Cijoml Cijomlovic Cijomlov [EMAIL
On Sun, 31 Jul 2005, Michael Krufky wrote:
> Andrew Morton wrote:
>
> >Michal Semler <[EMAIL PROTECTED]> wrote:
> >
> >
> >> This is what I gets into dmesg:
> >>
> >> Linux video capture interface: v1.00
> >> bttv: driver version 0.9.15 loaded
> >> bttv: using 8 buffers with 2080k (520 pages)
Hi,
my card is impossible to be autodetected. Valid sections for it's
identification are missing.
I asked for this some time ago. I need to use insmod option.
Michal
On Sun, 31 Jul 2005, Michael Krufky wrote:
> Andrew Morton wrote:
>
> >Michal Semler <[EMAIL PROTECTED]> wrote:
> >
> >
> >>
Hi,
my card is impossible to be autodetected. Valid sections for it's
identification are missing.
I asked for this some time ago. I need to use insmod option.
Michal
On Sun, 31 Jul 2005, Michael Krufky wrote:
Andrew Morton wrote:
Michal Semler [EMAIL PROTECTED] wrote:
This is what I
On Sun, 31 Jul 2005, Michael Krufky wrote:
Andrew Morton wrote:
Michal Semler [EMAIL PROTECTED] wrote:
This is what I gets into dmesg:
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv:
71 matches
Mail list logo