Re: [PATCH v3 3/4] dt-bindings: power: tps65217_charger: add NTC type for battery temperature measurement.

2017-05-26 23:26 GMT+02:00 Liam Breck : > Hi Enric, > > On Fri, May 26, 2017 at 4:04 AM, Enric Balletbo i Serra > wrote: >> The TS pin of the TPS56217 connects to the NTC resistor in the battery >> pack. By default the device is setup to

Re: [PATCH v3 3/4] dt-bindings: power: tps65217_charger: add NTC type for battery temperature measurement.

2017-05-26 23:26 GMT+02:00 Liam Breck : > Hi Enric, > > On Fri, May 26, 2017 at 4:04 AM, Enric Balletbo i Serra > wrote: >> The TS pin of the TPS56217 connects to the NTC resistor in the battery >> pack. By default the device is setup to support a 10-kohm but can also >> be configured to support

Re: [PATCH v3 3/4] dt-bindings: power: tps65217_charger: add NTC type for battery temperature measurement.

Hi Enric, On Fri, May 26, 2017 at 4:04 AM, Enric Balletbo i Serra wrote: > The TS pin of the TPS56217 connects to the NTC resistor in the battery > pack. By default the device is setup to support a 10-kohm but can also > be configured to support a 100-kohm. Add a

Re: [PATCH v3 3/4] dt-bindings: power: tps65217_charger: add NTC type for battery temperature measurement.

Hi Enric, On Fri, May 26, 2017 at 4:04 AM, Enric Balletbo i Serra wrote: > The TS pin of the TPS56217 connects to the NTC resistor in the battery > pack. By default the device is setup to support a 10-kohm but can also > be configured to support a 100-kohm. Add a propietry to configure the >

[PATCH v3 3/4] dt-bindings: power: tps65217_charger: add NTC type for battery temperature measurement.

The TS pin of the TPS56217 connects to the NTC resistor in the battery pack. By default the device is setup to support a 10-kohm but can also be configured to support a 100-kohm. Add a propietry to configure the connected NTC resistor. Therefore, the charger would get the wrong temperature

[PATCH v3 3/4] dt-bindings: power: tps65217_charger: add NTC type for battery temperature measurement.

The TS pin of the TPS56217 connects to the NTC resistor in the battery pack. By default the device is setup to support a 10-kohm but can also be configured to support a 100-kohm. Add a propietry to configure the connected NTC resistor. Therefore, the charger would get the wrong temperature