On Tue, Sep 24, 2013 at 3:03 AM, Stephen Warren swar...@wwwdotorg.org wrote:
On 09/23/2013 05:50 AM, Laurent Pinchart wrote:
On Monday 23 September 2013 08:18:52 Prabhakar Lad wrote:
On Fri, Sep 20, 2013 at 3:22 PM, Sylwester Nawrocki wrote:
On 09/20/2013 10:11 AM, Prabhakar Lad wrote:
OK I
Thanks Stephen,
On 23/09/13 21:40, Stephen Warren wrote:
On 09/19/2013 02:59 AM, Srinivas KANDAGATLA wrote:
This patch adds support to ST RC driver, which is basically a IR/UHF
receiver and transmitter. This IP (IRB) is common across all the ST
parts for settop box platforms. IRB is embedded
On Mon, Sep 23, 2013 at 10:27:06PM +0200, Sylwester Nawrocki wrote:
On 09/23/2013 06:37 PM, Oliver Schinagl wrote:
On 09/23/13 16:45, Sylwester Nawrocki wrote:
Hi,
I would like to have a short discussion on LED flash devices support
in the kernel. Currently there are two APIs: the V4L2 and
Resending using Bryan's correct email address.
On Mon, Sep 23, 2013 at 10:27:06PM +0200, Sylwester Nawrocki wrote:
On 09/23/2013 06:37 PM, Oliver Schinagl wrote:
On 09/23/13 16:45, Sylwester Nawrocki wrote:
Hi,
I would like to have a short discussion on LED flash devices support
in the
Hi,
On 09/23/2013 05:48 PM, Bartlomiej Zolnierkiewicz wrote:
Hi Tomasz,
On Monday, September 23, 2013 04:50:01 PM Tomasz Stanislawski wrote:
Hello,
May I ask what is the rationale for this patch?
To reduce a few lines of code?
This patch makes source code more generic-like and easier
On Monday 23 September 2013 15:33:10 Stephen Warren wrote:
On 09/23/2013 05:50 AM, Laurent Pinchart wrote:
On Monday 23 September 2013 08:18:52 Prabhakar Lad wrote:
On Fri, Sep 20, 2013 at 3:22 PM, Sylwester Nawrocki wrote:
On 09/20/2013 10:11 AM, Prabhakar Lad wrote:
OK I will, just send
Hi Tomasz,
On Tuesday, September 24, 2013 11:43:53 AM Tomasz Stanislawski wrote:
Hi,
On 09/23/2013 05:48 PM, Bartlomiej Zolnierkiewicz wrote:
Hi Tomasz,
On Monday, September 23, 2013 04:50:01 PM Tomasz Stanislawski wrote:
Hello,
May I ask what is the rationale for this patch?
Hi Oliver,
On Monday 23 September 2013 18:37:48 Oliver Schinagl wrote:
On 09/23/13 16:45, Sylwester Nawrocki wrote:
Hi,
I would like to have a short discussion on LED flash devices support
in the kernel. Currently there are two APIs: the V4L2 and LED class
API exposed by the kernel,
Hi Hans,
On Tuesday 10 September 2013 11:34:32 Hans Verkuil wrote:
I have collected all the ideas up to now in a V2 of the agenda.
The items are grouped by the person(s) that suggested them. As done in the
past those who suggested a topic and who will attend the mini-summit are
expected to
On Tue 24 September 2013 12:59:44 Laurent Pinchart wrote:
Hi Hans,
On Tuesday 10 September 2013 11:34:32 Hans Verkuil wrote:
I have collected all the ideas up to now in a V2 of the agenda.
The items are grouped by the person(s) that suggested them. As done in the
past those who
Hi Adam,
On Thursday 13 June 2013 17:56:47 Adam Lee wrote:
On Thu, Apr 25, 2013 at 02:33:06PM +0800, Adam Lee wrote:
On Wed, Apr 24, 2013 at 11:17:52AM +0200, Laurent Pinchart wrote:
On Wednesday 24 April 2013 15:57:19 adam@canonical.com wrote:
From: Adam Lee adam@canonical.com
On Sep 22 Govindarajulu Varadarajan wrote:
Signed-off-by: Govindarajulu Varadarajan govindarajul...@gmail.com
---
drivers/media/firewire/firedtv-avc.c | 41
1 file changed, 41 deletions(-)
diff --git a/drivers/media/firewire/firedtv-avc.c
On 09/23/2013 07:44 PM, Joe Perches wrote:
On Mon, 2013-09-23 at 17:48 +0200, Bartlomiej Zolnierkiewicz wrote:
On Monday, September 23, 2013 04:50:01 PM Tomasz Stanislawski wrote:
May I ask what is the rationale for this patch?
To reduce a few lines of code?
This patch makes source code more
On Thu 12 September 2013 12:19:29 Sylwester Nawrocki wrote:
Hi Hans,
On 09/11/2013 04:01 PM, Hans Verkuil wrote:
On 09/11/2013 03:07 PM, Sylwester Nawrocki wrote:
On 09/09/2013 11:07 AM, Hans Verkuil wrote:
On 09/06/2013 12:33 AM, Sylwester Nawrocki wrote:
On 08/07/2013 07:49 PM, Hans
Em Tue, 24 Sep 2013 12:33:34 +0200
Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com escreveu:
Hi Tomasz,
On Tuesday, September 24, 2013 11:43:53 AM Tomasz Stanislawski wrote:
Hi,
On 09/23/2013 05:48 PM, Bartlomiej Zolnierkiewicz wrote:
Hi Tomasz,
On Monday, September
The following patches add ADV7611/ADV7612 HDMI receiver I2C driver
and add RCAR H2 SOC support along with ADV761x output format support
to rcar_vin soc_camera driver.
These changes are needed for SH-Mobile R8A7790 Lager board
video input support.
Valentine Barshak (3):
media: i2c: Add ADV761X
This adds ADV7611/ADV7612 Dual Port Xpressview
225 MHz HDMI Receiver support.
The code is based on the ADV7604 driver, and ADV7612 patch
by Shinobu Uehara shinobu.uehara...@renesas.com
Signed-off-by: Valentine Barshak valentine.bars...@cogentembedded.com
---
drivers/media/i2c/Kconfig | 11 +
Signed-off-by: Valentine Barshak valentine.bars...@cogentembedded.com
---
drivers/media/platform/soc_camera/rcar_vin.c | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/soc_camera/rcar_vin.c
b/drivers/media/platform/soc_camera/rcar_vin.c
index
This adds V4L2_MBUS_FMT_RGB888_1X24 input format support
which is used by the ADV7612 chip.
Signed-off-by: Valentine Barshak valentine.bars...@cogentembedded.com
---
drivers/media/platform/soc_camera/rcar_vin.c | 12 ++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git
Hi Valentine,
On Tue 24 September 2013 15:38:34 Valentine Barshak wrote:
This adds ADV7611/ADV7612 Dual Port Xpressview
225 MHz HDMI Receiver support.
The code is based on the ADV7604 driver, and ADV7612 patch
by Shinobu Uehara shinobu.uehara...@renesas.com
Thanks for the patch!
I have a
Hi Laurent,
This is my MIPI DSI bus implementation. The patchset
contains also two drivers:
- DSI bus master driver for Exynos,
- DSI slave driver for s6e8aa0 panel family.
All code has been tested on real device - Exynos 4210 based 'Trats'.
This is not final version, there are still some things
This patch adds mipi-dsi-bus master driver for Exynos chipset family.
Signed-off-by: Tomasz Figa t.f...@samsung.com
Signed-off-by: Donghwa Lee dh09@samsung.com
Signed-off-by: Sylwester Nawrocki s.nawro...@samsung.com
Signed-off-by: Andrzej Hajda a.ha...@samsung.com
Signed-off-by: Kyungmin
The patch adds mipi-dsi-bus slave driver for
s6e8aa0 familiy panels.
Signed-off-by: Donghwa Lee dh09@samsung.com
Signed-off-by: Inki Dae inki@samsung.com
Signed-off-by: Joongmock Shin jmock.s...@samsung.com
Signed-off-by: Eunchul Kim chulspro@samsung.com
Signed-off-by: Tomasz Figa
MIPI DSI is a high-speed serial interface to transmit
data from/to host to display module.
Signed-off-by: Andrzej Hajda a.ha...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/video/display/Kconfig| 4 +
drivers/video/display/Makefile | 1 +
The patch adds mipi-dsi-exynos bus master node
and s6e8aa0 panel subnode to trats device.
Signed-off-by: Andrzej Hajda a.ha...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Conflicts:
arch/arm/boot/dts/exynos4210-trats.dts
---
arch/arm/boot/dts/exynos4210-trats.dts
Hi Tomasz,
On Tuesday, September 24, 2013 02:52:44 PM Tomasz Stanislawski wrote:
On 09/23/2013 07:44 PM, Joe Perches wrote:
On Mon, 2013-09-23 at 17:48 +0200, Bartlomiej Zolnierkiewicz wrote:
On Monday, September 23, 2013 04:50:01 PM Tomasz Stanislawski wrote:
May I ask what is the
On Tue, Sep 24, 2013 at 11:44:57AM +0200, Laurent Pinchart wrote:
On Monday 23 September 2013 15:33:10 Stephen Warren wrote:
So I think you want to make the supply properties mandatory in DT (since
some form of supply is mandatory in HW), yet make the driver support
broken DTs which don't
Hi Valentine,
On Tue, 24 Sep 2013, Valentine Barshak wrote:
This adds ADV7611/ADV7612 Dual Port Xpressview
225 MHz HDMI Receiver support.
The code is based on the ADV7604 driver, and ADV7612 patch
by Shinobu Uehara shinobu.uehara...@renesas.com
Signed-off-by: Valentine Barshak
On Mon, Sep 23, 2013 at 01:50:51PM +0200, Laurent Pinchart wrote:
Isn't regulator_get_optional() intended for devices that can have supplies
unconnected in normal use ? The ADV7343 supplies are mandatory from a
hardware
point of view, so I think we should use regulator_get(). Otherwise the
On Tue, Sep 24, 2013 at 4:34 AM, Laurent Pinchart
laurent.pinch...@ideasonboard.com wrote:
I've discussed this issue during LPC last week, and I still believe we should
enable auto-suspend. The feature really saves power, without it my C910
Logitech webcam gets hot even when unused.
If we
On Tue, 24 Sep 2013, Valentine Barshak wrote:
This adds V4L2_MBUS_FMT_RGB888_1X24 input format support
which is used by the ADV7612 chip.
Signed-off-by: Valentine Barshak valentine.bars...@cogentembedded.com
---
drivers/media/platform/soc_camera/rcar_vin.c | 12 ++--
1 file
Hi Valentine,
Since patches 2 and 3 here are for soc-camera, I can offer to take all 3
via my tree after all comments to patch 1/3 are addressed and someone
(Laurent?) has acked it. Alternatively I can ack the two patches and let
all 3 go via another tree, or we can split this series too - no
Hi Hans
On Tue, 24 Sep 2013, Hans Verkuil wrote:
Shouldn't the interrupt_service_routine() op be implemented as well?
Usually these drivers will generate interrupts if e.g. the format changes.
Should it? AFAIU, .interrupt_service_routine() is a subde operation to be
called by a bridge
On Tue, 2013-09-24 at 14:52 +0200, Tomasz Stanislawski wrote:
On 09/23/2013 07:44 PM, Joe Perches wrote:
On Mon, 2013-09-23 at 17:48 +0200, Bartlomiej Zolnierkiewicz wrote:
On Monday, September 23, 2013 04:50:01 PM Tomasz Stanislawski wrote:
May I ask what is the rationale for this patch?
On 09/24/2013 06:19 PM, Guennadi Liakhovetski wrote:
Hi Hans
On Tue, 24 Sep 2013, Hans Verkuil wrote:
Shouldn't the interrupt_service_routine() op be implemented as well?
Usually these drivers will generate interrupts if e.g. the format changes.
Should it? AFAIU,
Hans Verkuil hverk...@xs4all.nl wrote:
On 09/24/2013 06:19 PM, Guennadi Liakhovetski wrote:
Hi Hans
On Tue, 24 Sep 2013, Hans Verkuil wrote:
Shouldn't the interrupt_service_routine() op be implemented as well?
Usually these drivers will generate interrupts if e.g. the format
changes.
The marvell-ccic does several things wrong or ineffectively in the clock
handling and it's usage of the devm_* stuff
- it assumes clk_get doesn't return NULL
- it explicitly calls devm_clk_put instead just keeping the reference
during it's lifetime and let the driver core call it
- it calls
The marvell-ccic does several things wrong or ineffectively in the clock
handling and it's usage of the devm_* stuff
- it assumes clk_get doesn't return NULL
- it explicitly calls devm_clk_put instead just keeping the reference
during it's lifetime and let the driver core call it
- it calls
On 09/24/2013 02:08 AM, Srinivas KANDAGATLA wrote:
Thanks Stephen,
On 23/09/13 21:40, Stephen Warren wrote:
On 09/19/2013 02:59 AM, Srinivas KANDAGATLA wrote:
This patch adds support to ST RC driver, which is basically a IR/UHF
receiver and transmitter. This IP (IRB) is common across all the
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Wed Sep 25 04:00:48 CEST 2013
git branch: test
git hash: ffee921033e64edf8579a3b21c7f15d1a6c3ef71
gcc
On 17.08.2013 13:30, Ulf wrote:
Hi,
I know the topic Hauppauge HVR-900 HD and HVR 930C-HD with si2165 demodulator
was already discussed
http://permalink.gmane.org/gmane.linux.drivers.video-input-infrastructure/40982
and
41 matches
Mail list logo