On Wednesday 04 of November 2009, HoP wrote:
Hi Hermann,
Attached patch adds two optional (so, disabled by default
and therefore could not break any compatibility) features:
1, tone_control=1
When enabled, ISL6421 overrides frontend's tone control
function (fe-ops.set_tone) by
Hi. I have two S2-1600 and one NOVA-HD-S2 with a quad LNB at 1.0W
(http://www.lyngsat.com/packages/canaldigital.html) and excellent reception
on most transponders running 2.6.31.1 and dvb drivers from latest hg. I have
troubles with both cards, though.
The NOVA-HD-S2 does not lock on transponders
Zdenek Kabelac wrote:
2009/11/3 Zdenek Kabelac zdenek.kabe...@gmail.com:
2009/11/2 Soeren Moch soeren.m...@stud.uni-hannover.de:
Hi. I would be happy to hear if anyone has tried both the NOVA-TD and
the
NOVA-T. The NOVA-T has always worked perfectly here but I would
like to
know
if the
Hi Magnus,
Magnus Hörlin schrieb:
The S2-1600's are more inconsistent. They have problems tuning to 11421,
12130, 12226 and 12341 MHz. Sometimes they do and once locked, they run
forever with perfect reception. I don't understand why there's a problem
with these transponders since they tune
Hi Ales and HoP,
Em Wed, 4 Nov 2009 09:35:51 +0100
Ales Jurik aju...@quick.cz escreveu:
On Wednesday 04 of November 2009, HoP wrote:
Hi Hermann,
Attached patch adds two optional (so, disabled by default
and therefore could not break any compatibility) features:
1,
2009/11/4 Soeren Moch soeren.m...@stud.uni-hannover.de:
Zdenek Kabelac wrote:
2009/11/3 Zdenek Kabelac zdenek.kabe...@gmail.com:
2009/11/2 Soeren Moch soeren.m...@stud.uni-hannover.de:
Hi. I would be happy to hear if anyone has tried both the NOVA-TD and
the
NOVA-T. The NOVA-T has always
Thanks a lot.
Only syncing my sources every 2 months, I forgot about the
make allmodconfig
I keep
http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2.
in sync until Antti's sources have been tested, and IR support is put
in, so that these sticks can be supported from the normal kernel.
Hi Joe,
On Saturday 31 October 2009 20:27:38 Joe Perches wrote:
On Sat, 2009-10-31 at 20:10 +0100, Laurent Pinchart wrote:
On Saturday 31 October 2009 10:07:01 Mauro Carvalho Chehab wrote:
I'm assuming that those printk patches from Joe to uvc will go via your
tree, so please submit a
Hi Martin,
On Monday 02 November 2009 21:31:50 Martin Rod wrote:
Hi Laurent,
I send you output of lsusb. I think, that the uvcdriver is the latest. I
try older kernel tomorrow.
Could you please load the driver with trace=255 (modprobe uvcvideo trace=255)
or, if the driver is already
Mauro,
Please pull from http://linuxtv.org/hg/~pinchartl/uvcvideo/
for the following 4 changesets:
uvcvideo: Add support for MSI StarCam 370i webcams
uvcvideo: Ignore the FIX_BANDWIDTH for compressed video
uvcvideo: Return -EINVAL instead of -ENODEV in read()
uvcvideo: Fix compilation warning
On Wed, 2009-11-04 at 15:42 +0100, Laurent Pinchart wrote:
Andrew, could you please drop drivers-media-video-uvc-use-%pul-to-print-
uuids.patch ? I will push it through the v4l-dvb tree as I need to add
backward compatibility support.
One thing you might evaluate is how useful it is to
Now that we have moved most of the functions over to the v4l2-subdev API, only
quering and setting bus parameters are still performed using the legacy
soc-camera client API. Make the use of this API optional for mt9t031.
Signed-off-by: Guennadi Liakhovetski g.liakhovet...@gmx.de
---
On Mon, 2
Guennadi,
Thanks for the reply. I will have a chance to work on this
sometime in the next two weeks as I am pre-occupied with other
items. I will definitely try to use this version and do my
testing and let you know the result.
Will this apply cleanly to the v4l-dvb linux-next branch?
Murali
linux-media,
I previously posted this on the video4linux-list, but linux-media
seems a more appropriate place.
I am developing on the OMAP3 system using a micron/aptina mt9p031
5-megapixel imager. This CMOs imager supports full image capture
(2592x1944 pixels) or you can capture subregions
Hi,
I have Firedtv DVB-C/CI adapter and for some reason it stops working
after a while. Typically it takes something like 5 hours (which makes
debugging fun). I have vdr 1.7.9 as the dvb viewer (with xine plugin),
kernel 2.6.31 x86_64, latest v4l-dvb drivers from hg and the few
remaining patches
This series of patches provide support for the TVP7002 decoder in DM365.
Support includes:
* Inclusion of the chip in v4l2 definitions
* Definition of TVP7002 specific data structures
* Kconfig and Makefile support
This series corrects many issued pointed out by Snehaprabha Narnakaje,
On Wed, 4 Nov 2009, Karicheri, Muralidharan wrote:
Guennadi,
Thanks for the reply. I will have a chance to work on this
sometime in the next two weeks as I am pre-occupied with other
items. I will definitely try to use this version and do my
testing and let you know the result.
Will
Mauro,
There was a problem found on the final retail revisions of the
Hauppauge WinTV HVR-1150 boards. The fix for this problem is in this
merge request. I've tested this with the old revision of the board to
ensure that there are no regressions caused by this change.
I've included a merge
Hi Neil,
Interesting use case. I am thinking of doing the same for
vpfe capture drive and here is what I am thinking of doing.
1) sensor driver MT9P031 configures either full capture(2592x1944)
(No skipping or binning) and video mode (VGA or 480p or any other
resolution through skipping
2009/11/4 Marios Andreopoulos opensou...@andmarios.com:
Just a small update.
After this message of yours:
http://www.linuxtv.org/pipermail/linux-dvb/2009-October/032442.html
I tried again the v4l-dvb tree and now my card works without problems!
I don’t know what the problem was with your
On Mon, 2 Nov 2009, Karicheri, Muralidharan wrote:
@@ -301,9 +301,9 @@ static int mt9t031_set_params(struct
soc_camera_device
*icd,
ret = reg_write(client, MT9T031_WINDOW_WIDTH, rect-width - 1);
if (ret = 0)
ret = reg_write(client, MT9T031_WINDOW_HEIGHT,
-
On Tue, 3 Nov 2009, Antonio Ospite wrote:
On Mon, 05 Oct 2009 08:32:10 +0200
Stefan Herbrechtsmeier hbme...@hni.uni-paderborn.de wrote:
Antonio Ospite schrieb:
On Sun, 4 Oct 2009 00:31:24 +0200 (CEST)
Guennadi Liakhovetski g.liakhovet...@gmx.de wrote:
Anyways your patch works,
Hi Murali,
On Wed, Nov 4, 2009 at 11:31 AM, Karicheri, Muralidharan
m-kariche...@ti.com wrote:
Hi Neil,
Interesting use case. I am thinking of doing the same for
vpfe capture drive and here is what I am thinking of doing.
I started my testing with the DaVinci 6446 (using the DVEVM from TI),
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Wed Nov 4 19:00:06 CET 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 13284:b8282a1720c4
gcc version: gcc
From: Márton Németh nm...@freemail.hu
The function usb_control_msg() can return error any time so at least
warn the user if an error happens. No message is printed in case of
normal operation.
Signed-off-by: Márton Németh nm...@freemail.hu
---
diff -r e628f4381170
Guennadi Liakhovetski wrote:
On Tue, 3 Nov 2009, Valentin Longchamp wrote:
Hi Guennadi,
Valentin Longchamp wrote:
Guennadi Liakhovetski wrote:
3. to support switching inputs, significant modifications to soc_camera.c
would be required. I read Nate's argument before, that as long as clients
Replying to myself is the first sign that I need to be committed
to a mental institution. So here goes.
On Wed, 4 Nov 2009, BOUWSMA Barry wrote:
The other possibility, given that two of the four inputs to
your multiswitch work, is that the two low-band inputs have
been crossed.
Thinking
Hi Laurent,
I send you log file with trace (kernel 2.6.30.9)
I have tried this kernel (on UBNT RouterStation and OpenWrt) with results:
2.6.28.10. - camera works, I tried only snapshots (I have to use
external power for USB, without external power sometimes works,
sometimes no ...)
Hi Magnus,
Em Thu, 29 Oct 2009 14:41:15 +0100
Magnus Alm magnus@gmail.com escreveu:
Hi!
I managed to get the remote working now in both in Ubuntu 9.04 (kernel
2.6.28-16) and Ubuntu 9.10 (kernel 2.6.31-14).
There is one difference tho, in the 2.6.28-16 kernel the remote
doesn't do
On Wed, 4 Nov 2009, Guennadi Liakhovetski wrote:
On Wed, 4 Nov 2009, Karicheri, Muralidharan wrote:
Guennadi,
Thanks for the reply. I will have a chance to work on this
sometime in the next two weeks as I am pre-occupied with other
items. I will definitely try to use this version
30 matches
Mail list logo