++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
On Thu, 6 Jun 2024 at 01:48, Chris Lew wrote:
>
> Hi Dmitry,
>
> On 5/11/2024 2:56 PM, Dmitry Baryshkov wrote:
> ...
> > @@ -76,12 +76,12 @@ static int pdr_locator_new_server(struct qmi_handle
> > *qmi,
> > locator_h
ot/dts/qcom/sm7225-fairphone-fp4.dts | 58
> +-
> 3 files changed, 108 insertions(+), 1 deletion(-)
>
Usually the SoC changes come in a separate patch, but I won't insist on
that.
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
.
>
> Reviewed-by: Bryan O'Donoghue
> Reviewed-by: Konrad Dybcio
> Signed-off-by: Luca Weiss
> ---
> arch/arm64/boot/dts/qcom/pm7250b.dtsi | 40
> +++
> 1 file changed, 40 insertions(+)
>
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
iss
> ---
> arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++
> 1 file changed, 6 insertions(+)
>
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
On Thu, 23 May 2024 at 01:48, Bjorn Andersson wrote:
>
> On Tue, May 21, 2024 at 03:08:31PM +0200, Dmitry Baryshkov wrote:
> > On Tue, 21 May 2024 at 13:20, Kalle Valo wrote:
> > >
> > > Dmitry Baryshkov writes:
> > >
> > > > On Tue, 21 May 202
ts/qcom/sa8775p-ride.dts | 25 +
> 1 file changed, 25 insertions(+)
>
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
-by: Bartosz Golaszewski
> ---
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 332
> ++
> 1 file changed, 332 insertions(+)
>
With nsp0 vs nsp1 vs nsp sorted out:
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
On Mon, May 27, 2024 at 10:43:50AM +0200, Bartosz Golaszewski wrote:
> From: Tengfei Fan
>
> Add support for PIL loading on ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 on
> SA8775p SoCs.
>
> Signed-off-by: Tengfei Fan
> Co-developed-by: Bartosz Golaszewski
> Signed-off-by: Bartosz Golaszewski
>
On Wed, 22 May 2024 at 22:22, Jeff Johnson wrote:
>
> On 5/21/2024 2:45 AM, Dmitry Baryshkov wrote:
> > Make the driver use qcom_fw_helper to autodetect the path to the
> > calibration data file.
> >
> > Signed-off-by: Dmitry Baryshkov
> > ---
>
On Tue, 21 May 2024 at 13:20, Kalle Valo wrote:
>
> Dmitry Baryshkov writes:
>
> > On Tue, 21 May 2024 at 12:52, wrote:
> >>
> >> On 21/05/2024 11:45, Dmitry Baryshkov wrote:
> >> > Qualcomm platforms have different sets of the firmware files,
On Tue, 21 May 2024 at 12:52, wrote:
>
> On 21/05/2024 11:45, Dmitry Baryshkov wrote:
> > Qualcomm platforms have different sets of the firmware files, which
> > differ from platform to platform (and from board to board, due to the
> > embedded signatures). Rather than
On Tue, 21 May 2024 at 12:49, wrote:
>
> On 21/05/2024 11:45, Dmitry Baryshkov wrote:
> > We have been pushing userspace to use mbn files by default for ages.
> > As a preparation for making the firmware-name optional, make the driver
> > use .mbn instead of .mdt files by
As the drivers default to loading the firmware from the board-specific
location, drop the firmware-name properties.
Signed-off-by: Dmitry Baryshkov
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
b
As the drivers default to loading the firmware from the board-specific
location, drop the firmware-name properties. In case of the WCNSS
calibration data drop the path to the file, retaining just the file
name.
Signed-off-by: Dmitry Baryshkov
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 5
Make the driver use qcom_fw_helper to autodetect the path to the
calibration data file.
Signed-off-by: Dmitry Baryshkov
---
drivers/remoteproc/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 7bb22fdb64e4..e0ffcaeca03d
Make the driver use qcom_fw_helper to autodetect the path to the
calibration data file.
Signed-off-by: Dmitry Baryshkov
---
drivers/remoteproc/qcom_wcnss.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index
We have been pushing userspace to use mbn files by default for ages.
As a preparation for making the firmware-name optional, make the driver
use .mbn instead of .mdt files by default.
Signed-off-by: Dmitry Baryshkov
---
drivers/remoteproc/qcom_wcnss.c | 2 +-
1 file changed, 1 insertion(+), 1
Make the driver use qcom_fw_helper to autodetect the path to the
calibration data file.
Signed-off-by: Dmitry Baryshkov
---
drivers/remoteproc/Kconfig | 1 +
drivers/remoteproc/qcom_q6v5_pas.c | 9 +
2 files changed, 10 insertions(+)
diff --git a/drivers/remoteproc/Kconfig b
We have been pushing userspace to use mbn files by default for ages.
As a preparation for making the firmware-name optional, make the driver
use .mbn instead of .mdt files by default.
Signed-off-by: Dmitry Baryshkov
---
drivers/remoteproc/qcom_q6v5_pas.c | 76
Make the driver use qcom_fw_helper to autodetect the path to the
calibration data file.
Signed-off-by: Dmitry Baryshkov
---
drivers/remoteproc/Kconfig | 1 +
drivers/remoteproc/qcom_q6v5_mss.c | 10 ++
2 files changed, 11 insertions(+)
diff --git a/drivers/remoteproc/Kconfig b
We have been pushing userspace to use mbn files by default for ages.
As a preparation for making the firmware-name optional, make the driver
use .mbn instead of .mdt files by default.
Signed-off-by: Dmitry Baryshkov
---
drivers/remoteproc/qcom_q6v5_mss.c | 2 +-
1 file changed, 1 insertion
Make the driver use qcom_fw_helper to autodetect the path to the
calibration data file.
Signed-off-by: Dmitry Baryshkov
---
drivers/soc/qcom/Kconfig | 1 +
drivers/soc/qcom/wcnss_ctrl.c | 9 +
2 files changed, 10 insertions(+)
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc
Make the driver use qcom_fw_helper to autodetect the path to the
calibration data file.
Signed-off-by: Dmitry Baryshkov
---
drivers/net/wireless/ath/wcn36xx/Kconfig | 1 +
drivers/net/wireless/ath/wcn36xx/main.c | 5 +
2 files changed, 6 insertions(+)
diff --git a/drivers/net/wireless/ath
node compatible.
Suggested-by: Arnd Bergmann
Signed-off-by: Dmitry Baryshkov
---
drivers/soc/qcom/Kconfig | 5 +++
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom_fw_helper.c | 86 ++
include/linux/soc/qcom/fw_helper.h | 10
m8250/Thundercomm/RB5/cdsp.mbn -> ../../cdsp.mbn
+Link: qcom/sm8250/Thundercomm/RB5/cdspr.jsn -> ../../cdspr.jsn
Suggested-by: Arnd Bergmann
Signed-off-by: Dmitry Baryshkov
---
Dmitry Baryshkov (12):
soc: qcom: add firmware name helper
wifi: wcn36xx: make use of QCOM_FW_HELPER
Signed-off-by: Dmitry Baryshkov
---
drivers/soc/qcom/Kconfig| 4 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/pdr_internal.h | 306 ++
drivers/soc/qcom/qcom_pdr_msg.c | 319
4 files changed, 334
a
protection domains map for a particular board. It is not possible to
implement it as a 'driver' as there is no corresponding device.
Tested-by: Steev Klimaszewski
Tested-by: Alexey Minnekhanov
Signed-off-by: Dmitry Baryshkov
---
drivers/soc/qcom/Kconfig | 11 +
drivers/soc/qcom/Makefile
Request in-kernel protection domain mapper to be started before starting
Qualcomm DSP and release it once DSP is stopped. Once all DSPs are
stopped, the PD mapper will be stopped too.
Signed-off-by: Dmitry Baryshkov
---
drivers/remoteproc/qcom_common.c| 87
lpers")
Tested-by: Steev Klimaszewski
Tested-by: Alexey Minnekhanov
Signed-off-by: Dmitry Baryshkov
---
drivers/soc/qcom/pdr_interface.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/pdr_interface.c b/drivers/soc/qcom/pdr_interface.c
index e0
ot working on sc8280xp
- Added missing configuration for QCS404
---
Dmitry Baryshkov (5):
soc: qcom: pdr: protect locator_addr with the main mutex
soc: qcom: pdr: fix parsing of domains lists
soc: qcom: pdr: extract PDR message marshalling data
soc: qcom: add pd-mapper impl
eil Armstrong # on SM8550-QRD
Tested-by: Steev Klimaszewski
Tested-by: Alexey Minnekhanov
Signed-off-by: Dmitry Baryshkov
---
drivers/soc/qcom/pdr_interface.c | 15 +++
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/soc/qcom/pdr_interface.c b/drivers/soc/qcom/pd
On Thu, 25 Apr 2024 at 22:30, Chris Lew wrote:
>
>
> On 4/24/2024 2:27 AM, Dmitry Baryshkov wrote:
> > If the service locator server is restarted fast enough, the PDR can
> > rewrite locator_addr fields concurrently. Protect them by placing
> > modification of thos
On Sat, 27 Apr 2024 at 04:03, Chris Lew wrote:
>
>
>
> On 4/24/2024 2:28 AM, Dmitry Baryshkov wrote:
> > diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c
> > b/drivers/remoteproc/qcom_q6v5_adsp.c
> > index 1d24c9b656a8..02d0c626b03b 100644
> > --- a/drivers/r
On Thu, 25 Apr 2024 at 10:08, Steev Klimaszewski wrote:
>
> Hi Dmitry,
>
> On Wed, Apr 24, 2024 at 4:28 AM Dmitry Baryshkov
> wrote:
> >
> > Protection domain mapper is a QMI service providing mapping between
> > 'protection domains' and services sup
a
protection domains map for a particular board. It is not possible to
implement it as a 'driver' as there is no corresponding device.
Signed-off-by: Dmitry Baryshkov
---
drivers/soc/qcom/Kconfig | 10 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/pdr_internal.h| 14
Request in-kernel protection domain mapper to be started before starting
Qualcomm DSP and release it once DSP is stopped. Once all DSPs are
stopped, the PD mapper will be stopped too.
Signed-off-by: Dmitry Baryshkov
---
drivers/remoteproc/Kconfig | 4
drivers/remoteproc
Add qmi_del_server(), a pair to qmi_add_server(), a way to remove
running server from the QMI socket. This is e.g. necessary for
pd-mapper, which needs to readd a server each time the DSP is started or
stopped.
Tested-by: Neil Armstrong # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov
The in-kernel PD mapper is going to use same message structures as the
QCOM_PDR_HELPERS module. Extract message marshalling data to separate
module that can be used by both PDR helpers and by PD mapper.
Reviewed-by: Bryan O'Donoghue
Signed-off-by: Dmitry Baryshkov
---
drivers/soc/qcom/Kconfig
lpers")
Signed-off-by: Dmitry Baryshkov
---
drivers/soc/qcom/pdr_interface.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/pdr_interface.c b/drivers/soc/qcom/pdr_interface.c
index 19cfe4b41235..3c6f2d21e5e4 100644
--- a/drivers/soc/qcom/pdr_interface.c
+++
g
Changes in RFC v2:
- Swapped num_domains / domains (Konrad)
- Fixed an issue with battery not working on sc8280xp
- Added missing configuration for QCS404
---
Dmitry Baryshkov (6):
soc: qcom: pdr: protect locator_addr with the main mutex
soc: qcom: pdr: fix parsing of domains lists
eil Armstrong # on SM8550-QRD
Signed-off-by: Dmitry Baryshkov
---
drivers/soc/qcom/pdr_interface.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/qcom/pdr_interface.c b/drivers/soc/qcom/pdr_interface.c
index a1b6a4081dea..19cfe4b41235 100644
--- a/dri
adsp:
930.remoteproc:glink-edge.LOOPBACK_CTL_LPASS.-1.-1
930.remoteproc:glink-edge.glink_ssr.-1.-1
930.remoteproc:glink-edge.rpmsg_chrdev.0.0
Reviewed-by: Konrad Dybcio
Signed-off-by: Dmitry Baryshkov
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 22 ++
1 file
From: Srinivas Kandagatla
The ADSP provides fastrpc/compute capabilities. Enable support for the
fastrpc on this DSP.
Signed-off-by: Srinivas Kandagatla
Signed-off-by: Dmitry Baryshkov
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 57 +++
1 file changed, 57
Enable the FastRPC and glink-edge nodes on MSM8996 platform. Tested on
APQ8096 Dragonboard820c.
Signed-off-by: Dmitry Baryshkov
---
Changes in v2:
- Fixed order of compute nodes (Konrad)
- Link to v1:
https://lore.kernel.org/r/20240401-msm8996-remoteproc-v1-0-f02ab47fc...@linaro.org
---
Dmitry
MSM8996 has limited glink support, allow glink-edge node on MSM8996
platform.
Acked-by: Rob Herring
Signed-off-by: Dmitry Baryshkov
---
Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml | 1 -
1 file changed, 1 deletion(-)
diff --git
a/Documentation/devicetree/bindings
On Thu, Apr 11, 2024 at 09:59:35PM +0200, Krzysztof Kozlowski wrote:
> On 10/04/2024 04:20, Ondřej Jirman wrote:
> > On Mon, Apr 08, 2024 at 10:12:30PM GMT, Krzysztof Kozlowski wrote:
> >> On 08/04/2024 17:17, Ondřej Jirman wrote:
> >>>
> >>> Now for things to not fail during suspend/resume based
On Tue, 9 Apr 2024 at 21:37, Luca Weiss wrote:
>
> Follow the gpio-hog bindings and use otg-hog as node name.
>
> Signed-off-by: Luca Weiss
> ---
> arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
&
On Tue, Apr 09, 2024 at 01:04:12PM +0200, Pavel Machek wrote:
> Hi!
>
> > > This is driver for ANX7688 USB-C HDMI, with flashing and debugging
> > > features removed. ANX7688 is rather criticial piece on PinePhone,
> > > there's no display and no battery charging without it.
> > >
> > > There's
4 insertions(+)
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
On Tue, 2 Apr 2024 at 17:47, Konrad Dybcio wrote:
>
> On 31.03.2024 11:10 PM, Dmitry Baryshkov wrote:
> > From: Srinivas Kandagatla
> >
> > The ADSP provides fastrpc/compute capabilities. Enable support for the
> > fastrpc on this DSP.
> >
> > Signed-o
From: Srinivas Kandagatla
The ADSP provides fastrpc/compute capabilities. Enable support for the
fastrpc on this DSP.
Signed-off-by: Srinivas Kandagatla
Signed-off-by: Dmitry Baryshkov
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 57 +++
1 file changed, 57
adsp:
930.remoteproc:glink-edge.LOOPBACK_CTL_LPASS.-1.-1
930.remoteproc:glink-edge.glink_ssr.-1.-1
930.remoteproc:glink-edge.rpmsg_chrdev.0.0
Signed-off-by: Dmitry Baryshkov
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 22 ++
1 file changed, 22 insertions(+)
diff
MSM8996 has limited glink support, allow glink-edge node on MSM8996
platform.
Signed-off-by: Dmitry Baryshkov
---
Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml | 1 -
1 file changed, 1 deletion(-)
diff --git
a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996
Enable the FastRPC and glink-edge nodes on MSM8996 platform. Tested on
APQ8096 Dragonboard820c.
Signed-off-by: Dmitry Baryshkov
---
Dmitry Baryshkov (2):
dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
arm64: dts: qcom: msm8996: add glink-edge nodes
On Fri, 22 Mar 2024 at 10:03, Luca Weiss wrote:
>
> Configure the Type-C and VBUS regulator on PM7250B and wire it up to the
> USB PHY, so that USB role and orientation switching works.
>
> Signed-off-by: Luca Weiss
> ---
> With this patch I'm not quite sure if the 'ports' are connected
>
5d296bad640 ("usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE")
Thanks! LGTM
> ---
> drivers/usb/typec/mux/Kconfig| 2 +-
> drivers/usb/typec/mux/ptn36502.c | 44
> ++--
> 2 files changed, 3 insertions(+), 43 deletions(-)
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
no-castor.dts | 2 ++
> 1 file changed, 2 insertions(+)
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
On Wed, 6 Mar 2024 at 01:26, Luca Weiss wrote:
>
> Set the debounce-interval for the GPIO keys.
>
> Signed-off-by: Luca Weiss
> ---
> arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 2 ++
> 1 file changed, 2 insertions(+)
Reviewed-by: Dmitry Bary
On Wed, 6 Mar 2024 at 01:18, Luca Weiss wrote:
>
> Give the wifi node a generic node name 'wifi'.
>
> Signed-off-by: Luca Weiss
> ---
> arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed
> ---
> arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
> 1 file changed, 41 insertions(+)
>
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
On Mon, 29 Jan 2024 at 15:35, Abel Vesa wrote:
>
> From: Sibi Sankar
>
> The UEFI loads a lite variant of the ADSP firmware to support charging
> use cases. The kernel needs to unload and reload it with the firmware
> that has full feature support for audio. This patch arbitarily shutsdown
> the
/sdm450-motorola-ali.dts | 2 +-
arch/arm64/boot/dts/qcom/sdm450.dtsi | 14 +++
arch/arm64/boot/dts/qcom/sdm632.dtsi | 8 ++
4 files changed, 138 insertions(+), 1 deletion(-)
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
@1c48000 {
Nit: most of the platforms use the adreno_smmu label. But maybe the
msm-iommu vs arm-smmu makes difference here.
Nevertheless:
Reviewed-by: Dmitry Baryshkov
+ compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v2";
+
ss
> ---
> drivers/clk/qcom/gcc-msm8953.c | 4
> 1 file changed, 4 insertions(+)
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
Konrad Dybcio
> Signed-off-by: Luca Weiss
> ---
> arch/arm64/boot/dts/qcom/msm8953.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
On Tue, 9 Jan 2024 at 12:10, Konrad Dybcio wrote:
>
>
>
> On 1/5/24 15:54, Luca Weiss wrote:
> > Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0,
> > RFC_CAM_THERM, CAM_FLASH_THERM and QUIET_THERM thermistors connected to
> > PM6150L.
> >
> > Due to hardware constraints we can only
On Mon, 8 Jan 2024 at 16:23, Luca Weiss wrote:
>
> On Mon Jan 8, 2024 at 3:18 PM CET, Konrad Dybcio wrote:
> > On 8.01.2024 14:49, Luca Weiss wrote:
> > > When num-channels and qcom,num-ees is not provided in devicetree, the
> > > driver will try to read these values from the registers during
On Sun, 31 Dec 2023 at 16:49, Luca Weiss wrote:
>
> Convert the .txt documentation to .yaml.
>
> Take the liberty to change the compatibles for ipq8064, apq8064, msm8974
> and msm8960 to follow the updated naming schema. These compatibles are
> not used upstream yet.
>
> Also add a compatible for
On Thu, 21 Dec 2023 at 09:33, Luca Weiss wrote:
>
> On Wed Dec 20, 2023 at 1:32 PM CET, Konrad Dybcio wrote:
> > On 20.12.2023 11:02, Luca Weiss wrote:
> > > This series adds all the necessary bits to enable USB-C role switching,
> > > charger and fuel gauge (all via pmic-glink) on Fairphone 5.
>
On Wed, 20 Dec 2023 at 12:04, Luca Weiss wrote:
>
> The QCM6490 Linux Android firmware needs this workaround as well. Add it
> to the list.
>
> Signed-off-by: Luca Weiss
> ---
> drivers/usb/typec/ucsi/ucsi_glink.c | 1 +
> 1 file changed, 1 insertion(+)
Revie
On 05/12/2023 10:45, Nitin Rawat wrote:
On 12/4/2023 10:58 PM, Manivannan Sadhasivam wrote:
On Mon, Dec 04, 2023 at 01:21:42PM +0100, Luca Weiss wrote:
On Mon Dec 4, 2023 at 1:15 PM CET, Nitin Rawat wrote:
On 12/4/2023 3:54 PM, Luca Weiss wrote:
From: Nitin Rawat
Add UFS host
On Fri, 24 Nov 2023 at 14:30, Vikash Garodia wrote:
>
> On 11/24/2023 5:05 PM, Luca Weiss wrote:
> > On Fri Nov 24, 2023 at 7:38 AM CET, Vikash Garodia wrote:
> >>
> >> On 11/22/2023 7:50 PM, Luca Weiss wrote:
> >>> On Wed Nov 22, 2023 at 2:17 PM CET, Vikash Garodia wrote:
>
> On
[Added Kalle to the CC list]
On Tue, 31 Oct 2023 at 12:31, Luca Weiss wrote:
>
> On Mon Oct 30, 2023 at 8:26 PM CET, Konrad Dybcio wrote:
> > On 27.10.2023 16:20, Luca Weiss wrote:
> > > Now that the WPSS remoteproc is enabled, enable wifi so we can use it.
> > >
> > > Signed-off-by: Luca Weiss
e changed, 50 insertions(+)
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
des")
> Signed-off-by: Luca Weiss
> ---
> arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Reviewed-by: Dmitry Baryshkov
--
With best wishes
Dmitry
On Fri, 22 Sept 2023 at 19:57, Luca Weiss wrote:
>
> On Sonntag, 6. August 2023 12:47:51 CEST Luca Weiss wrote:
> > Hi Bjorn,
> >
> > On Montag, 31. Juli 2023 23:45:21 CEST Bjorn Andersson wrote:
> > > On Thu, Jun 15, 2023 at 08:20:41PM +0200, Konrad Dybcio wrote:
> > > > On 15.06.2023 20:17,
On Fri, 22 Sept 2023 at 19:56, Luca Weiss wrote:
>
> Add more busses found on msm8226 SoC.
>
> Signed-off-by: Luca Weiss
> ---
> arch/arm/boot/dts/qcom/qcom-msm8226.dtsi | 33
>
> 1 file changed, 33 insertions(+)
>
Reviewed-by: Dmitr
On Fri, 22 Sept 2023 at 19:56, Luca Weiss wrote:
>
> On GPIO22 and GPIO23 there is another I2C bus. Add the function for it.
>
> Signed-off-by: Luca Weiss
> ---
> drivers/pinctrl/qcom/pinctrl-msm8226.c | 8 ++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
&
On Thu, 1 Apr 2021 at 23:09, Rob Clark wrote:
>
> On Mon, Feb 22, 2021 at 8:06 AM Rob Clark wrote:
> >
> > On Mon, Feb 22, 2021 at 7:45 AM Akhil P Oommen
> > wrote:
> > >
> > > On 2/19/2021 9:30 PM, Rob Clark wrote:
> > > > On Fri, Feb 19, 2021 at 2:44 AM Akhil P Oommen
> > > > wrote:
> > >
On Thu, 1 Apr 2021 at 16:19, wrote:
>
> On 2021-04-01 07:37, Dmitry Baryshkov wrote:
> > On 01/04/2021 01:47, Rob Clark wrote:
> >> On Wed, Mar 31, 2021 at 9:03 AM Dmitry Baryshkov
> >> wrote:
> >>>
> >>> On 31/03/2021 14:27, Kalyan Thota wr
On 01/04/2021 01:47, Rob Clark wrote:
On Wed, Mar 31, 2021 at 9:03 AM Dmitry Baryshkov
wrote:
On 31/03/2021 14:27, Kalyan Thota wrote:
WARN_ON was introduced by the below commit to catch runtime resumes
that are getting triggered before icc path was set.
"drm/msm/disp/dpu1: icc path
On 31/03/2021 14:27, Kalyan Thota wrote:
WARN_ON was introduced by the below commit to catch runtime resumes
that are getting triggered before icc path was set.
"drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume"
For the targets where the bw scaling is not enabled, this
Add support for QMP V4 Combo USB3+DP PHY (for SM8250 platform).
Signed-off-by: Dmitry Baryshkov
Acked-by: Bjorn Andersson
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 394 ++--
drivers/phy/qualcomm/phy-qcom-qmp.h | 40 ++-
2 files changed, 412 insertions(+), 22 deletions
USB1 QMP PHY is not just a USB3 PHY, but USB3+DP PHY. Change device tree
nodes accordingly.
Signed-off-by: Dmitry Baryshkov
Reviewed-by: Bjorn Andersson
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 23 ++-
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/arch
A plenty of DP PHY registers are common between V3 and V4. To simplify
V4 code, rename all common registers.
Signed-off-by: Dmitry Baryshkov
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 50 ++---
drivers/phy/qualcomm/phy-qcom-qmp.h | 37 ++---
2 files
Add compatible for SM8250 in QMP USB3 DP PHY bindings.
Signed-off-by: Dmitry Baryshkov
Acked-by: Rob Herring
Reviewed-by: Bjorn Andersson
---
Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings
Plug dp_phy-provided clocks to display clock controller.
Signed-off-by: Dmitry Baryshkov
Reviewed-by: Bjorn Andersson
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
b/arch/arm64/boot/dts
f5df13 ("dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy
information")
Cc: Stephen Boyd
Cc: Sandeep Maheswaram
Signed-off-by: Dmitry Baryshkov
Acked-by: Rob Herring
Reviewed-by: Stephen Boyd
Reviewed-by: Bjorn Andersson
---
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
Changes since v5:
- Rebase on top of phy-next
- Rework 'move DP functions to callbacks' patch to leave most of the
code in place, using function prototypes.
Changes since v4:
- Fix typo in the qcom,sc7180-qmp-usb3-phy name in the first patch
Changes since v3:
- Move
In preparation to adding support for V4 DP PHY move DP functions to
callbacks at struct qmp_phy_cfg.
Signed-off-by: Dmitry Baryshkov
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 73 -
1 file changed, 51 insertions(+), 22 deletions(-)
diff --git a/drivers/phy/qualcomm
f5df13 ("dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy
information")
Cc: Stephen Boyd
Cc: Sandeep Maheswaram
Signed-off-by: Dmitry Baryshkov
Acked-by: Rob Herring
Reviewed-by: Stephen Boyd
Reviewed-by: Bjorn Andersson
---
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
Hello,
On 10/02/2021 03:52, Jordan Crouse wrote:
Most a6xx targets have security issues that were fixed with new versions
of the microcode(s). Make sure that we are booting with a safe version of
the microcode for the target and print a message and error if not.
v2: Add more informative error
USB1 QMP PHY is not just a USB3 PHY, but USB3+DP PHY. Change device tree
nodes accordingly.
Signed-off-by: Dmitry Baryshkov
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 23 ++-
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
Add support for QMP V4 Combo USB3+DP PHY (for SM8250 platform).
Signed-off-by: Dmitry Baryshkov
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 388 ++--
drivers/phy/qualcomm/phy-qcom-qmp.h | 40 ++-
2 files changed, 406 insertions(+), 22 deletions(-)
diff --git a/drivers
Plug dp_phy-provided clocks to display clock controller.
Signed-off-by: Dmitry Baryshkov
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index
In preparation to adding support for V4 DP PHY move DP functions to
callbacks at struct qmp_phy_cfg.
Signed-off-by: Dmitry Baryshkov
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 438 +++-
1 file changed, 231 insertions(+), 207 deletions(-)
diff --git a/drivers/phy/qualcomm
A plenty of DP PHY registers are common between V3 and V4. To simplify
V4 code, rename all common registers.
Signed-off-by: Dmitry Baryshkov
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 50 ++---
drivers/phy/qualcomm/phy-qcom-qmp.h | 37 ++---
2 files
f5df13 ("dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy
information")
Cc: Stephen Boyd
Cc: Sandeep Maheswaram
Signed-off-by: Dmitry Baryshkov
Acked-by: Rob Herring
Reviewed-by: Stephen Boyd
---
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 2 ++
Documentation/devicet
1 - 100 of 282 matches
Mail list logo