Hello Loic,
On Thu, Sep 06, 2018 at 10:13:53AM +0200, Loic Poulain wrote:
> On 6 September 2018 at 09:48, jacopo mondi wrote:
> > Hello Loic,
> >thanks for looking into this
> >
> > On Tue, Sep 04, 2018 at 07:22:50PM +0200, Loic Poulain wrote:
> >> Hi Jacopo,
> >>
> >> > - ret =
On 6 September 2018 at 10:48, jacopo mondi wrote:
> Hello Loic,
>
> On Thu, Sep 06, 2018 at 10:13:53AM +0200, Loic Poulain wrote:
>> On 6 September 2018 at 09:48, jacopo mondi wrote:
>> > Hello Loic,
>> >thanks for looking into this
>> >
>> > On Tue, Sep 04, 2018 at 07:22:50PM +0200, Loic
Hello Loic,
On Thu, Sep 06, 2018 at 10:13:53AM +0200, Loic Poulain wrote:
> On 6 September 2018 at 09:48, jacopo mondi wrote:
> > Hello Loic,
> >thanks for looking into this
> >
> > On Tue, Sep 04, 2018 at 07:22:50PM +0200, Loic Poulain wrote:
> >> Hi Jacopo,
> >>
> >> > - ret =
On 6 September 2018 at 09:48, jacopo mondi wrote:
> Hello Loic,
>thanks for looking into this
>
> On Tue, Sep 04, 2018 at 07:22:50PM +0200, Loic Poulain wrote:
>> Hi Jacopo,
>>
>> > - ret = ov5640_mod_reg(sensor, OV5640_REG_MIPI_CTRL00, BIT(5),
>> > -on ? 0 :
Hello Loic,
thanks for looking into this
On Tue, Sep 04, 2018 at 07:22:50PM +0200, Loic Poulain wrote:
> Hi Jacopo,
>
> > - ret = ov5640_mod_reg(sensor, OV5640_REG_MIPI_CTRL00, BIT(5),
> > -on ? 0 : BIT(5));
> > - if (ret)
> > - return ret;
Hi Jacopo,
> - ret = ov5640_mod_reg(sensor, OV5640_REG_MIPI_CTRL00, BIT(5),
> -on ? 0 : BIT(5));
> - if (ret)
> - return ret;
> - ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00,
> - on ? 0x00 : 0x70);
From: Jacopo Mondi
Rework the MIPI interface startup sequence with the following changes:
- Remove MIPI bus initialization from the initial settings blob
- At set_power(1) time power up MIPI Tx/Rx and set data and clock lanes in
LP11 during 'sleep' and 'idle' with MIPI clock in non-continuous