Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos +
2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
---
drivers/media/pci/bt8xx/bttv-cards.c | 9 +++------
drivers/media/pci/bt8xx/bttv-driver.c | 6 ++----
drivers/media/pci/bt8xx/bttv-i2c.c | 6 ++----
drivers/media/pci/bt8xx/bttv-input.c | 4 ++--
4 files changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/media/pci/bt8xx/bttv-cards.c
b/drivers/media/pci/bt8xx/bttv-cards.c
index 8a17cc0bfa07..4ad50f978e0e 100644
--- a/drivers/media/pci/bt8xx/bttv-cards.c
+++ b/drivers/media/pci/bt8xx/bttv-cards.c
@@ -125,10 +125,8 @@ module_param_array(remote, int, NULL, 0444);
module_param_array(audiodev, int, NULL, 0444);
module_param_array(audiomux, int, NULL, 0444);
-MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
- "[enable bug compatibility for triton1 + others]");
-MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
- "[yet another chipset flaw workaround]");
+MODULE_PARM_DESC(triton1,"set ETBF pci config bit [enable bug compatibility
for triton1 + others]");
+MODULE_PARM_DESC(vsfx,"set VSFX pci config bit [yet another chipset flaw
workaround]");
MODULE_PARM_DESC(latency,"pci latency timer");
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a
list");
MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35
MHz, 14=14 MHz)");
@@ -141,8 +139,7 @@ MODULE_PARM_DESC(audiodev, "specify audio device:\n"
"\t\t 2 = tda7432\n"
"\t\t 3 = tvaudio");
MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0)
is to use the card definition.");
-MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1
enables)"
- " [some VIA/SIS chipsets are known to have problem with
overlay]");
+MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1
enables) [some VIA/SIS chipsets are known to have problem with overlay]");
/* ----------------------------------------------------------------------- */
/* list of card IDs for bt878+ cards */
diff --git a/drivers/media/pci/bt8xx/bttv-driver.c
b/drivers/media/pci/bt8xx/bttv-driver.c
index 97b91a9f9fa9..fb4aefbcc8f8 100644
--- a/drivers/media/pci/bt8xx/bttv-driver.c
+++ b/drivers/media/pci/bt8xx/bttv-driver.c
@@ -148,8 +148,7 @@ MODULE_PARM_DESC(irq_debug, "irq handler debug messages,
default is 0 (no)");
MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
MODULE_PARM_DESC(gbuffers, "number of capture buffers. range 2-32, default 8");
MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 0x208000");
-MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default "
- "is 1 (yes) for compatibility with older applications");
+MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default is
1 (yes) for compatibility with older applications");
MODULE_PARM_DESC(automute, "mute audio on bad/missing video signal, default is
1 (yes)");
MODULE_PARM_DESC(chroma_agc, "enables the AGC of chroma signal, default is 0
(no)");
MODULE_PARM_DESC(agc_crush, "enables the luminance AGC crush, default is 1
(yes)");
@@ -3506,8 +3505,7 @@ static void bttv_irq_debug_low_latency(struct bttv *btv,
u32 rc)
(unsigned long)rc);
if (0 == (btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC)) {
- pr_notice("%d: Oh, there (temporarily?) is no input signal. "
- "Ok, then this is harmless, don't worry ;)\n",
+ pr_notice("%d: Oh, there (temporarily?) is no input signal. Ok,
then this is harmless, don't worry ;)\n",
btv->c.nr);
return;
}
diff --git a/drivers/media/pci/bt8xx/bttv-i2c.c
b/drivers/media/pci/bt8xx/bttv-i2c.c
index d43911deb617..830437471038 100644
--- a/drivers/media/pci/bt8xx/bttv-i2c.c
+++ b/drivers/media/pci/bt8xx/bttv-i2c.c
@@ -44,15 +44,13 @@ static int i2c_scan;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug, "configure i2c debug level");
module_param(i2c_hw, int, 0444);
-MODULE_PARM_DESC(i2c_hw,"force use of hardware i2c support, "
- "instead of software bitbang");
+MODULE_PARM_DESC(i2c_hw,"force use of hardware i2c support, instead of
software bitbang");
module_param(i2c_scan, int, 0444);
MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
static unsigned int i2c_udelay = 5;
module_param(i2c_udelay, int, 0444);
-MODULE_PARM_DESC(i2c_udelay,"soft i2c delay at insmod time, in usecs "
- "(should be 5 or higher). Lower value means higher bus speed.");
+MODULE_PARM_DESC(i2c_udelay,"soft i2c delay at insmod time, in usecs (should
be 5 or higher). Lower value means higher bus speed.");
/* ----------------------------------------------------------------------- */
/* I2C functions - bitbanging adapter (software i2c) */
diff --git a/drivers/media/pci/bt8xx/bttv-input.c
b/drivers/media/pci/bt8xx/bttv-input.c
index a75c53da224a..4da720e4867e 100644
--- a/drivers/media/pci/bt8xx/bttv-input.c
+++ b/drivers/media/pci/bt8xx/bttv-input.c
@@ -185,8 +185,8 @@ static u32 bttv_rc5_decode(unsigned int code)
return 0;
}
}
- dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
- "instr=%x\n", rc5, org_code, RC5_START(rc5),
+ dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, instr=%x\n",
+ rc5, org_code, RC5_START(rc5),
RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
return rc5;
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
