Hi Ritesh,
Please send in the future CC to laurent.pinch...@ideasonboard.com and
linux-media@vger.kernel.org
Hi Alex,
I also started working with OMAP35x torpedo kit, I successful compile Linux
3.0 and ported on the board.
Device is booting correctly but probe function in omap3isp module
2012/5/29 Alex Gershgorin al...@meprolight.com:
Hi Ritesh,
Please send in the future CC to laurent.pinch...@ideasonboard.com and
linux-media@vger.kernel.org
Hi Alex,
I also started working with OMAP35x torpedo kit, I successful compile Linux
3.0 and ported on the board.
Device is
Hi,
On 05/28/2012 01:58 PM, Hans Verkuil wrote:
On Mon May 28 2012 13:20:47 Hans de Goede wrote:
Hi,
Looks good, the entire series is:
Acked-by: Hans de Goedehdego...@redhat.com
I was thinking that it would be a good idea to add a:
#define V4L2_TUNER_CAP_BANDS_MASK 0x001f
to
Hi,
omap3 ISP previewer block can convert a raw bayer image
into a UYVY image. Debayering coefficient are stored in
an undocumented table. In the current form, only
GRBG format are converted correctly.
However, the other CFA arrangement can be transformed
in GRBG arrangement by shifting the
Hello,
I have bought recently TurboX Hybrid TV Tuner HTT-1000, which don't work on
linux at all.
from lsusb, appears as:
Bus 001 Device 003: ID 1b80:d418 Afatech
and no other infos are available.
dmesg doesn't give any info about it.
lsusb -v gives these:
Hi Mauro et al,
updated again to include 2 gspca fixes from Jean-François Moine
Here is a bunch of fixes for gspca and a couple of fixes for
good old radio support :)
The following changes since commit abed623ca59a7d1abed6c4e7459be03e25a90a1e:
[media] radio-sf16fmi: add support for SF16-FMD
Hi,
Thanks I've added this and the sonixj fixes to my tree and send an
updated pullreq to Mauro to include these in the next round of
fixes for 3.5
Regards,
Hans
On 05/28/2012 07:04 PM, Jean-Francois Moine wrote:
The ov534 bridge is too slow to handle the sensor accesses
requested by fast
On Fri, May 25, 2012 at 08:14:47PM -0300, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Prepare the clock before enabling it.
Cc: Guennadi Liakhovetski g.liakhovet...@gmx.de
Cc: linux-media@vger.kernel.org
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
On Fri, May 25, 2012 at 08:14:48PM -0300, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Prepare the clock before enabling it.
Cc: Guennadi Liakhovetski g.liakhovet...@gmx.de
Cc: linux-media@vger.kernel.org
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
On Fri, May 25, 2012 at 08:14:49PM -0300, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Prepare the clock before enabling it.
Cc: Guennadi Liakhovetski g.liakhovet...@gmx.de
Cc: linux-media@vger.kernel.org
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
On Tue, May 29, 2012 at 10:15 AM, jean-philippe francois
jp.franc...@cynove.com wrote:
2012/5/29 Alex Gershgorin al...@meprolight.com:
Hi Ritesh,
Please send in the future CC to laurent.pinch...@ideasonboard.com and
linux-media@vger.kernel.org
Hi Alex,
I also started working with OMAP35x
Hi Enrico,
On Tuesday 29 May 2012 12:08:43 Enrico wrote:
On Tue, May 29, 2012 at 10:15 AM, jean-philippe francois wrote:
2012/5/29 Alex Gershgorin al...@meprolight.com:
Hi Ritesh,
Please send in the future CC to laurent.pinch...@ideasonboard.com and
linux-media@vger.kernel.org
Hi
On Mon, May 28, 2012 at 7:22 AM, Hans Verkuil hverk...@xs4all.nl wrote:
In practice it seems that the easiest approach is not to clean up anything in
the
disconnect, just take the lock, do the bare minimum necessary for the
disconnect,
unregister the video nodes, unlock and end with
On Tue 29 May 2012 14:05:08 Ezequiel Garcia wrote:
On Mon, May 28, 2012 at 7:22 AM, Hans Verkuil hverk...@xs4all.nl wrote:
In practice it seems that the easiest approach is not to clean up anything
in the
disconnect, just take the lock, do the bare minimum necessary for the
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date:Tue May 29 19:00:17 CEST 2012
git hash:5472d3f17845c4398c6a510b46855820920c2181
gcc version: i686-linux-gcc
Hi Jean-Philippe,
On Tuesday 29 May 2012 10:24:45 jean-philippe francois wrote:
Hi,
omap3 ISP previewer block can convert a raw bayer image into a UYVY image.
Debayering coefficient are stored in an undocumented table. In the current
form, only GRBG format are converted correctly.
This simply shows a little warning if the board does not have remote
control support. This should make it easier for users to see if they
have misconfigured their system or if the driver simply does not have
rc-support for their card (yet).
Signed-off-by: Martin Blumenstingl
This simply shows a little warning if the board does not have remote
control support. This should make it easier for users to see if they
have misconfigured their system or if the driver simply does not have
rc-support for their card (yet).
Signed-off-by: Martin Blumenstingl
The Cinergy HTC Stick HD uses the same remote control as the TerraTec
Cinergy XS products. Thus the same keymap could be re-used.
Signed-off-by: Martin Blumenstingl martin.blumensti...@googlemail.com
---
drivers/media/video/em28xx/em28xx-cards.c |1 +
1 file changed, 1 insertion(+)
diff
This simply shows a little warning if the board does not have remote
control support. This should make it easier for users to see if they
have misconfigured their system or if the driver simply does not have
rc-support for their card (yet).
Signed-off-by: Martin Blumenstingl
On Tue, May 29, 2012 at 6:08 PM, Martin Blumenstingl
martin.blumensti...@googlemail.com wrote:
This simply shows a little warning if the board does not have remote
control support. This should make it easier for users to see if they
have misconfigured their system or if the driver simply does
Hello everyone,
sorry for the first reply - I messed up the git send-email command.
This is the correct version of the patch (including my signed-off-by
and a whitespace fix).
Regards,
Martin
On Tue, May 29, 2012 at 11:19 PM, Martin Blumenstingl
martin.blumensti...@googlemail.com wrote:
The
Hello Fabio,
I can use dev_err if you want.
And sorry for sending the patch twice.
I messed up the git send-email command here - sorry for that.
Regards,
Martin
On Tue, May 29, 2012 at 11:22 PM, Fabio Estevam feste...@gmail.com wrote:
On Tue, May 29, 2012 at 6:08 PM, Martin Blumenstingl
On Tue, May 29, 2012 at 6:26 PM, Martin Blumenstingl
martin.blumensti...@googlemail.com wrote:
Hello Fabio,
I can use dev_err if you want.
Or maybe dev_warn is better since this is a warning.
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to
What would you use as the first (dev) argument for dev_*?
I simply tried using the USB-device (dev-udev-dev) there, and I
think it's less
descriptive if one removes the driver name and the board number:
usb 1-1.2: Remote control support is not available for this device.
What do you think about
Martin Bugge (marbugge marbugge at cisco.com writes:
This is a preliminary proposal for an extension to the v4l2 api.
To be discussed at the V4L2 'brainstorming' meeting in Warsaw, March 2011
Purpose: Provide basic controls for HDMI and DVI devices.
reposting the query since the
26 matches
Mail list logo