crashkernel=x@y or or =range1:size1[,range2:size2,...]@offset option may
fail to reserve the required memory region if KASLR puts kernel into the
region. To avoid this uncertainty, asking KASLR to skip the required
region.
Signed-off-by: Pingfan Liu
Cc: Thomas Gleixner
Cc: Ingo Molnar
Cc:
Beside kernel, at early boot stage, the KASLR code also needs to parse the
crashkernel=x@y or crashkernel=ramsize-range:size[,...][@offset] option,
and avoid to put randomized kernel in the region.
Extracting the parsing related routines to lib/parse_crashkernel.c, so it
will be handy included by
crashkernel=x@y or or =range1:size1[,range2:size2,...]@offset option may
fail to reserve the required memory region if KASLR puts kernel into the
region. To avoid this uncertainty, asking KASLR to skip the required
region.
And the parsing routine can be re-used at this early boot stage.
Cc:
On 28-03-19, 11:33, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki
>
> There is not reason for the minimum iowait boost value in the
> schedutil cpufreq governor to depend on the available range of CPU
> frequencies. In fact, that dependency is generally confusing,
> because it causes the
On 21.03.19 14:41, Jarkko Sakkinen wrote:
> On Tue, Mar 19, 2019 at 04:03:37PM -0700, Paul Zimmerman wrote:
>> So I bisected this down to:
>>
>> # first bad commit: [a3fbfae82b4cb3ff9928e29f34c64d0507cad874] tpm:
>> take TPM chip power gating out of tpm_transmit()
>>
>> but this doesn't revert
Add Goodix GT5663 capacitive touch controller node on
Amarula A64-Relic board.
The CTP connected to board with,
- SDA, SCK from i2c1
- GPIO-LD0 as AVDD28 supply
- PH4 gpio as interrupt pin
- PH8 gpio as reset pin
- X axis is inverted
- Y axis is inverted
Signed-off-by: Jagan Teki
---
Goodix GT911 CTP is bound with Oceanic 5205 5inMFD board.
The CTP connected to board with,
- SDA, SCK from i2c0
- GPIO-LD0 as AVDD28 supply
- PH4 gpio as interrupt pin
- PH11 gpio as reset pin
- X axis is inverted
- Y axis is inverted
Signed-off-by: Jagan Teki
---
Hi Dan,
In commit
7c33bd4e3e97 ("libnvdimm/pmem: fix a possible OOB access when read and write
pmem")
Fixes tag
Fixes: 98cc093cba1e "(block, THP: make block_device_operations.rw_page
support THP)"
has these problem(s):
- Subject does not match target commit subject
Just use
> > > > I'd have:
> > > >
> > > > *x = 1; /* A */
> > > > smp_mb__before_atomic();
> > > > r0 = xchg_relaxed(x, 2); /* B (read or write part) */
> > > >
> > > > => (A ->barrier B)
> > >
> > > Perhaps so. It wasn't clear initially how these should be treated, so
On 07.04.2019 07:03, Ronald Tschalär wrote:
> commit d6abe6df706c (drm/bridge: sil_sii8620: do not have a dependency
> of RC_CORE) changed the driver to select both RC_CORE and INPUT.
> However, this causes problems with other drivers, in particular an input
> driver that depends on
In virtualized setup, when system reboots due to warm
reset interrupt storm is seen.
Call Trace:
dump_stack+0x70/0xa5
__report_bad_irq+0x2e/0xc0
note_interrupt+0x248/0x290
? add_interrupt_randomness+0x30/0x220
handle_irq_event_percpu+0x54/0x80
handle_irq_event+0x39/0x60
On Mon 08-04-19 12:07:17, zhong jiang wrote:
> When adding the memory by probing memory block in sysfs interface, there is an
> obvious issue that we will unlock the device_hotplug_lock when fails to takes
> it.
>
> That issue was introduced in Commit 8df1d0e4a265
> ("mm/memory_hotplug: make
Hi all,
Changes since 20190405:
The kspp-gustavo tree gained a conflict against Linus' tree.
The drm tree inherited the build failure from the drm-misc tree for
which I disabled a driver.
The audit tree gained a conflict against Linus' tree.
The staging tree gained a conflict against the
On 26-03-19, 11:43, Matthias Kaehlcke wrote:
> On Mon, Mar 25, 2019 at 03:29:33PM +0800, Kyle Lin wrote:
> > Stats is updated by each policy, using the lock by stat can
> > reduce the contention.
> >
> > Signed-off-by: Kyle Lin
> > ---
> > drivers/cpufreq/cpufreq_stats.c | 15 ---
>
On Sat, Apr 6, 2019 at 12:59 PM Qian Cai wrote:
>
> The commit 510ded33e075 ("slab: implement slab_root_caches list")
> changes the name of the list node within "struct kmem_cache" from
> "list" to "root_caches_node", but leaks_show() still use the "list"
> which causes a crash when reading
Remove the "console=ttySAC..." argument from DTSes having a proper
stdout-path property. To make the code functionally equivalent, add the
serial port baud rate and parity.
Signed-off-by: Krzysztof Kozlowski
---
arch/arm/boot/dts/exynos4210-origen.dts | 4 ++--
Replacing bootargs with stdout-path property in chosen node allows using
early console by adding just 'earlycon' parameter to the kernel command
line.
Signed-off-by: Krzysztof Kozlowski
---
arch/arm/boot/dts/exynos4412-trats2.dts| 3 ++-
arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 ++-
On Sat, Apr 06, 2019 at 06:59:01PM -0400, Qian Cai wrote:
> The commit 510ded33e075 ("slab: implement slab_root_caches list")
> changes the name of the list node within "struct kmem_cache" from
> "list" to "root_caches_node", but leaks_show() still use the "list"
> which causes a crash when
The touchpad of the ASUS laptops E403NA, X540NA, X541NA are not
responsive after suspend/resume. The following error message
shows after resume.
i2c_hid i2c-ELAN1200:00: failed to reset device.
On these laptops, the touchpad interrupt is connected via a GPIO
pin which is controlled by Intel
To calculate a remaining time, we need to subtract the current time from
the expiration time. Currently, arguments of ktime_sub are swapped.
Signed-off-by: Andrei Vagin
---
kernel/time/alarmtimer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/time/alarmtimer.c
I am sorry, It is incorrect. please ignore the patch. I will resent it.
Thanks,
zhong jiang
On 2019/4/8 12:00, zhong jiang wrote:
> When adding the memory by probing memory block in sysfs interface, there is an
> obvious issue that we will unlock the device_hotplug_lock when fails to takes
>
When adding the memory by probing memory block in sysfs interface, there is an
obvious issue that we will unlock the device_hotplug_lock when fails to takes
it.
That issue was introduced in Commit 8df1d0e4a265
("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")
We should drop
On Sun, Apr 07, 2019 at 03:11:00PM -0700, Dan Williams wrote:
> On Thu, Apr 4, 2019 at 2:47 AM Robin Murphy wrote:
> >
> > On 04/04/2019 06:04, Dan Williams wrote:
> > > On Wed, Apr 3, 2019 at 9:42 PM Anshuman Khandual
> > > wrote:
> > >>
> > >>
> > >>
> > >> On 04/03/2019 07:28 PM, Robin Murphy
When adding the memory by probing memory block in sysfs interface, there is an
obvious issue that we will unlock the device_hotplug_lock when fails to takes
it.
That issue was introduced in Commit 8df1d0e4a265
("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")
We should drop
at 4:58 AM, Robert R. Howell wrote:
On 4/3/19 2:54 AM, Hans de Goede wrote:
Hi,
On 03-04-19 07:43, Kai-Heng Feng wrote:
i2c-designware-platdrv fails to work after the system restored from
hibernation:
[ 272.775692] i2c_designware 80860F41:00: Unknown Synopsys component
type: 0x
On 2019年04月06日 03:01, Thomas Gleixner wrote:
Zhao,
On Tue, 26 Mar 2019, Zhao Yakui wrote:
Vs. the Subject line: arch/x86: add the support of ACRN guest
The proper prefix for x86 is surprisingly 'x86:' not 'arch/x86:'. Also
please start the first word after the colon with an upper case
On 2019/04/08 7:13, Olof Johansson wrote:
On Tue, Apr 02, 2019 at 08:42:02PM +0900, Sugaya, Taichi wrote:
Hi,
On 2019/04/01 22:02, Sugaya, Taichi wrote:
Hi,
On 2019/04/01 20:35, Maxime Ripard wrote:
Hi,
On Mon, Apr 01, 2019 at 07:52:06PM +0900, Sugaya, Taichi wrote:
On 2019/04/01
On 2019年04月06日 03:07, Thomas Gleixner wrote:
On Tue, 26 Mar 2019, Zhao Yakui wrote:
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index d9069bb..a8f4d08 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -37,7 +37,8 @@ typedef
On 2019年04月06日 03:19, Thomas Gleixner wrote:
On Tue, 26 Mar 2019, Zhao Yakui wrote:
When acrn_hypervisor is detected, the hypercall is needed so that the
acrn guest can query/config some settings. For example: it can be used
to query the resources in hypervisor and manage the
Hi all,
Today's linux-next merge of the staging tree got a conflict in:
drivers/iio/industrialio-buffer.c
between commit:
20ea39ef9f2f ("iio: Fix scan mask selection")
from the staging.current tree and commit:
3862828a903d ("iio: buffer: Switch to bitmap_zalloc()")
from the staging
The get_user_pages_fast() may mess up the page order in @pages array,
We will get the wrong DMA results in this case.
Add more commit to clarify it.
Signed-off-by: Huang Shijie
---
lib/scatterlist.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
When CONFIG_HAVE_GENERIC_GUP is defined, the kernel will use its own
get_user_pages_fast().
In the following scenario, we will may meet the bug in the DMA case:
.
get_user_pages_fast(start,,, pages);
..
On 2019/4/8 9:52, Andy Lutomirski wrote:
> On Sun, Apr 7, 2019 at 5:38 PM Li, Aubrey wrote:
>>
>> On 2019/4/8 1:34, Andy Lutomirski wrote:
>>> On Fri, Apr 5, 2019 at 12:32 PM Thomas Gleixner wrote:
On Sun, 24 Feb 2019, Aubrey Li wrote:
> The architecture specific information
On Sun, Apr 07, 2019 at 08:47:19PM -0400, Joel Fernandes (Google) wrote:
> The SRCU for modules optimization (commit title "srcu: Allocate per-CPU
> data for DEFINE_SRCU() in modules") introduced vmlinux linker entries
> which is unused since it applies only to the built-in vmlinux. So remove
> it
On Sun, Apr 7, 2019 at 3:44 PM Thomas Gleixner wrote:
>
> On Sat, 6 Apr 2019, Andy Lutomirski wrote:
> > On Fri, Apr 5, 2019 at 8:11 AM Thomas Gleixner wrote:
> > >
> > > From: Andy Lutomirski
> > >
> > > The IRQ stack lives in percpu space, so an IRQ handler that overflows it
> > > will
On 4/7/19 9:59 PM, Tobin C. Harding wrote:
> On Sat, Apr 06, 2019 at 06:59:01PM -0400, Qian Cai wrote:
>> The commit 510ded33e075 ("slab: implement slab_root_caches list")
>> changes the name of the list node within "struct kmem_cache" from
>> "list" to "root_caches_node"
>
> Are you sure? It
Hi, Jonathan
Best Regards!
Anson Huang
> -Original Message-
> From: Jonathan Cameron [mailto:ji...@kernel.org]
> Sent: 2019年4月7日 18:40
> To: Anson Huang
> Cc: knaac...@gmx.de; l...@metafoo.de; pme...@pmeerw.net; Leonard
> Crestez ; gust...@embeddedor.com;
> mart...@posteo.de;
On Fri, 5 Apr 2019, at 01:55, Patrick Venture wrote:
> Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
>
> Signed-off-by: Patrick Venture
> Reviewed-by: Rob Herring
> ---
> Changes for v9:
> - Added missing details about syscon parent
> Changes for v8:
> - None
>
On Sat, Apr 06, 2019 at 06:59:01PM -0400, Qian Cai wrote:
> The commit 510ded33e075 ("slab: implement slab_root_caches list")
> changes the name of the list node within "struct kmem_cache" from
> "list" to "root_caches_node"
Are you sure? It looks to me like it adds a member to the
On Sun, Apr 7, 2019 at 5:38 PM Li, Aubrey wrote:
>
> On 2019/4/8 1:34, Andy Lutomirski wrote:
> > On Fri, Apr 5, 2019 at 12:32 PM Thomas Gleixner wrote:
> >>
> >> On Sun, 24 Feb 2019, Aubrey Li wrote:
> >>
> >>> The architecture specific information of the running processes could
> >>> be useful
On 五, 2019-04-05 at 20:27 +0200, Thomas Gleixner wrote:
> On Tue, 26 Feb 2019, Len Brown wrote:
>
> >
> > From: Zhang Rui
> >
> > On the new dual-die/package systems, the RAPL MSR becomes die-
> > scope.
> > Thus instead of one powercap device per physical package, now there
> > should be one
Hi all,
Today's linux-next merge of the audit tree got conflicts in:
arch/mips/kernel/ptrace.c
kernel/seccomp.c
between commit:
b35f549df1d7 ("syscalls: Remove start and number from syscall_get_arguments()
args")
from Linus' tree and commit:
16add411645c ("syscall_get_arch: add
Hi Frank,
On 8/04/19 1:05 PM, Frank Rowand wrote:
> Hi Chris,
>
> On 4/3/19 6:50 PM, Chris Packham wrote:
>> Hi,
>>
>> I'm implementing support for some modular Linux based systems using
>> device tree overlays. The code is working but it seems a little more
>> fiddly that than it should be so
On Thu, Apr 04, 2019 at 09:50:47AM -0700, Ira Weiny wrote:
> On Thu, Apr 04, 2019 at 03:23:47PM +0800, Huang Shijie wrote:
> > When CONFIG_HAVE_GENERIC_GUP is defined, the kernel will use its own
> > get_user_pages_fast().
> >
> > In the following scenario, we will may meet the bug in the DMA
On 4/3/19 7:25 PM, Chris Packham wrote:
> The return from of_overlay_fdt_apply() just indicates success or fail.
> The cookie is returned via reference.
>
> Signed-off-by: Chris Packham
> ---
> Documentation/devicetree/overlay-notes.txt | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
Hi Chris,
On 4/3/19 6:50 PM, Chris Packham wrote:
> Hi,
>
> I'm implementing support for some modular Linux based systems using
> device tree overlays. The code is working but it seems a little more
> fiddly that than it should be so I'm wondering if I'm doing it right.
Let me start by saying
On Sat, 6 Apr 2019 17:55:43 +0200
Sven Schnelle wrote:
> While implementing kprobes on PA-RISC (without kretprobes) compilation
> fails when CONFIG_KPROBE_EVENTS is enabled:
>
> kernel/trace/trace_kprobe.o: in function `trace_kprobe_create':
> kernel/trace/trace_kprobe.c:666: undefined
The SRCU for modules optimization (commit title "srcu: Allocate per-CPU
data for DEFINE_SRCU() in modules") introduced vmlinux linker entries
which is unused since it applies only to the built-in vmlinux. So remove
it to prevent any space usage due to the 8 byte alignment it added.
vmlinux.lds.h
On 2019/4/7 23:46, Alexey Dobriyan wrote:
> On Sun, Apr 07, 2019 at 09:02:38PM +0800, Li, Aubrey wrote:
>> On 2019/4/7 5:41, Alexey Dobriyan wrote:
>>> On Fri, Apr 05, 2019 at 09:32:35PM +0200, Thomas Gleixner wrote:
> +/* Add support for architecture specific output in /proc/pid/status */
The SRCU for modules optimization introduced vmlinux linker entries
which is unused since it applies only to the built-in vmlinux. So remove
it to prevent any space usage due to the 8 byte alignment it added.
Tested with SRCU torture_type and rcutorture. Put prints in module
loader to confirm it
On 2019/4/8 1:34, Andy Lutomirski wrote:
> On Fri, Apr 5, 2019 at 12:32 PM Thomas Gleixner wrote:
>>
>> On Sun, 24 Feb 2019, Aubrey Li wrote:
>>
>>> The architecture specific information of the running processes could
>>> be useful to the userland. Add support to examine process architecture
>>>
Another week, another rc. Smaller than rc3, I'm happy to say. Nothing
particularly big in here, just a number of small things all over.
And it really is all over. Drivers are about a third (networking,
block, gpu, scsi), with the rest being a mix of arch updates,
filesystem updates,
Hi Will,
On Wed, 3 Apr 2019 13:06:49 +0100
Will Deacon wrote:
> On Mon, Mar 18, 2019 at 04:59:02PM +0900, Masami Hiramatsu wrote:
> > Add regs_get_argument() which returns N th argument of the function
> > call. On arm64, it supports up to 8th argument.
> > Note that this chooses most probably
--
Dear Friend (Assalamu Alaikum),
I came across your e-mail contact prior a private search while in need of
your assistance. My name is Aisha Al-Qaddafi a single Mother and a Widow
with three Children. I am the only biological Daughter of late Libyan
President (Late Colonel Muammar Gaddafi).
On Sun, Apr 7, 2019 at 10:04 AM Kirill Smelkov wrote:
>
> Fixing regression on FUSE side is my reason to do this whole work -
> that's why I care about it the most and ask.
Yeah, we can do the actual FUSE fix, I think. Preferably through the
FUSE tree. Miklos?
Linus
The pull request you sent on Sun, 7 Apr 2019 15:50:20 -0700:
> git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git tags/armsoc-fixes
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/d8491223bc243b960ee1c4a8aa5219eca0d69acf
Thank you!
--
Deet-doot-dot, I am a
Hi Steve,
Sorry for replying late.
On Tue, 02 Apr 2019 14:29:51 -0400
Steven Rostedt wrote:
> Hi Tom,
>
> I noticed that you created an error_log file in every instance, but
> they all show the same errors. These three patches make it so that
> the errors appear in the instance directory that
The late 2017 model of the Razer Blade Stealth has a built-in USB
keyboard, but for some reason the BIOS exposes an i8042 controller with
a connected KBD port. While this fake AT Keyboard device doesn't appear
to report any events, attempting to change the state of the caps lock
LED on it from on
On Wed, Apr 03 2019, George Hilliard wrote:
> On Tue, Apr 2, 2019 at 3:45 PM Christian Lütke-Stetzkamp
> wrote:
>> There are two other larger differences that I found during my
>> work. One is that drivers/mmc/host/mtk-sd.c has much more features,
>> like voltage and clock handling and some
From: Yazen Ghannam
On legacy systems, the addresses of the MCA_MISC* registers need to be
recursively discovered based on a Block Pointer field in the registers.
On Scalable MCA systems, the register space is fixed, and particular
addresses can be derived by regular offsets for bank and
From: Yazen Ghannam
The number of MCA banks is provided per logical CPU. Historically, this
number has been the same across all CPUs, but this is not an
architectural guarantee. Future AMD systems may have MCA bank counts
that vary between logical CPUs in a system.
This issue was partially
From: Yazen Ghannam
The focus of this patchset is define and use the MCA bank structures
and bank count per logical CPU.
With the exception of patch 4, this set applies to systems in production
today.
Patch 1:
Moves the declaration of struct mce_banks[] to the only file it's used.
Patch 2:
From: Yazen Ghannam
The OS is expected to write all bits in MCA_CTL. However, only
implemented bits get set in the hardware.
Read back MCA_CTL so that the value in the hardware is saved and
reported through sysfs.
Signed-off-by: Yazen Ghannam
---
arch/x86/kernel/cpu/mce/core.c | 15
From: Yazen Ghannam
Current AMD systems have unique MCA banks per logical CPU even though
the type of the banks may all align to the same bank number. Each CPU
will have control of a set of MCA banks in the hardware and these are
not shared with other CPUs.
For example, bank 0 may be the
From: Yazen Ghannam
The struct mce_banks[] array is only used in mce/core.c so move the
definition of struct mce_bank to mce/core.c and make the array static.
Also, change the "init" field to bool type.
Signed-off-by: Yazen Ghannam
---
arch/x86/kernel/cpu/mce/core.c | 11 ++-
On Sun, Apr 7, 2019 at 3:50 PM Olof Johansson wrote:
>
> Hi Linus,
>
> The following changes since commit 79a3aaa7b82e3106be97842dedfd8429248896e6:
>
> Linux 5.1-rc3 (2019-03-31 14:39:29 -0700)
>
> are available in the git repository at:
>
>
On Sun, 2019-04-07 at 15:10 -0700, Dmitry Torokhov wrote:
> Hi Lyude,
>
> On Sun, Apr 07, 2019 at 05:37:34PM -0400, Lyude Paul wrote:
> > The late 2016 model of the Razer Blade Stealth has a built-in USB
> > keyboard, but for some reason the BIOS exposes an i8042 controller with
> > a connected
Hi!
> > Changes since v1:
> >
> > - synchronized DT label properties in DT bindings with what has been agreed
> > for the patch "ARM: dts: omap4-droid4: Update backlight dt properties"
> >
> > The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
> >
> > Linux
Hi Linus,
The following changes since commit 79a3aaa7b82e3106be97842dedfd8429248896e6:
Linux 5.1-rc3 (2019-03-31 14:39:29 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git tags/armsoc-fixes
for you to fetch changes up to
On Sat, 6 Apr 2019, Andy Lutomirski wrote:
> On Fri, Apr 5, 2019 at 8:11 AM Thomas Gleixner wrote:
> >
> > From: Andy Lutomirski
> >
> > The IRQ stack lives in percpu space, so an IRQ handler that overflows it
> > will overwrite other data structures.
> >
> > Use vmap() to remap the IRQ stack so
On Wed, Mar 13, 2019 at 10:19:16PM +0100, Arnd Bergmann wrote:
> When HOTPLUG_CPU is disabled, some fields in the smp operations
> are not available or needed:
>
> arch/arm/mach-milbeaut/platsmp.c:90:3: error: field designator 'cpu_die' does
> not refer to any field in type
> 'struct
On Sun, Apr 7, 2019 at 3:18 PM Pavel Machek wrote:
>
>
> > > > This document also states "The naming scheme above leaves scope
> > > > for further attributes should they be needed". It does not permit,
> > > > however, to redefine one of the fields to mean "location", much less
> > > > the
On Tue, Apr 02, 2019 at 08:42:02PM +0900, Sugaya, Taichi wrote:
> Hi,
>
> On 2019/04/01 22:02, Sugaya, Taichi wrote:
> > Hi,
> >
> > On 2019/04/01 20:35, Maxime Ripard wrote:
> > > Hi,
> > >
> > > On Mon, Apr 01, 2019 at 07:52:06PM +0900, Sugaya, Taichi wrote:
> > > > On 2019/04/01 18:10,
On Mon, Mar 25, 2019 at 04:50:42PM +0100, Arnd Bergmann wrote:
> clang warns about statically defined DMA masks from the DMA_BIT_MASK
> macro with length 64:
>
> arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type
> [-Werror,-Wshift-count-overflow]
>
On Mon, Mar 25, 2019 at 04:50:43PM +0100, Arnd Bergmann wrote:
> clang warns about statically defined DMA masks from the DMA_BIT_MASK
> macro with length 64:
>
> arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type
> [-Werror,-Wshift-count-overflow]
> static u64
> > > This document also states "The naming scheme above leaves scope
> > > for further attributes should they be needed". It does not permit,
> > > however, to redefine one of the fields to mean "location", much less
> > > the declaration that a devicename of "platform" shall refer to an
> > >
Hi Luca,
On Sun, Apr 07, 2019 at 05:58:41PM +0200, Luca Weiss wrote:
> Provide a simple driver for GPIO controllable vibrators.
> It will be used by the Fairphone 2.
>
> Signed-off-by: Luca Weiss
> ---
> drivers/input/misc/Kconfig | 12 ++
> drivers/input/misc/Makefile | 1 +
>
Hi!
> Changes since v1:
>
> - synchronized DT label properties in DT bindings with what has been agreed
> for the patch "ARM: dts: omap4-droid4: Update backlight dt properties"
>
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
>
> Linux 5.1-rc1 (2019-03-17
On Thu, Apr 4, 2019 at 2:47 AM Robin Murphy wrote:
>
> On 04/04/2019 06:04, Dan Williams wrote:
> > On Wed, Apr 3, 2019 at 9:42 PM Anshuman Khandual
> > wrote:
> >>
> >>
> >>
> >> On 04/03/2019 07:28 PM, Robin Murphy wrote:
> >>> [ +Dan, Jerome ]
> >>>
> >>> On 03/04/2019 05:30, Anshuman
Hi Lyude,
On Sun, Apr 07, 2019 at 05:37:34PM -0400, Lyude Paul wrote:
> The late 2016 model of the Razer Blade Stealth has a built-in USB
> keyboard, but for some reason the BIOS exposes an i8042 controller with
> a connected KBD port. While this fake AT Keyboard device doesn't appear
> to report
Hi Jacek,
On Fri, Apr 5, 2019 at 1:00 PM Jacek Anaszewski
wrote:
>
> Hi all,
>
> On 4/5/19 10:42 AM, Enric Balletbo i Serra wrote:
> > Hi,
> >
> > On 5/4/19 0:42, Guenter Roeck wrote:
> >> On Thu, Apr 4, 2019 at 3:05 PM Pavel Machek wrote:
> >>>
> >>> On Thu 2019-04-04 14:48:35, Dmitry Torokhov
On Sat, Apr 6, 2019 at 1:41 AM Pavel Machek wrote:
>
> On Fri 2019-04-05 13:15:34, Guenter Roeck wrote:
> > On Thu, Apr 04, 2019 at 11:10:08AM -0600, Nick Crews wrote:
> > > The EC is in charge of controlling the keyboard backlight on
> > > the Wilco platform. We expose a standard LED class
On Fri, Apr 05, 2019 at 12:58:53PM +1100, Tobin C. Harding wrote:
> Hi Shua,
Apologies for continually leaving off the 'h' from your name Shuah.
Tobin
The late 2016 model of the Razer Blade Stealth has a built-in USB
keyboard, but for some reason the BIOS exposes an i8042 controller with
a connected KBD port. While this fake AT Keyboard device doesn't appear
to report any events, attempting to change the state of the caps lock
LED on it from on
The Cortex-A72 supports all ARMv8 recommended events up to the
RC_ST_SPEC (0x91) event, create an appropriate JSON file for mapping
those events and update the mapfile.csv for matching the Cortex-A72 MIDR
to that file.
Signed-off-by: Florian Fainelli
---
Use .set_time instead of the deprecated .set_mmss64.
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-test.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c
index f1a6dc5ad013..b298e9902f45 100644
---
In case setup_hifcpubiuctrl_regs() returns an error, because of e.g:
an unsupported CPU type, just catch that error and return instead of
blindly continuing with the initialization. This fixes a NULL pointer
de-reference with the code continuing without having a proper array of
registers to use.
Hi all,
Today's linux-next merge of the kspp-gustavo tree got a conflict in:
arch/x86/include/asm/syscall.h
between commits:
b35f549df1d7 ("syscalls: Remove start and number from syscall_get_arguments()
args")
32d92586629a ("syscalls: Remove start and number from syscall_set_arguments()
The Tegra 20 RTC is a 32bit seconds counter (with an unused millisecond
counter).
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-tegra.c | 24 ++--
1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c
index
Call the 64bit versions of rtc_tm time conversion now that the range is
enforced by the core.
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-tegra.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c
index
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-tegra.c | 15 +--
1 file changed, 1 insertion(+), 14 deletions(-)
diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c
index e93092aa6f7d..f0ce76865434
>From the datasheet: "HW_RTC_SECONDS provides access to the 32-bit real-time
seconds counter."
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-stmp3xxx.c | 10 --
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
Use .set_time instead of the deprecated .set_mmss.
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-stmp3xxx.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
index dc0c6cc4849d..143486f69485 100644
---
Call the 64bit versions of rtc_tm time conversion now that the range is
enforced by the core.
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-stmp3xxx.c | 8 +++-
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
index
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-stmp3xxx.c | 10 +-
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
index 143486f69485..ff6488be385f
The COH 901 331 is a 32bit seconds counter.
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-coh901331.c | 15 ++-
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/rtc/rtc-coh901331.c b/drivers/rtc/rtc-coh901331.c
index 0b232c84f674..5b214db919d0 100644
---
Call the 64bit versions of rtc_tm time conversion now that the range is
enforced by the core.
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-coh901331.c | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/rtc/rtc-coh901331.c
Use .set_time instead of the deprecated .set_mmss.
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-coh901331.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/rtc/rtc-coh901331.c b/drivers/rtc/rtc-coh901331.c
index 1fd743fefe28..bc9544329419 100644
---
Use SPDX-License-Identifier instead of the custom license line.
Signed-off-by: Alexandre Belloni
---
drivers/rtc/rtc-coh901331.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/rtc/rtc-coh901331.c b/drivers/rtc/rtc-coh901331.c
index bc9544329419..4ac850837153 100644
Please see attached. It was working fine prior to installing Canon linux
drivers. CUPS disconnect maybe?
I am the only user. Local USB port. Just me. Canon D0550 image class.
Has worked fine in the past.
Deleted printer and reinstalled but no go.
thanks
JTK
Page 1 ():
1 - 100 of 187 matches
Mail list logo