On Wed, Nov 28, 2012 at 12:54:46AM +, David Woodhouse wrote:
On Wed, 2012-11-28 at 00:51 +0100, Krzysztof Mazur wrote:
If you do this actually it's better to don't use patch 1/7 because
it introduces race condition that you found earlier.
Right. I've omitted that from the git tree I
On Tuesday, November 27, 2012 5:00 PM Sebastian Andrzej Siewior wrote:
On 11/27/2012 09:57 AM, Andrzej Pietrasiewicz wrote:
|mkdir -p $FABRIC/naa.6001405c3214b06a/tpgt_1
|mkdir $FABRIC/naa.6001405c3214b06a/tpgt_1/lun/lun_0
|mkdir $FABRIC/naa.6001405c3214b06a/tpgt_1/lun/lun_1
So you
On Wed, Nov 28, 2012 at 12:48:17AM +, David Woodhouse wrote:
On Tue, 2012-11-27 at 10:23 -0500, chas williams - CONTRACTOR wrote:
yes, but dont call it 8/7 since that doesnt make sense.
It made enough sense when it was a single patch appended to a thread of
7 other patches from
On 11/27/2012 05:23 PM, Michal Nazarewicz wrote:
On Tue, Nov 27 2012, Sebastian Andrzej Siewior wrote:
I don't want to push python on anyone but the removal magic is simply
straight forward: unlink the disk ports, rmdir luns, tpgt,…
How should a generic tool know what kind of actions are
Thank you all for the review and education.
Below are my current understandings and an update version. Would you
please help to review it again and give your comments?
Thanks, Zhong
Now it seems to me that it is legal to call rcu_irq_exit/enter() without
a matching rcu_irq_enter/exit() if the
On 11/28/2012 07:17 AM, Dave Chinner wrote:
On Wed, Nov 28, 2012 at 01:13:11AM +, Chris Wilson wrote:
On Wed, 28 Nov 2012 10:14:44 +1100, Dave Chinner da...@fromorbit.com wrote:
+/*
+ * XXX: (dchinner) This is one of the worst cases of shrinker abuse I've
seen.
+ *
+ * i915_gem_purge()
At 11/28/2012 12:08 PM, Jiang Liu Wrote:
On 2012-11-28 11:24, Bob Liu wrote:
On Tue, Nov 27, 2012 at 8:49 PM, Tang Chen tangc...@cn.fujitsu.com wrote:
On 11/27/2012 08:09 PM, Bob Liu wrote:
On Tue, Nov 27, 2012 at 4:29 PM, Tang Chentangc...@cn.fujitsu.com
wrote:
Hi Liu,
This feature is
On 2012-11-28 16:29, Wen Congyang wrote:
At 11/28/2012 12:08 PM, Jiang Liu Wrote:
On 2012-11-28 11:24, Bob Liu wrote:
On Tue, Nov 27, 2012 at 8:49 PM, Tang Chen tangc...@cn.fujitsu.com wrote:
On 11/27/2012 08:09 PM, Bob Liu wrote:
On Tue, Nov 27, 2012 at 4:29 PM, Tang
On 11/28/12 02:10, Ben Hutchings wrote:
On Tue, 2012-11-27 at 17:32 +, Fujinaka, Todd wrote:
Forgive me if I'm being too repetitious as I think some of this has
been mentioned in the past.
We (and by we I mean the Ethernet part and driver) can only change the
advertised availability of a
At 11/28/2012 04:28 PM, Jiang Liu Wrote:
On 2012-11-28 16:29, Wen Congyang wrote:
At 11/28/2012 12:08 PM, Jiang Liu Wrote:
On 2012-11-28 11:24, Bob Liu wrote:
On Tue, Nov 27, 2012 at 8:49 PM, Tang Chen tangc...@cn.fujitsu.com wrote:
On 11/27/2012 08:09 PM, Bob Liu wrote:
On Tue, Nov 27,
An adaptive nohz (AHZ) CPU may not do do_timer() for a while
despite being non-idle. When all other CPUs are idle, AHZ
CPUs might be using stale jiffies values. To prevent this
always keep a CPU with ticks if there is one or more AHZ
CPUs.
A new function, check_drop_timer_duty, handles the
On 2012-11-28 04:57, Mikulas Patocka wrote:
On Tue, 27 Nov 2012, Jens Axboe wrote:
On 2012-11-27 11:06, Jeff Chua wrote:
On Tue, Nov 27, 2012 at 3:38 PM, Jens Axboe ax...@kernel.dk wrote:
On 2012-11-27 06:57, Jeff Chua wrote:
On Sun, Nov 25, 2012 at 7:23 AM, Jeff Chua
On 11/28/2012 09:10 AM, Andrzej Pietrasiewicz wrote:
Here I understand it. This is to some point a limitation of the gadget
framework. We do know the number of interface that will be available
before we bind. We simply don't know the endpoint number. There are two
exceptions to what I just
Nova release do rt sobre o 3.0.53, nao sei se nao valera a pena ver o que tem
vindo a mudar, segundo este post nao sao alteracoes especificas do rt.
Abraco
Fernando
Steven Rostedt rost...@goodmis.org wrote:
Dear RT Folks,
I'm pleased to announce the 3.0.53-rt77 stable release.
This
(2012/11/27 3:47), Michal Hocko wrote:
css reference counting keeps the cgroup alive even though it has been
already removed. mem_cgroup_iter relies on this fact and takes a
reference to the returned group. The reference is then released on the
next iteration or mem_cgroup_iter_break.
On Tue, 2012-11-27 at 19:22 -0800, Christian Kujau wrote:
On Tue, 27 Nov 2012 at 19:06, Christian Kujau wrote:
the same thing[0] happened again in 3.7-rc7, after ~20h uptime:
I found the following on patchwork, but this seems to deal with powerpc64
only, while this PowerBook G4 of mine is
At Wed, 28 Nov 2012 11:45:07 +0800,
Daniel J Blueman wrote:
Hi Seth, Dave, Takashi,
If I power down the unused discrete GPU before lightdm starts by
fiddling with the sysfs file [1] in the upstart script, I see a race
manifesting as the discrete GPU's HDA controller timing out to
commands
On 11/27/2012 07:10 PM, Michael Wolf wrote:
On 11/27/2012 02:48 AM, Glauber Costa wrote:
Hi,
On 11/27/2012 12:36 AM, Michael Wolf wrote:
In the case of where you have a system that is running in a
capped or overcommitted environment the user may see steal time
being reported in accounting
(2012/11/27 3:47), Michal Hocko wrote:
mem_cgroup_iter curently relies on css-id when walking down a group
hierarchy tree. This is really awkward because the tree walk depends on
the groups creation ordering. The only guarantee is that a parent node
is visited before its children.
Example
Hi Vivien,
On 9/11/2012 5:59 AM, Vivien Didelot wrote:
Without this patch, da8xx_register_spi() registers the SPI board info,
the SPI controller, and sets its number of chipselect to the size of the
static spi_board_info array. This is bad because a SPI board info may
declare devices for
Hi all,
Seems it's a great chance to discuss about the memory hotplug feature
within this thread. So I will try to give some high level thoughts about memory
hotplug feature on x86/IA64. Any comments are welcomed!
First of all, I think usability really matters. Ideally, memory
(2012/11/27 3:47), Michal Hocko wrote:
Current implementation of mem_cgroup_iter has to consider both css and
memcg to find out whether no group has been found (css==NULL - aka the
loop is completed) and that no memcg is associated with the found node
(!memcg - aka css_tryget failed because
Hi Grant, Lars, Thierry,
On 11/26/2012 04:46 PM, Grant Likely wrote:
You're effectively asking the pwm layer to behave like a gpio (which
is completely reasonable). Having a completely separate translation node
really doesn't make sense because it is entirely a software construct.
In fact,
Hi Kent,
I have been tried the patch on your linux branch and indeed, i have an error
about tpm_continue_seftest.
What is the kernel I should use to test officially my patch? Because i saw a
lot of different version of linux kernel with the tpm_continue_seftest function.
I used this repo
Hi Dmitry,
On Tue, Nov 27, 2012 at 01:13:10PM +, Lee Jones wrote:
Now we can register the BU21013_ts touch screen when booting with
Device Tree enabled. Here we parse all the necessary components
previously expected to be passed from platform data.
I applied these 3 patches, but for
Author: Lee Jones lee.jo...@linaro.org
Date: Fri Sep 28 14:35:43 2012 +0100
Input: bu21013_ts - Add support for Device Tree booting
Now we can register the BU21013_ts touch screen when booting with
Device Tree enabled. Here we parse all the necessary components
previously
On Wednesday 28 November 2012 00:43:41 Hans J. Koch wrote:
Thanks, good catch, but why don't you simply do this:
Just a matter of personal preference. As a maintainer you can apply either
patch you want. I guess you would prefer your approach and I have no
objections to that :)
From
On Wed, 28 Nov 2012, Viresh Kumar wrote:
On 28 November 2012 01:25, Rabin Vincent ra...@rab.in wrote:
2012/11/27 Viresh Kumar viresh.ku...@linaro.org:
On 27 November 2012 14:10, Lee Jones lee.jo...@linaro.org wrote:
I haven't seen this in any of SPEAr boards i have worked on. Maybe Rabin
On Wed 28-11-12 17:47:59, KAMEZAWA Hiroyuki wrote:
(2012/11/27 3:47), Michal Hocko wrote:
[...]
+ /*
+* Even if we found a group we have to make sure it is alive.
+* css !memcg means that the groups should be skipped and
+* we should continue
Page number in some devices increases across regmap ranges since the
selector register to choose the page remains the same. So in order to
write correct page number, the start_page_num is stored in
regmap_range_cfg.
Signed-off-by: Mukund Navada nav...@ti.com
---
drivers/base/regmap/internal.h
On Tue, 27 Nov 2012 18:02:29 +
David Woodhouse dw...@infradead.org wrote:
In solos-pci at least, the ops-close() function doesn't flush all
pending skbs for this vcc before returning. So can be a tasklet
somewhere which has loaded the address of the vcc-pop function from one
of
On Wed, 2012-11-28 at 09:12 +0100, Krzysztof Mazur wrote:
On Wed, Nov 28, 2012 at 12:48:17AM +, David Woodhouse wrote:
On Tue, 2012-11-27 at 10:23 -0500, chas williams - CONTRACTOR wrote:
yes, but dont call it 8/7 since that doesnt make sense.
It made enough sense when it was a
On 11/28/2012 01:17 PM, Michal Hocko wrote:
On Wed 28-11-12 17:47:59, KAMEZAWA Hiroyuki wrote:
(2012/11/27 3:47), Michal Hocko wrote:
[...]
+ /*
+* Even if we found a group we have to make sure it is alive.
+* css !memcg means that the groups should be
On Wednesday, November 28, 2012 12:34:36 PM Ming Lei wrote:
On Wed, Nov 28, 2012 at 5:19 AM, Rafael J. Wysocki r...@sisk.pl wrote:
Please use counters instead of walking the whole path every time. Ie. in
addition to the flag add a counter to store the number of the device's
children
On Tue, 2012-11-27 at 14:23 -0800, Andrew Morton wrote:
On Fri, 23 Nov 2012 15:41:03 +0530
Ashish Jangam ashish.jan...@kpitcummins.com wrote:
On Tue, 2012-10-23 at 15:33 +0530, Ashish Jangam wrote:
Does this patch looks good?
On Thu, 2012-10-11 at 16:10 +0530, Ashish Jangam wrote:
On Tue, 2012-11-27 at 14:23 -0800, Andrew Morton wrote:
On Fri, 23 Nov 2012 15:41:03 +0530
Ashish Jangam ashish.jan...@kpitcummins.com wrote:
On Tue, 2012-10-23 at 15:33 +0530, Ashish Jangam wrote:
Does this patch looks good?
On Thu, 2012-10-11 at 16:10 +0530, Ashish Jangam wrote:
On Wednesday, November 28, 2012 03:02:18 PM Stephen Rothwell wrote:
Hi Rafael,
After merging the pm tree, today's linux-next build (x86_64 allmodconfig)
failed like this:
ERROR: devfreq_monitor_resume [drivers/devfreq/governor_simpleondemand.ko]
undefined!
ERROR: devfreq_monitor_suspend
Yes. pin of write protection is common property.
This change is good. I have some suggestion below.
Could you check it?
On Friday, November 23, 2012, Doug Anderson wrote:
The exynos code claimed wp-gpio with devm_gpio_request() but never did
anything with it. That meant that anyone using a
On Wed, Nov 28, 2012 at 02:52:57PM +0530, Mukund Navada wrote:
Page number in some devices increases across regmap ranges since the
selector register to choose the page remains the same. So in order to
write correct page number, the start_page_num is stored in
regmap_range_cfg.
I'm sorry
On Wed, Nov 28, 2012 at 1:37 AM, Hans J. Koch h...@hansjkoch.de wrote:
On Wed, Nov 28, 2012 at 01:07:26AM +0100, Cong Ding wrote:
On Wed, Nov 28, 2012 at 12:07 AM, Hans J. Koch h...@hansjkoch.de wrote:
On Tue, Nov 27, 2012 at 07:29:32PM +0200, Vitalii Demianets wrote:
Memory leak was caused
On Wed 28-11-12 13:23:57, Glauber Costa wrote:
On 11/28/2012 01:17 PM, Michal Hocko wrote:
On Wed 28-11-12 17:47:59, KAMEZAWA Hiroyuki wrote:
(2012/11/27 3:47), Michal Hocko wrote:
[...]
+ /*
+ * Even if we found a group we have to make sure it is alive.
+ *
On 11/28/2012 01:33 PM, Michal Hocko wrote:
On Wed 28-11-12 13:23:57, Glauber Costa wrote:
On 11/28/2012 01:17 PM, Michal Hocko wrote:
On Wed 28-11-12 17:47:59, KAMEZAWA Hiroyuki wrote:
(2012/11/27 3:47), Michal Hocko wrote:
[...]
+ /*
+ * Even if we found a group we have
On Wednesday 28 November 2012 02:37:50 Hans J. Koch wrote:
In other words, the case of uioinfo AND pdev-dev.of_node both being NULL
is not handled properly and will have ugly results.
Moreover, the case of (uioinfo != NULL) (pdev-dev.of_node != NULL) leads
to equally ugly results too
On Tue, Nov 27, 2012 at 10:16:28PM -0500, Steven Rostedt wrote:
On Fri, 2012-11-23 at 18:15 +0100, Lars Ellenberg wrote:
When toying around with debugfs, intentionally trying to break things,
I managed to get it into a reproducible endless loop when cleaning up.
Hi Congyang,
I think vmemmap's pgtable pages should be freed after all entries are cleared,
I have a patch to do this.
The code logic is the same as [Patch v4 09/12] memory-hotplug: remove page
table of x86_64 architecture.
How do you think about this?
Signed-off-by: Jianguo Wu
Dear Takahisa,
as replied to ticket #43176 in Bugzilla thanks a lot for your work.
Am Freitag, den 16.11.2012, 00:23 +0900 schrieb Takahisa Tanaka:
The current sp5100_tco driver only supports SP5100/SB7x0 chipset, doesn't
support SB8x0 chipset, because current sp5100_tco driver doesn't know
(Adding Thorsten to cc)
On Tue, Nov 27, 2012 at 03:48:34PM -0500, Johannes Weiner wrote:
Hi everyone,
I hope I included everybody that participated in the various threads
on kswapd getting stuck / exhibiting high CPU usage. We were looking
at at least three root causes as far as I can see,
On Wed, Nov 28, 2012 at 5:29 PM, Rafael J. Wysocki r...@sisk.pl wrote:
But it doesn't have to walk the children. Moreover, with counters it only
Yeah, I got it, it is the advantage of counter, but with extra 'int'
field introduced
in 'struct device'.
needs to walk the whole path if all
V Tue, 27 Nov 2012 15:25:35 -0600
ebied...@xmission.com (Eric W. Biederman) napsáno:
Petr Tesarik ptesa...@suse.cz writes:
To allow filtering of huge pages, makedumpfile must be able to
identify them in the dump. This can be done by checking for the
appropriate page flag, so communicate
Do not modify or load balance ARP packets passing through balance-alb
mode (wherein the ARP did not originate locally, and arrived via a bridge).
Modifying pass-through ARP replies causes an incorrect MAC address
to be placed into the ARP packet, rendering peers unable to communicate
with the
On 28/11/12 09:20, Oskar Schirmer wrote:
According to documentation bit 3:2 in register SSS_CTRL are
reserved and zero, so the setting of 0x0008 does not make much sense.
Instead, bit 4 should be set as is with power up, to reflect
routing of I2S_IN to DAC correctly.
Looks much like an off by
On Wed, Nov 28, 2012 at 09:24:09AM +, David Woodhouse wrote:
On Wed, 2012-11-28 at 09:12 +0100, Krzysztof Mazur wrote:
On Wed, Nov 28, 2012 at 12:48:17AM +, David Woodhouse wrote:
On Tue, 2012-11-27 at 10:23 -0500, chas williams - CONTRACTOR wrote:
yes, but dont call it 8/7 since
On Wed, 2012-11-28 at 09:08 +0100, Krzysztof Mazur wrote:
I think you might need also an equivalent of
[PATCH v3 3/7] pppoatm: allow assign only on a connected socket.
I'm not sure yet. In will test if I can trigger that Oops on pppoatm
without that patch. Testing vcc flags might be
According to documentation bit 3:2 in register SSS_CTRL are
reserved and zero, so the setting of 0x0008 does not make much sense.
Instead, bit 4 should be set as is with power up, to reflect
routing of I2S_IN to DAC correctly.
Looks much like an off by one error.
Signed-off-by: Oskar Schirmer
On Wednesday, November 28, 2012 11:57:19 AM Ming Lei wrote:
On Wed, Nov 28, 2012 at 5:19 AM, Rafael J. Wysocki r...@sisk.pl wrote:
On Saturday, November 24, 2012 08:59:14 PM Ming Lei wrote:
The patch introduces the flag of memalloc_noio in 'struct dev_pm_info'
to help PM core to teach mm
On Wed, Nov 28, 2012 at 09:21:37AM -, David Laight wrote:
On Tue, 27 Nov 2012 18:02:29 +
David Woodhouse dw...@infradead.org wrote:
In solos-pci at least, the ops-close() function doesn't flush all
pending skbs for this vcc before returning. So can be a tasklet
somewhere
On Wed, Nov 28, 2012 at 10:37:54AM +0100, Lars Ellenberg wrote:
Note that all but rmmod may be done as normal user,
Ok, that is not exactly correct,
I forgot about debugfs being mounted 0700 ;-)
Still...
Lars
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
On Wednesday, November 28, 2012 05:47:18 PM Ming Lei wrote:
On Wed, Nov 28, 2012 at 5:29 PM, Rafael J. Wysocki r...@sisk.pl wrote:
But it doesn't have to walk the children. Moreover, with counters it only
Yeah, I got it, it is the advantage of counter, but with extra 'int'
field
-Original Message-
From: Mark Brown [mailto:broo...@opensource.wolfsonmicro.com]
Sent: Wednesday, November 28, 2012 2:59 PM
To: Navada Kanyana, Mukund
Cc: Greg Kroah-Hartman; linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/1] regmap: Add support for continously numbered
pages
On Tue, Nov 27, 2012 at 03:19:38PM -0800, Linus Torvalds wrote:
On Tue, Nov 27, 2012 at 2:26 PM, Johannes Weiner han...@cmpxchg.org wrote:
On Tue, Nov 27, 2012 at 05:02:36PM -0500, Rik van Riel wrote:
Kswapd going crazy is certainly a large part of the problem.
However, that leaves the
According to documentation bit 3:2 in register SSS_CTRL are
reserved and zero, so the setting of 0x0008 does not make much sense.
Instead, bit 4 should be set as is with power up, to reflect
routing of I2S_IN to DAC correctly.
Looks much like an off by one error.
Signed-off-by: Oskar Schirmer
On Wed, 2012-11-28 at 10:58 +0100, Krzysztof Mazur wrote:
ok, I think that we should just drop that patch, with test_bit()
I think it's no longer an optimization.
After another cup of tea, it now uses test_and_clear_bit()... and
doesn't break the carefully crafted handling of the BLOCKED bit in
On Wed, 2012-11-28 at 11:04 +0100, Krzysztof Mazur wrote:
The -close() routine can just abort any pending rx/tx and just wait
for completion of currently running rx/tx code. That shouldn't take
long.
If it's been submitted to the hardware for DMA, it can't do that very
easily.
And if I
Hi,
with this commit:
commit c8d68e6be1c3b242f1c598595830890b65cea64a
Author: Jason Wang jasow...@redhat.com
Date: Wed Oct 31 19:46:00 2012 +
tuntap: multiqueue support
I see fork bombs from udev. It is trying to create 2048 processes. 1024
for tx, 1024 for rx. OOM killer indeed
This is an attempt to implement David Rientjes' idea of mempressure
cgroup.
The main characteristics are the same to what I've tried to add to vmevent
API:
Internally, it uses Mel Gorman's idea of scanned/reclaimed ratio for
pressure index calculation. But we don't expose the index to the
From: Manjunath Hadli manjunath.ha...@ti.com
Mauro/Greg,
The below series of patches have gone through good amount of reviews, and
agreed by Laurent, Hans and Sakari to be part of the staging tree. I am
combining
the patchs with the pull request so we can get them into the 3.8 kernel.
Please
From: Manjunath Hadli manjunath.ha...@ti.com
Add a generic video driver functionality to be used by all the vpfe
drivers for davinci SoCs. The functionality includes all the
standard v4l2 interfaces including streaming. The video node
interface can be used both as an input and output node for
From: Manjunath Hadli manjunath.ha...@ti.com
add support for dm365 IPIPEIF driver based on media framework.
The IPIPEIF is exposed as a subdev, and it supports features
like fault pixel correction, dark frame subtraction and other
necessary hardware setup.
Signed-off-by: Manjunath Hadli
From: Manjunath Hadli manjunath.ha...@ti.com
IPIPE is the hardware IP which implements the functionality
required for resizer, ipipe(colorspace converter) and
the associated hardware support. This patch implements hardware
setup including coefficient programming for various hardware
filters,
From: Manjunath Hadli manjunath.ha...@ti.com
add build infrastructure for dm365 specific modules for VPFE
capture driver.
Signed-off-by: Manjunath Hadli manjunath.ha...@ti.com
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
---
drivers/staging/media/Kconfig |2 ++
From: Manjunath Hadli manjunath.ha...@ti.com
Add documentation on the Davinci VPFE driver. Document the subdevs,
and private IOTCLs the driver implements. This patch also includes
the TODO's to fit into drivers/media/ folder.
Signed-off-by: Manjunath Hadli manjunath.ha...@ti.com
Signed-off-by:
Mel Gorman wrote on 28.11.2012 11:13:
On Tue, Nov 27, 2012 at 03:19:38PM -0800, Linus Torvalds wrote:
On Tue, Nov 27, 2012 at 2:26 PM, Johannes Weiner han...@cmpxchg.org wrote:
On Tue, Nov 27, 2012 at 05:02:36PM -0500, Rik van Riel wrote:
And the one who comes out gets to explain to me which
Hello Rafael,
On Tue, Nov 27, 2012 at 11:05:52PM +0100, Rafael J. Wysocki wrote:
static inline void dbs_timer_init(struct dbs_data *dbs_data,
- struct cpu_dbs_common_info *cdbs, unsigned int sampling_rate)
+ struct cpu_dbs_common_info *cdbs,
+
From: Manjunath Hadli manjunath.ha...@ti.com
Hi Mauro,
This patchset, was part of the DM365 capture driver series, I have split
them up and made as separate series as the capture patches will now be going
under staging and made as version V3. This patches have undergone
several reviews along
From: Manjunath Hadli manjunath.ha...@ti.com
enable PPCR, enbale ISIF out on BCR and disable all events to
get the correct operation from ISIF.
Signed-off-by: Manjunath Hadli manjunath.ha...@ti.com
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
---
drivers/media/platform/davinci/vpss.c |
From: Manjunath Hadli manjunath.ha...@ti.com
add interface functions to set sync polarity, interrupt
completion and pageframe size in vpss to be used by the main driver.
Signed-off-by: Manjunath Hadli manjunath.ha...@ti.com
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
---
From: Manjunath Hadli manjunath.ha...@ti.com
request_mem_region for VPSS_CLK_CTRL register and ioremap.
and enable clocks appropriately.
Signed-off-by: Manjunath Hadli manjunath.ha...@ti.com
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
---
drivers/media/platform/davinci/vpss.c | 14
On 11/26/2012 07:31 PM, Giuseppe CABALLARO wrote:
On 11/23/2012 10:04 AM, Byungho An wrote:
This patch changes GMAC control register (TC(Transmit
Configuration) and PS(Port Selection) bit for SGMII.
In case of SGMII, TC bit is '1' and PS bit is 0.
IMO this new support that should be
On Mon, Nov 26, 2012 at 03:10:46PM +1100, Stephen Rothwell wrote:
After merging the modules tree, today's linux-next build (x86_64
allmodconfig) failed like this:
drivers/net/wireless/iwlwifi/iwl-drv.c:1196:1: error: invalid suffix
n_disabletype__8 on integer constant
On 2012/11/24 1:50, Vasilis Liaskovitis wrote:
As discussed in https://patchwork.kernel.org/patch/1581581/
the driver core remove function needs to always succeed. This means we need
to know that the device can be successfully removed before acpi_bus_trim /
acpi_bus_hot_remove_device are
Add myself as the maintainer of the NVIDIA Tegra DRM driver.
Signed-off-by: Thierry Reding thierry.red...@avionic-design.de
---
MAINTAINERS | 8
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index f503405..27c89b3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@
On 26 November 2012 07:01, Jonghwan Choi jhbird.c...@samsung.com wrote:
TMU urgently sends active-high signal (thermal trip) to PMU,
and thermal tripping by hardware logic i.e PMU is performed.
Thermal tripping means that PMU cut off the whole power of SoC
by controlling external voltage
Hi Prabhakar,
Em Wed, 28 Nov 2012 16:12:09 +0530
Prabhakar Lad prabhakar.cse...@gmail.com escreveu:
+Introduction
+
+
+This file documents the Texas Instruments Davinci Video processing Front End
+(VPFE) driver located under drivers/media/platform/davinci. The original
driver
On Wed, Nov 28, 2012 at 10:11:05AM +, Navada Kanyana, Mukund wrote:
Fix your mailer to word wrap within paragraphs.
I'm sorry but I can't understand what this is supposed to do. The
current paging code expects pages to be numbered continuously with no
gaps. Can you please clarify?
On Tue, Nov 27, 2012 at 04:25:14PM -0500, George Spelvin wrote:
Mel Gorman mgor...@suse.de wrote:
On Mon, Nov 26, 2012 at 01:53:17PM -0500, George Spelvin wrote:
Johannes Weiner han...@cmpxchg.org wrote:
Any chance you could test with this fix instead, in addition to Dave's
accounting
I wish people wouldn't submit big patches right before the merge
window opens... :/ It's better to let it sit in linux-next for a
couple weeks so people can mess with it a bit.
regards,
dan carpenter
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a
On Wed, Nov 28, 2012 at 01:27:38PM +0800, Xiao Guangrong wrote:
On 11/18/2012 11:00 AM, Marcelo Tosatti wrote:
map gfn 4? See corrected step 7 above.
Ah, this is a real bug, and unfortunately, it exists in current
code. I will make a separate patchset to fix it. Thank you, Marcelo!
-Original Message-
From: Mark Brown [mailto:broo...@opensource.wolfsonmicro.com]
Sent: Wednesday, November 28, 2012 5:05 PM
To: Navada Kanyana, Mukund
Cc: Greg Kroah-Hartman; linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/1] regmap: Add support for continously numbered
pages
When a clock has multiple users, the WARNING on imbalance of
enable/disable may not show the guilty party since although they may
have commited the error earlier, the warning is emitted later when some
other user, presumably innocent, disables the clock.
Provide per-user clock enable/disable
On Wed, Nov 28, 2012 at 11:52:22AM +, Navada Kanyana, Mukund wrote:
static const struct regmap_range_cfg aic325x_ranges[] = {
{ .name = CONF, .range_min = 128,
.range_max = 383,
.selector_reg = 0x0,
.selector_mask = 0xff,
.selector_shift =
On Wed, 28 Nov 2012 02:55:30 +
Yangbin (Robin) robin...@huawei.com wrote:
Hi all:
I write a kernel module which make a dir and create a file in proc file
system.
I use proc_mkdir() and create_proc_entry() in init and use
remove_proc_entry() in exit.
Now I got a problem during
On Wed 28 November 2012 12:45:37 Dan Carpenter wrote:
I wish people wouldn't submit big patches right before the merge
window opens... :/ It's better to let it sit in linux-next for a
couple weeks so people can mess with it a bit.
It's been under review for quite some time now, and the main
-Original Message-
From: Mark Brown [mailto:broo...@opensource.wolfsonmicro.com]
Sent: Wednesday, November 28, 2012 5:27 PM
To: Navada Kanyana, Mukund
Cc: Greg Kroah-Hartman; linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/1] regmap: Add support for continously numbered
pages
Em Wed, 28 Nov 2012 12:56:10 +0100
Hans Verkuil hansv...@cisco.com escreveu:
On Wed 28 November 2012 12:45:37 Dan Carpenter wrote:
I wish people wouldn't submit big patches right before the merge
window opens... :/ It's better to let it sit in linux-next for a
couple weeks so people can
On Wed, Nov 28, 2012 at 12:56:10PM +0100, Hans Verkuil wrote:
On Wed 28 November 2012 12:45:37 Dan Carpenter wrote:
I wish people wouldn't submit big patches right before the merge
window opens... :/ It's better to let it sit in linux-next for a
couple weeks so people can mess with it a
On Thu, Nov 22, 2012 at 11:03:26AM +0100, Rafael J. Wysocki wrote:
On Thursday, November 22, 2012 10:43:28 AM Linus Walleij wrote:
On Wed, Nov 21, 2012 at 10:31 PM, Rafael J. Wysocki r...@sisk.pl wrote:
This patchset has been around for quite a while and went through a few
iterations,
On Wednesday, November 28, 2012 11:51:20 AM Fabio Baltieri wrote:
Hello Rafael,
Hi,
On Tue, Nov 27, 2012 at 11:05:52PM +0100, Rafael J. Wysocki wrote:
static inline void dbs_timer_init(struct dbs_data *dbs_data,
- struct cpu_dbs_common_info *cdbs, unsigned int sampling_rate)
Designware UART provides optional Component Parameter
Register that lists most of the capabilities of the UART,
including FIFO size. This uses that register to set FIFO
size for the port before registering it.
Signed-off-by: Heikki Krogerus heikki.kroge...@linux.intel.com
---
Hi,
These are mainly small changes to 8250_dw.c. The interesting patch is
probable the addition to 8250.c that would allow the drivers to
deliver their UART's capabilities when they are registering ports.
Heikki Krogerus (5):
serial: 8250: Allow drivers to deliver capabilities
serial:
Modern UARTs are able to provide information about their
capabilities such as FIFO size. This allows the drivers to
deliver this information to 8250.c when they are registering
ports.
Signed-off-by: Heikki Krogerus heikki.kroge...@linux.intel.com
---
drivers/tty/serial/8250/8250.c | 22
1 - 100 of 1640 matches
Mail list logo
