Hi Mauro,
sorry for bumping, but could you take a look at my
libdvbv5/dvb-vdr-format.c patch? Please give me a
short feedback / thanks a lot.
--Markus--
Am 10.03.2016 um 15:07 schrieb Markus Heiser <markus.hei...@darmarit.de>:
> Hi (Mauro),
>
> below you will find my recommended patch for the broken
> VDR format (libdvbv5/dvb-vdr-format.c).
>
> There is only one point I have a doubt: I have no ATSC
> experience (I'am in Europe/germ), so I simply added
> an "A" at the field "satellite pos.". This is what
> the w_scan tool does and this tool works fine with
> the vdr (please correct me if I'am wrong).
>
> My test-case was the same as mentioned in the first
> mail (see below). Which means, I haven't tested with
> vdr, only with mpv.
>
> Is there anyone how can take up this patch?
> ... may be Mauro, the originator of vdr support?
>
> With best regards
>
> -- M --
>
>
> diff --git a/lib/libdvbv5/dvb-vdr-format.c b/lib/libdvbv5/dvb-vdr-format.c
> index 176a927..5151ebc 100644
> --- a/lib/libdvbv5/dvb-vdr-format.c
> +++ b/lib/libdvbv5/dvb-vdr-format.c
> @@ -310,13 +310,14 @@ int dvb_write_format_vdr(const char *fname,
> fprintf(fp, "%s", entry->channel);
> if (entry->vchannel)
> fprintf(fp, ",%s", entry->vchannel);
> + fprintf(fp, ":");
>
> /*
> * Output frequency:
> * in kHz for terrestrial/cable
> * in MHz for satellite
> */
> - fprintf(fp, ":%i:", freq / 1000);
> + fprintf(fp, "%i:", freq / 1000);
>
> /* Output modulation parameters */
> fmt = &formats[i];
> @@ -350,20 +351,28 @@ int dvb_write_format_vdr(const char *fname,
>
> fprintf(fp, "%s", table->table[data]);
> }
> -
> - /* Output format type */
> - fprintf(fp, ":%s:", id);
> + fprintf(fp, ":");
>
> /*
> - * Output satellite location
> - * FIXME: probably require some adjustments to match the
> - * format expected by VDR.
> + * Output sources configuration for VDR
> + *
> + * S (satellite) xy.z (orbital position in degrees) E or W
> (east or west)
> + *
> + * FIXME: in case of ATSC we use "A", this is what w_scan
> does
> */
> - switch(delsys) {
> - case SYS_DVBS:
> - case SYS_DVBS2:
> - fprintf(fp, "%s:", entry->location);
> +
> + if (entry->location) {
> + switch(delsys) {
> + case SYS_DVBS:
> + case SYS_DVBS2:
> + fprintf(fp, "%s", entry->location); break;
> + default:
> + fprintf(fp, "%s", id); break;
> + }
> + } else {
> + fprintf(fp, "%s", id);
> }
> + fprintf(fp, ":");
>
> /* Output symbol rate */
> srate = 27500000;
> @@ -408,10 +417,16 @@ int dvb_write_format_vdr(const char *fname,
> /* Output Service ID */
> fprintf(fp, "%d:", entry->service_id);
>
> - /* Output SID, NID, TID and RID */
> - fprintf(fp, "0:0:0:");
> + /* Output Network ID */
> + fprintf(fp, "0:");
> +
> + /* Output Transport Stream ID */
> + fprintf(fp, "0:");
>
> - fprintf(fp, "\n");
> + /* Output Radio ID
> + this is the last entry, tagged bei a new line (not a colon!)
> + */
> + fprintf(fp, "0\n");
> line++;
> };
> fclose (fp);
>
>
> -- M --
>
>
> Am 09.03.2016 um 16:43 schrieb Markus Heiser <markus.hei...@darmarit.de>:
>
>> Hi,
>>
>> I tested DVBv5 tools, creating vdr channel lists. My first attemp
>> was to convert a dvbv5 channel list:
>>
>> <SNIP> -----------------------------
>> # file: test_convert_in.conf
>> #
>> # converted with: dvb-format-convert -I DVBV5 -O VDR test_convert_in.conf
>> test_convert_out.conf
>> #
>> [Das Erste HD]
>> SERVICE_ID = 10301
>> VIDEO_PID = 5101
>> AUDIO_PID = 5102 5103 5106 5108
>> PID_0b = 5172 2171
>> PID_06 = 5105 5104
>> PID_05 = 1170
>> LNB = UNIVERSAL
>> FREQUENCY = 11494000
>> INVERSION = OFF
>> SYMBOL_RATE = 22000488
>> INNER_FEC = 2/3
>> MODULATION = PSK/8
>> PILOT = ON
>> ROLLOFF = 35
>> POLARIZATION = HORIZONTAL
>> STREAM_ID = 0
>> DELIVERY_SYSTEM = DVBS2
>> <SNAP> -----------------------------
>>
>>
>> this results in a strange VDR channel (test_convert_out.conf):
>>
>>
>> <SNIP> -----------------------------
>> Das Erste
>> HD:11494:S1HC23I0M5N1O35:S:(null):22000:5101:5102,5103,5106,5108:0:0:10301:0:0:0:
>> <SNAP> -----------------------------
>>
>>
>> so I created an other (vdr) channel-file (test123.conf) to see how
>> to fix the problem:
>>
>>
>> <SNIP> -----------------------------
>> # file test123.conf
>> #
>> # tested with: mpv -v --dvbin-file=test123.conf dvb://"Das Erste HD fixed"
>> #
>> Das Erste
>> HD:11494:S1HC23I0M5N1O35:S:(null):22000:5101:5102,5103,5106,5108:0:0:10301:0:0:0:
>> #
>> # dropping "(null):" and delete last ":" fixed the problem for mpv
>> #
>> Das Erste HD
>> fixed:11494:S1HC23I0M5N1O35:S:22000:5101:5102,5103,5106,5108:0:0:10301:0:0:0
>> <SNAP> -----------------------------
>>
>>
>> refering to the VDR Wikis ...
>>
>> * LinuxTV: http://www.linuxtv.org/vdrwiki/index.php/Syntax_of_channels.conf
>> * german comunity Wiki:
>> http://www.vdr-wiki.de/wiki/index.php/Channels.conf#Parameter_ab_VDR-1.7.4
>>
>> ... there is no field at position [4] / in between "Source"
>> and "SRate" which might have a value ... I suppose the '(null):'
>> is the result of pointing to *nothing* ...
>>
>> An other mistake is the ending colon (":") at the line. It is not
>> explicit specified but adding an collon to the end of an channel
>> entry will prevent players (like mpv or mplayer) from parsing the
>> line (they will ignore these lines).
>>
>> At least: generating a channel list with
>>
>> dvbv5-scan --output-format=vdr ...
>>
>> will result in the same defective channel entry, containing
>> "(null):" and the leading collon ":".
>>
>> If I can help -- e.g. testing -- please contact me.
>>
>> Regards
>>
>> --M----
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majord...@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
