On 03/30/2009 12:28 AM, Adam Baker wrote:
Add check to libv4l of the sensor orientation as reported by
VIDIOC_ENUMINPUT
Signed-off-by: Adam Bakerli...@baker-net.org.uk
Looks good, thanks. I'll apply this to my libv4l tree, as soon
as its certain that the matching kernel changes will go in to
soc-camera re-uses struct devices multiple times in calls to device_register(),
therefore it has to reset the embedded struct kobject to avoid the tried to
init an initialized object error, which then also erases its name. Now with
the transition to kobject's name for device names, we have to
-Ursprüngliche Nachricht-
Von: Igor M. Liplianin liplia...@me.by
Gesendet: 29.03.09 09:36:06
An: Mauro Chehab mche...@infradead.org
Betreff: Re: [Patch] IR support for TeVii S460 DVB-S card
[..]
http://mercurial.intuxication.org/hg/s2-liplianin/rev/c1672468ea88
Did you see my
Hi Mauro,
Please pull from http://www.linuxtv.org/hg/~hverkuil/v4l-dvb for the
following:
- cx25840: cleanup: remove intermediate 'ioctl' step
- cx18: remove intermediate 'ioctl' step
- v4l: replace 'ioctl' references in v4l i2c drivers
- tuner: remove V4L1 code from this driver.
- v4l2-subdev:
Signed-off-by: Kuninori Morimoto morimoto.kunin...@renesas.com
---
v3 - v4
o comment fix
o change edge ctrl setting order
o considered edge auto control mode and manual control mode
o add DSP auto register comment
drivers/media/video/ov772x.c | 52 ++---
On Mon, 30 Mar 2009 13:38:51 +0200
Hans Verkuil hverk...@xs4all.nl wrote:
On Monday 30 March 2009 13:31:55 Mauro Carvalho Chehab wrote:
On Sun, 29 Mar 2009 15:36:46 +0200
Hans Verkuil hverk...@xs4all.nl wrote:
Hi Mauro,
Please pull from
On 03/30/2009 12:03 PM, Hans Verkuil wrote:
What exactly do you need? If there is something missing, then it should be
added. But my guess is that you can pass such information via the s_routing
callback. That's what all other drivers that use v4l2_subdev do.
The s_routing callback looks
On Friday 20 March 2009 06:19:57 Hardik Shah wrote:
Added V4L2_CID_BG_COLOR for background color setting.
Added V4L2_CID_ROTATION for rotation setting.
Above two ioclts are indepth discussed. Posting
again with the driver usage.
V4L2 supports chroma keying added new flags for the
source
On Monday 30 March 2009 14:37:22 Alexey Klimov wrote:
Hello, Hans
On Sun, Mar 29, 2009 at 4:22 PM, Hans Verkuil hverk...@xs4all.nl wrote:
Hi Mauro,
For your information, this is the current status:
- Steve Toth tested the HVR-1800 for me, so I've posted the pull request for
the
Hi Hardik,
OK, so it took a little longer than a week. So sue me :-)
Here is the review:On Friday 20 March 2009 06:19:49 Hardik Shah wrote:
1. Updated for V4L2_CID_BG_COLOR
2. Updated for V4L2_CID_ROTATION
Both of the above are discussed in length with community
3. Updated for new flags and
On 03/26/2009 04:08 PM, Hans Verkuil wrote:
I've been working on a new framework for devices like this and almost all
i2c v4l drivers are now converted to v4l2_subdev in our v4l-dvb tree. It
will also be merged in 2.6.30. Please take a look at v4l2-framework.txt in
the v4l-dvb repository for
On Monday 30 March 2009 14:12:10 Daniel Glöckner wrote:
On 03/30/2009 12:03 PM, Hans Verkuil wrote:
What exactly do you need? If there is something missing, then it should be
added. But my guess is that you can pass such information via the s_routing
callback. That's what all other
On Monday 30 March 2009 11:56:25 Daniel Glöckner wrote:
On 03/26/2009 04:08 PM, Hans Verkuil wrote:
I've been working on a new framework for devices like this and almost
all i2c v4l drivers are now converted to v4l2_subdev in our v4l-dvb
tree. It will also be merged in 2.6.30. Please take a
Hi Hans,
-Original Message-
From: Hans Verkuil [mailto:hverk...@xs4all.nl]
Sent: Monday, March 30, 2009 6:37 PM
To: Shah, Hardik
Cc: linux-media@vger.kernel.org; linux-o...@vger.kernel.org; Jadav, Brijesh R;
Hiremath, Vaibhav
Subject: Re: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
On Thursday 26 March 2009 14:22:20 Chaithrika U S wrote:
Video Port Interface driver
Add VPIF driver for DM646x. This code be used by the display and
capture drivers.
Signed-off-by: Chaithrika U S chaithr...@ti.com
---
Applies to v4l-dvb repository
drivers/media/video/davinci/vpif.c
On Monday 30 March 2009 15:36:42 Daniel Glöckner wrote:
On 03/30/2009 02:50 PM, Hans Verkuil wrote:
On Monday 30 March 2009 14:12:10 Daniel Glöckner wrote:
- valid CRC and line number in digital blanking?
Do you really need to control these?
Not on this board..
It's a PAL/NTSC
On Mon, 30 Mar 2009, Kuninori Morimoto wrote:
Signed-off-by: Kuninori Morimoto morimoto.kunin...@renesas.com
---
v3 - v4
o comment fix
o change edge ctrl setting order
o considered edge auto control mode and manual control mode
o add DSP auto register comment
Ok, I understand more
Hi,
With reference to the mail-thread started by Sakari on Resizer driver interface,
http://marc.info/?l=linux-omapm=123628392325716w=2
I would like to bring some issues and propose changes to adapt such devices
under V4L2 framework. Sorry for delayed response on this mail-thread, actually
I
MT9M001 datasheet says, that the data is ready on the falling edge of the pixel
clock, but the driver wrongly sets the SOCAM_PCLK_SAMPLE_RISING flag. Changing
this doesn't seem to produce any visible difference, still, it is better to
comply to the datasheet.
Reported-by: Sascha Oppermann
Thanks,
Vaibhav Hiremath
-Original Message-
From: Hiremath, Vaibhav
Sent: Thursday, March 19, 2009 5:57 PM
To: linux-media@vger.kernel.org
Cc: linux-o...@vger.kernel.org; psp_vi...@list.ti.com - Video
discussion list for PSP Video team (May contain non-TIers)
Subject: [PSP_VIDEO]
Op 30 mrt 2009, om 16:34 heeft Hiremath, Vaibhav het volgende
geschreven:
Hi,
With reference to the mail-thread started by Sakari on Resizer
driver interface,
http://marc.info/?l=linux-omapm=123628392325716w=2
I would like to bring some issues and propose changes to adapt such
devices
On Sun, 29 Mar 2009, Hans Verkuil wrote:
On Sunday 29 March 2009 13:03:13 Trent Piepho wrote:
How does overlay depend on video capture in any way? It's perfectly
reasonable for a driver to support _only_ overlay and not video capture.
The zr36067 chip is only designed to support
From: Paulius Zaleckas paulius.zalec...@teltonika.lt
Signed-off-by: Paulius Zaleckas paulius.zalec...@teltonika.lt
---
arch/arm/mach-mx1/Makefile |7
arch/arm/mach-mx1/ksym_mx1.c| 20 +
arch/arm/mach-mx1/mx1_camera_fiq.S | 35 +
C/C to the right mailing list, to allow Patchwork to catch this.
Forwarded message:
Date: Mon, 30 Mar 2009 07:59:56 -0700 (PDT)
From: Dean A. d...@sensoray.com
To: video4linux-l...@redhat.com, mche...@infradead.org
Cc: e...@redhat.com, erro...@gmail.com, marcin.slus...@gmail.com
Subject: patch:
Hi Mike,
The attached patch should be queued for 2.6.29.X. It corresponds to
changeset 11098 (v4l2-common: remove incorrect MODULE test) in our v4l-dvb
tree and is part of the initial set of git patches going into 2.6.30.
Without this patch loading ivtv as a module while v4l2-common is
Hans Verkuil wrote:
Hi Mike,
The attached patch should be queued for 2.6.29.X. It corresponds to
changeset 11098 (v4l2-common: remove incorrect MODULE test) in our v4l-dvb
tree and is part of the initial set of git patches going into 2.6.30.
Without this patch loading ivtv as a module while
Michael Krufky wrote:
Hans Verkuil wrote:
Hi Mike,
The attached patch should be queued for 2.6.29.X. It corresponds to
changeset 11098 (v4l2-common: remove incorrect MODULE test) in our
v4l-dvb tree and is part of the initial set of git patches going into
2.6.30.
Without this patch
On Monday 30 March 2009 16:34:42 Hiremath, Vaibhav wrote:
Hi,
With reference to the mail-thread started by Sakari on Resizer driver
interface,
http://marc.info/?l=linux-omapm=123628392325716w=2
I would like to bring some issues and propose changes to adapt such
devices under V4L2
Michael Krufky wrote:
Mark Lord wrote:
Michael Krufky wrote:
Hans Verkuil wrote:
Hi Mike,
The attached patch should be queued for 2.6.29.X. It corresponds to
changeset 11098 (v4l2-common: remove incorrect MODULE test) in our
v4l-dvb tree and is part of the initial set of git patches going
Hello, Hans and Douglas, and others
This is review version for dsbr100 radio.
Hans, if you can a bit of free time to look and make comments it will be
very good.
I'm still confused about messages like v4l2_err and about unplugging
procedure.
I tested it with my radio device and it
On Monday 30 March 2009 19:06:28 Mark Lord wrote:
Michael Krufky wrote:
Mark Lord wrote:
Michael Krufky wrote:
Hans Verkuil wrote:
Hi Mike,
The attached patch should be queued for 2.6.29.X. It corresponds to
changeset 11098 (v4l2-common: remove incorrect MODULE test) in our
Hans Verkuil wrote:
It's best to wait a bit. Jean Delvare is working on this ir-kbd-i2c driver
right now and when he's finished it should be much easier to add this. Most
importantly you can add this new i2c address to the cx18 driver rather than
add it to the probe_bttv list, which is
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Mon Mar 30 19:00:06 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 11317:ff5430b54ac2
gcc version: gcc
hei,
Could someone please test this asap? I am still hoping I can get this
2.6.30 and there is not too much time...
http://linuxtv.org/hg/~anttip/af9015_aver_a850/
It must not be big issue anymore to get this working...
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list:
Sorry,
I was at work today.
I just downloaded the latest version.
It works a lot better than the previous one (the device_nums are correct in the
af9015.c and it seems the frontend is correctly initialized now). Here is the
/var/log/messages :
Mar 30 21:30:26 blastor kernel: [ 2829.680263]
Olivier MENUEL wrote:
Sorry,
I was at work today.
I just downloaded the latest version.
It works a lot better than the previous one (the device_nums are correct in the
af9015.c and it seems the frontend is correctly initialized now). Here is the
/var/log/messages :
Looks just correct!
I
On Sun, 29 Mar 2009, Andy Walls wrote:
On Sun, 2009-03-29 at 01:24 -0700, Trent Piepho wrote:
wait_event() should take care of this. wait_event(q, test) basically does:
for(;;) {
// point A
add_me_to_waitqueue(q);
set_current_state(TASK_UNINTERRUPTIBLE);
if (test)
From this thread:
http://www.linuxtv.org/pipermail/linux-dvb/2008-September/029432.html
It appears that progress was being made on the analog support for the
DViCO FusionHDTV7 Dual Express, but the chain of emails appears to
have stopped. I just purchased one of these devices and I was
wondering
On Mon, 30 Mar 2009, Hans Verkuil wrote:
On Thursday 26 March 2009 14:22:32 Chaithrika U S wrote:
+ /* one field is displayed configure the next
+ frame if it is available else hold on current
+ frame */
I am trying to get a MythTV setup working with a DViCO FusionHDTV7
Dual Express using Mythbuntu 8.10 and I have been able to generate a
channels.conf file using the latest v4l-dvb source code and the scan
utility that comes with the dvb-utils in Mythbuntu (the dvbscan
utility in latest dvb-apps
On Mon, Mar 30, 2009 at 5:37 PM, Dave Johansen davejohan...@gmail.com wrote:
I am trying to get a MythTV setup working with a DViCO FusionHDTV7
Dual Express using Mythbuntu 8.10 and I have been able to generate a
channels.conf file using the latest v4l-dvb source code and the scan
utility that
On Mon, Mar 30, 2009 at 5:37 PM, Dave Johansen davejohan...@gmail.com wrote:
I am trying to get a MythTV setup working with a DViCO FusionHDTV7
Dual Express using Mythbuntu 8.10 and I have been able to generate a
channels.conf file using the latest v4l-dvb source code and the scan
utility that
On Monday 30 March 2009 19:09:47 Alexey Klimov wrote:
Hello, Hans and Douglas, and others
This is review version for dsbr100 radio.
Hans, if you can a bit of free time to look and make comments it will be
very good.
I'm still confused about messages like v4l2_err and about unplugging
The DVB API guarantees that read() on a file descriptor on which
DMX_SET_FILTER has been called reads one whole section at a time
as long as the provided buffer is large enough. Is
there a corresponding guarantee for DMX_SET_PES_FILTER ie can I rely on
being able to read whole TS or PES packets
On Mon, 30 Mar 2009 23:16:09 +0200
Laurent Pinchart laurent.pinch...@skynet.be wrote:
Hi Mauro,
On Monday 30 March 2009 05:49:36 Mauro Carvalho Chehab wrote:
Hi Laurent,
On Sun, 29 Mar 2009 14:45:07 +0200
Laurent Pinchart laurent.pinch...@skynet.be wrote:
uvcvideo: Add support
Here are my tests :
http://linuxtv.org/hg/~anttip/af9015_aver_a850_2/ :
Mar 31 00:16:27 blastor kernel: [12790.692333] usb 5-4.4: new high speed USB
device using ehci_hcd and address 13
Mar 31 00:16:27 blastor kernel: [12790.788517] usb 5-4.4: configuration #1
chosen from 1 choice
Mar 31
Olivier MENUEL wrote:
Here are my tests :
http://linuxtv.org/hg/~anttip/af9015_aver_a850_2/ :
I found why kaffeine was not working : I needed to check all offset checkboxes
when scanning.
Like Thomas, I get these messages in /var/log/messages when scanning or
changing channel :
On Mon, 2009-03-30 at 13:54 -0700, Trent Piepho wrote:
On Sun, 29 Mar 2009, Andy Walls wrote:
On Sun, 2009-03-29 at 01:24 -0700, Trent Piepho wrote:
wait_event() should take care of this. wait_event(q, test) basically
does:
for(;;) {
// point A
add_me_to_waitqueue(q);
Does anyone know how to get XC5000 working for DVB-T, especially 8MHz bandwidth?
Current driver only supports ATSC with 6MHz bandwidth only.
It seems there is a trick at setting compensated RF frequency.
DVB-T 8MHz support would probably works for DMB-TH, but DMB-TH
settings is very welcome.
On Tue, Mar 31, 2009 at 10:57 AM, Devin Heitmueller
devin.heitmuel...@gmail.com wrote:
On Mon, Mar 30, 2009 at 10:47 PM, David Wong davidtlw...@gmail.com wrote:
Does anyone know how to get XC5000 working for DVB-T, especially 8MHz
bandwidth?
Current driver only supports ATSC with 6MHz
On Mon, Mar 30, 2009 at 11:39 PM, David Wong davidtlw...@gmail.com wrote:
On Tue, Mar 31, 2009 at 10:57 AM, Devin Heitmueller
devin.heitmuel...@gmail.com wrote:
On Mon, Mar 30, 2009 at 10:47 PM, David Wong davidtlw...@gmail.com wrote:
Does anyone know how to get XC5000 working for DVB-T,
On Tue, Mar 31, 2009 at 11:46 AM, Devin Heitmueller
devin.heitmuel...@gmail.com wrote:
On Mon, Mar 30, 2009 at 11:39 PM, David Wong davidtlw...@gmail.com wrote:
On Tue, Mar 31, 2009 at 10:57 AM, Devin Heitmueller
devin.heitmuel...@gmail.com wrote:
On Mon, Mar 30, 2009 at 10:47 PM, David Wong
On Mon, Mar 30, 2009 at 11:03 PM, David Wong davidtlw...@gmail.com wrote:
On Tue, Mar 31, 2009 at 11:46 AM, Devin Heitmueller
devin.heitmuel...@gmail.com wrote:
On Mon, Mar 30, 2009 at 11:39 PM, David Wong davidtlw...@gmail.com wrote:
On Tue, Mar 31, 2009 at 10:57 AM, Devin Heitmueller
On Tue, Mar 17, 2009 at 11:55 AM, David Wong davidtlw...@gmail.com wrote:
This patch contains the unified driver for Legend Silicon LGS8913 and
LGS8GL5. It should replace lgs8gl5.c in media/dvb/frontends
David T.L. Wong
David,
The questions you posed tonight on a separate thread about making
Thanks,
Vaibhav Hiremath
-Original Message-
From: Aguirre Rodriguez, Sergio Alberto
Sent: Monday, March 30, 2009 9:10 PM
To: Hiremath, Vaibhav; linux-media@vger.kernel.org
Cc: DongSoo(Nathaniel) Kim; Toivonen Tuukka.O (Nokia-D/Oulu); linux-
o...@vger.kernel.org; Nagalla, Hari;
Devin
The unified LGS8GXX driver surely work on some DMB-TH devices I have.
They are:
TECHGEAR HDTVC USB (also for MagicPro ProHDTV USB as they are the same
hardware with same USB ID)
ASUS U3100 Mini DMB-TH USB
Timothy Lee tested with this unified driver for his MagicPro ProHDTV USB too.
ASUS
56 matches
Mail list logo