Hi,
On Fri, Mar 15, 2013 at 11:36:00AM +0530, Vivek Gautam wrote:
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare
calls as required by common clock framework.
Signed-off-by: Vivek Gautam gautam.vi...@samsung.com
CC: Felipe Balbi ba...@ti.com
CC: Kukjin Kim
On Wednesday 20 February 2013 08:57 PM, Santosh Shilimkar wrote:
From: Rajendra Nayak rna...@ti.com
OMAP5 does not have freqsel either, so add the missing
checks for !soc_is_omap54xx()
Reported-by: Archit Taneja arc...@ti.com
Signed-off-by: Rajendra Nayak rna...@ti.com
---
This patch converts the drivers to use the
module_platform_driver_probe() macro which makes the code smaller and
a bit simpler.
Signed-off-by: Fabio Porcedda fabio.porce...@gmail.com
Cc: Florian Tobias Schandinat florianschandi...@gmx.de
Cc: Nicolas Ferre nicolas.fe...@atmel.com
Cc: Tomi
Hi Tony,
On 03/12/2013 05:57 PM, Tony Lindgren wrote:
Sorry looks like this got missed. I suggest Peter collects the twl
patches and then provides me + mfd + asoc and whoever needs the
pull requests.
OK. Lets get things going forward. I have sent a pull request for you with
this patch.
--
On 03/14/2013 06:54 PM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [130314 08:45]:
OK. Let me know how the below patch looks. After that, the board code
will look like.
static struct usbhs_phy_data phy_data[] = {
{
.reset_gpio = 147,
.vcc_gpio = 148
On 03/15/2013 10:00 AM, Fabio Porcedda :
This patch converts the drivers to use the
module_platform_driver_probe() macro which makes the code smaller and
a bit simpler.
Signed-off-by: Fabio Porcedda fabio.porce...@gmail.com
Cc: Florian Tobias Schandinat florianschandi...@gmx.de
Cc: Nicolas
On Fri, Mar 15, 2013 at 10:28 AM, Nicolas Ferre nicolas.fe...@atmel.com wrote:
On 03/15/2013 10:00 AM, Fabio Porcedda :
This patch converts the drivers to use the
module_platform_driver_probe() macro which makes the code smaller and
a bit simpler.
Signed-off-by: Fabio Porcedda
Benoit,
On Wednesday 20 February 2013 09:08 PM, Santosh Shilimkar wrote:
Few updates for OMAP5 found during testing OMAP5 DT builds. Couple
of patches were already posted on the list. The series also contains
a patch which adds DMA request, IRQ lines and IO address space
DT extraction
Hi Kishon,
On 03/13/2013 10:11 AM, kishon wrote:
Benoit,
Will you be queuing this patch series?
I'm reviewing them right now.
Regards,
Benoit
Thanks
Kishon
On Thursday 07 March 2013 07:05 PM, Kishon Vijay Abraham I wrote:
Hi Benoit,
Here are the dt data patches to get usb device
On 3/13/2013 12:21 PM, Vishwanathrao Badarkhe, Manish wrote:
From: Vishwanathrao Badarkhe, Manish manish...@ti.com
Update the code to use devm_* API so that driver
core will manage resources.
Signed-off-by: Vishwanathrao Badarkhe, Manish manish...@ti.com
Tested on DA850 EVM.
Tested-by:
Apologies for the long email ...
Following on from another thread, I have encountered an issue with crc32 within
the mtd system, seemingly only on my AM335x cpu board.
In function ubi_eba_atomic_leb_change() in drivers/mtd/ubi/eba.c, there is a
call
to crc32.
During a remount of my ubifs
On Fri, Mar 8, 2013 at 12:14 AM, Jon Hunter jon-hun...@ti.com wrote:
On 03/02/2013 02:05 PM, Grant Likely wrote:
On Tue, 26 Feb 2013 17:01:22 -0600, Jon Hunter jon-hun...@ti.com wrote:
On 02/26/2013 04:44 PM, Stephen Warren wrote:
On 02/26/2013 03:40 PM, Jon Hunter wrote:
On 02/26/2013
On Thu, Mar 14, 2013 at 5:48 PM, Felipe Balbi ba...@ti.com wrote:
On Thu, Mar 14, 2013 at 11:53:57AM +0530, Kishon Vijay Abraham I wrote:
Used devres APIs devm_request_threaded_irq and devm_regulator_get for
requesting irq and for getting regulator respectively.
Signed-off-by: Kishon Vijay
On Fri, Mar 15, 2013 at 02:00:33PM +0200, Grazvydas Ignotas wrote:
On Thu, Mar 14, 2013 at 5:48 PM, Felipe Balbi ba...@ti.com wrote:
On Thu, Mar 14, 2013 at 11:53:57AM +0530, Kishon Vijay Abraham I wrote:
Used devres APIs devm_request_threaded_irq and devm_regulator_get for
requesting irq
On Mon, Mar 4, 2013 at 9:56 PM, Javier Martinez Canillas
javier.marti...@collabora.co.uk wrote:
The binding documentation for the OMAP GPIO controller has the description
for the #interrupt-cells property after the interrupt-controller.
This is confusing so is better to move the
On Thursday 14 March 2013 10:36 PM, Tony Lindgren wrote:
* Rajendra Nayak rna...@ti.com [130314 05:44]:
OMAP clock inits happen quite early, even before the slab is available.
As part of the clock init, the common clock core tries to cache parent
pointers (if not passed by the caller
Hi Fabio,
Thank you for the patch.
On Friday 15 March 2013 10:00:19 Fabio Porcedda wrote:
This patch converts the drivers to use the
module_platform_driver_probe() macro which makes the code smaller and
a bit simpler.
Signed-off-by: Fabio Porcedda fabio.porce...@gmail.com
Cc: Florian
+ Jon
Hi Kishon,
On 03/07/2013 02:35 PM, Kishon Vijay Abraham I wrote:
Hi Benoit,
Here are the dt data patches to get usb device functional in OMAP platforms.
All the patches deal with modifying arch/arm/boot except one which modifies
Documentation/../usb/omap-usb.txt
Changes from v2:
Hi Santosh,
On 03/15/2013 11:24 AM, Santosh Shilimkar wrote:
Benoit,
On Wednesday 20 February 2013 09:08 PM, Santosh Shilimkar wrote:
Few updates for OMAP5 found during testing OMAP5 DT builds. Couple
of patches were already posted on the list. The series also contains
a patch which adds
On Fri, Mar 15, 2013 at 1:37 PM, Laurent Pinchart
laurent.pinch...@ideasonboard.com wrote:
Hi Fabio,
Thank you for the patch.
On Friday 15 March 2013 10:00:19 Fabio Porcedda wrote:
This patch converts the drivers to use the
module_platform_driver_probe() macro which makes the code smaller
On Friday 15 March 2013 06:15 PM, Benoit Cousson wrote:
Hi Santosh,
On 03/15/2013 11:24 AM, Santosh Shilimkar wrote:
Benoit,
On Wednesday 20 February 2013 09:08 PM, Santosh Shilimkar wrote:
Few updates for OMAP5 found during testing OMAP5 DT builds. Couple
of patches were already posted
Hello Greg,
Here is a series of patches improving the way the omap-thermal driver
is written. There is a mix of added documentation, with functions rewrites
and cleanups regarding coding style. I am also adding myself as maintainer
of this driver.
Next I will be still improving the code in this
For code readability, this patch changes the bit definition
under omap-bandgap.h to use the BIT() macro.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.h | 96 +-
1 files changed, 48 insertions(+), 48 deletions(-)
In order to have a better code readability and organization, this patch
splits omap-bandgap.h into three headers.
. omap-bandgap.h will contain only the driver related data structures
definitions and macros
. omap4xxx-bandgap.h will contain only defines and bitfields
related to OMAP4 based devices
This patch converts the drivers to use the
module_platform_driver_probe() macro which makes the code smaller and
a bit simpler.
Signed-off-by: Fabio Porcedda fabio.porce...@gmail.com
Cc: Florian Tobias Schandinat florianschandi...@gmx.de
Acked-by: Nicolas Ferre nicolas.fe...@atmel.com #
This patch updates the existing data structures for omap bandgap,
inside omap-bandgap.h.
TODO: remove unused fields.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.h | 230 ++-
1 files changed, 189 insertions(+), 41
simple changes on alignments and white spaces
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 32 --
1 files changed, 15 insertions(+), 17 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
The omap_bandgap_get_sensor_data() function returns ERR_PTR(),
but it can also return NULL, in case of initilization, so we need to use
IS_ERR_OR_NULL() rather than only IS_ERR().
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-thermal-common.c |
This patch introduce a macro to read, update, write bitfields.
It will be specific to bandgap data structures.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 178 +++
1 files changed, 46 insertions(+), 132
Document the helper functions that manipulates registers and their
bitfields. All of them work based of the io mapped area.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 23 ++-
1 files changed, 22 insertions(+), 1
Change the way the omap_bandgap_power is written so that it has only
one exit entry (Documentation/CodingStyle).
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git
Document the helper function to turn a bandgap device on and off.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Document the Talert IRQ handler.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 12 +++-
1 files changed, 11 insertions(+), 1 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
There is no need to assign twice the same variable with the very same value.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git
This is introduces a series of marks inside the code to
better organize functions per group, aggregating their
functionality.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff
Rename adc_to_temp_conversion to omap_bandgap_adc_to_mcelsius. This name,
though longer, describes better the function.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 12 ++--
1 files changed, 6 insertions(+), 6 deletions(-)
Section of ADC helpers functions
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Follow Documentation/CodingStyle while doing omap_bandgap_adc_to_mcelsius.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 11 ---
1 files changed, 8 insertions(+), 3 deletions(-)
diff --git
Document the conversion function.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 11 +++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Section of IRQ handlers
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
b/drivers/staging/omap-thermal/omap-bandgap.c
Rename temp_to_adc_conversion to omap_bandgap_mcelsius_to_adc. This name,
though longer, describes better the function.
This patch also changes this function signature so the function follows
the style of this file.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
Follow Documentation/CodingStyle while doing omap_bandgap_mcelsius_to_adc
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 11 +++
1 files changed, 7 insertions(+), 4 deletions(-)
diff --git
As we have one conv table per bandgap device and not per sensor,
this patch changes the data structures so that the conv table
min and max values are now part of bandgap_data and not sensor_data.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
Document the conversion function.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 10 ++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
This patch improves the add_hyst function by:
. Renaming it to omap_bandgap_add_hyst
. Moving it to the ADC conversion functions section
. Changing its signature to follow the driver standard
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c
Document function to handle hysteresis.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 10 ++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Section of functions manipulating thresholds for Alert and Shutdown.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
This change improves temp_sensor_unmask_interrupts by:
. renaming it to omap_bandgap_unmask_interrupts
. making it a void function, as there is nothing really to report an error.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 14
This patch improves the code that handles threshold values
by creating single functions that are usable for tcold and
thot. This way we won't have duplicated functionality just
because it is handling different bitfields. Now
the added functions are reused in several places where
it is needed to
Section of helper functions to initilize the bandgap device
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Section with platform device callbacks
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
On Fri, Mar 15, 2013 at 1:56 PM, Benoit Cousson b-cous...@ti.com wrote:
Hi Javier,
On 03/15/2013 01:18 PM, Javier Martinez Canillas wrote:
On Mon, Mar 4, 2013 at 9:56 PM, Javier Martinez Canillas
javier.marti...@collabora.co.uk wrote:
The binding documentation for the OMAP GPIO controller
This patch names 'enable_continuous_mode' accordingly to the file
standard naming.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git
Simple update on function documentation.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |9 ++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Documents tshut handler better.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 10 +-
1 files changed, 9 insertions(+), 1 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Document function to initialize the conversion state machine.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Document function to update alert thresholds.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 13 +
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Add documentation of the function for reading alert thresholds
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 12
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Add documentation for the function to setup TSHUT handling
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c | 12
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Document function to build omap_bandgap structure
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c
Add myself as maintainer of the TI bandgap and thermal driver.
CC: Santosh Shilimkar santosh.shilim...@ti.com
CC: Zhang Rui rui.zh...@intel.com
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
MAINTAINERS |6 ++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git
Because there is a need to lock inside IRQ handler, this patch
changes the locking mechanism inside the omap-bandgap.[c,h] to
spinlocks. Now this lock is used to protect omap_bandgap struct
during APIs exposed (possibly used in sysfs handling functions)
and inside the ALERT IRQ handler.
Because
It is hard to use regmap because benefit of using regmap cache
may not be applicable as there is a specific sequence to
restore the bandgap context.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/TODO |1 -
1 files changed, 0 insertions(+), 1
Not all APIs exposed today are used. However all unused APIs
will be required once the thermal layer allows IRQ based
policies.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/TODO |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git
Document the helper to validate a struct omap_bandgap and a sensor id.
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
---
drivers/staging/omap-thermal/omap-bandgap.c |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git
Having twl4030_usb_phy_init() (detects if a cable is connected before
twl4030 is probed) in twl4030 probe makes cable connect events to be
missed by musb glue, since it gets loaded after twl4030. Having
twl4030_usb_phy_init as a usb_phy ops lets twl4030_usb_phy_init to be
called when glue is
The binding documentation for the OMAP GPIO controller has the
#interrupt-cells property listed before #interrupt-controller
property but its description after.
This is confusing so we move #interrupt-cells after the
interrupt-controller property so is followed by its description.
While being
On Friday 15 March 2013 06:11 PM, Benoit Cousson wrote:
+ Jon
Hi Kishon,
On 03/07/2013 02:35 PM, Kishon Vijay Abraham I wrote:
Hi Benoit,
Here are the dt data patches to get usb device functional in OMAP platforms.
All the patches deal with modifying arch/arm/boot except one which modifies
On 16:42-20130314, Jon Hunter wrote:
On 03/14/2013 03:58 PM, Nishanth Menon wrote:
The following series arose from trying to use BeagleBoard-XM (OMAP3 variant)
for doing CPU DVFS using cpufreq-cpu0. This series will eventually result in
migrating the cpufreq support only through device
On 16:44-20130314, Jon Hunter wrote:
On 03/14/2013 03:58 PM, Nishanth Menon wrote:
Add DT OPP table for OMAP36xx family of devices. This data is
decoded by OF with of_init_opp_table() helper function. This
overrides the default OMAP34xx CPU OPP table definition.
Not sure I following
Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
The DMA, PMU and OMAP3430 SDP board changes have been sent before
individually but re-sending here as a complete series for v3.10.
This is based upon Benoit's for_3.10/dts branch [1]. Branch available
here [2].
V2 changes:
-
If device-tree is present, then do not create the PMU device from within
the OMAP specific PMU code. This is required to allow device-tree to
create the PMU device from the PMU device-tree node.
PMU is not currently supported for OMAP4430 (due to a dependency on
having a cross-trigger interface
Add PMU nodes for OMAP2, OMAP3 and OMAP4460 devices.
Please note that the node for OMAP4460 has been placed in a separate
header file for OMAP4460, because the node is not compatible with
OMAP4430. The node for OMAP4430 is not included because PMU is not
currently supported on OMAP4430 due to the
Add the device-tree node for GPMC on OMAP2, OMAP4 and OMAP5 devices.
Signed-off-by: Jon Hunter jon-hun...@ti.com
---
arch/arm/boot/dts/omap2420.dtsi | 11 +++
arch/arm/boot/dts/omap2430.dtsi | 11 +++
arch/arm/boot/dts/omap4.dtsi| 11 +++
Add gpios bindings for OMAP2420 and OMAP2430 devices.
Signed-off-by: Jon Hunter jon-hun...@ti.com
---
arch/arm/boot/dts/omap2420.dtsi | 44 +++
arch/arm/boot/dts/omap2430.dtsi | 55 +++
2 files changed, 99 insertions(+)
diff
The OMAP3 gpio bindings are currently missing the reg and interrupt
properties and so add these properties.
Signed-off-by: Jon Hunter jon-hun...@ti.com
---
arch/arm/boot/dts/omap3.dtsi | 12
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/omap3.dtsi
The OMAP gpio binding documention [1] states that the #interrupts-cells
property for gpio controllers should be 2. Currently, for OMAP3+ devices
the #interrupt-cells is set to 1. By setting this property to 2, it
allows clients to pass a 2nd parameter indicating the sensitivity (level
or edge) and
Adds basic device-tree support for OMAP3430 SDP board which has 256MB
of RAM, 128MB ONENAND flash, 256MB NAND flash and uses the TWL4030
power management IC.
Signed-off-by: Jon Hunter jon-hun...@ti.com
---
arch/arm/boot/dts/Makefile |1 +
arch/arm/boot/dts/omap3430-sdp.dts | 141
Add SDMA controller binding for OMAP2+ devices and populate DMA client
information for SPI and MMC peripheral on OMAP3+ devices. Please note
that OMAP24xx devices do not have SPI and MMC bindings available yet and
so DMA client information is not populated.
Signed-off-by: Jon Hunter
On 16:49-20130314, Jon Hunter wrote:
On 03/14/2013 03:58 PM, Nishanth Menon wrote:
OMAP4430 and 4460 have different OPP definitions. So, create an SoC
variant dtsi file for 4460 and move the OPP definitions to it.
FYI, I had to create a similar file for PMU [1]. However, I called it
Fix which was done in the following commit in cpsw driver has
to be taken forward to davinci emac driver as well.
commit d35162f89b8f00537d7b240b76d2d0e8b8d29aa0
Author: Daniel Mack zon...@gmail.com
Date: Tue Mar 12 06:31:19 2013 +
net: ethernet: cpsw: fix usage of
On 10:48-20130315, Santosh Shilimkar wrote:
On Friday 15 March 2013 02:28 AM, Nishanth Menon wrote:
The following series arose from trying to use BeagleBoard-XM (OMAP3 variant)
for doing CPU DVFS using cpufreq-cpu0. This series will eventually result in
migrating the cpufreq support only
On Thu, Mar 14, 2013 at 11:51 PM, Viresh Kumar viresh.ku...@linaro.org wrote:
On Fri, Mar 15, 2013 at 2:28 AM, Nishanth Menon n...@ti.com wrote:
We can now use cpufreq-cpu0 driver using DT entries.
remove the redundant omap-cpufreq driver from the tree.
Remove MAINTAINERS file entry for the
On Fri, Mar 15, 2013 at 06:58:49PM +0530, Kishon Vijay Abraham I wrote:
commit 63378a (usb: phy: remove CONFIG_USB_OTG_UTILS) removed
CONFIG_USB_OTG_UTILS from Kconfig but failed to removed from Makefile.
Fixed it here.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
I can fold it in
On 03/15/2013 08:56 AM, Nishanth Menon wrote:
On 16:44-20130314, Jon Hunter wrote:
On 03/14/2013 03:58 PM, Nishanth Menon wrote:
Add DT OPP table for OMAP36xx family of devices. This data is
decoded by OF with of_init_opp_table() helper function. This
overrides the default OMAP34xx CPU OPP
Hi Seb,
On 03/11/2013 08:50 AM, Sebastien Guiriec wrote:
This patch serie is converting OMAP Audio IPs in order to use OMAP sDMA DT
binding in case of DT boot on OMAP2+ platforms.
It is depending on the next patches:
[1] http://www.spinics.net/lists/arm-kernel/msg227836.html
[2]
On Fri, Mar 15, 2013 at 06:58:50PM +0530, Kishon Vijay Abraham I wrote:
musb does not use DMA buffer for ep0 but it uses the same giveback
function *musb_g_giveback* for all endpoints (*musb_g_ep0_giveback* calls
*musb_g_giveback*). So for ep0 case request.dma will be '0'
and will result in
Hi Jon,
On 03/15/2013 02:57 PM, Jon Hunter wrote:
Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
The DMA, PMU and OMAP3430 SDP board changes have been sent before
individually but re-sending here as a complete series for v3.10.
This is based upon Benoit's
On 09:26-20130315, Jon Hunter wrote:
On 03/15/2013 08:56 AM, Nishanth Menon wrote:
On 16:44-20130314, Jon Hunter wrote:
On 03/14/2013 03:58 PM, Nishanth Menon wrote:
Add DT OPP table for OMAP36xx family of devices. This data is
decoded by OF with of_init_opp_table() helper function
On 03/15/2013 09:21 AM, Nishanth Menon wrote:
On 10:48-20130315, Santosh Shilimkar wrote:
On Friday 15 March 2013 02:28 AM, Nishanth Menon wrote:
The following series arose from trying to use BeagleBoard-XM (OMAP3 variant)
for doing CPU DVFS using cpufreq-cpu0. This series will eventually
On 03/15/2013 09:38 AM, Nishanth Menon wrote:
On 09:26-20130315, Jon Hunter wrote:
On 03/15/2013 08:56 AM, Nishanth Menon wrote:
On 16:44-20130314, Jon Hunter wrote:
On 03/14/2013 03:58 PM, Nishanth Menon wrote:
Add DT OPP table for OMAP36xx family of devices. This data is
decoded
On 09:56-20130315, Jon Hunter wrote:
[..]
But, that said, there is one path I see possible:
- keep omap-cpufreq alive (BUT I will add a patch that will not let it init
when in DT entries are present)
- add DT entries for all relevant OMAPs - in DT mode, we will *only*
support cpufreq
On 09:58-20130315, Jon Hunter wrote:
On 03/15/2013 09:38 AM, Nishanth Menon wrote:
On 09:26-20130315, Jon Hunter wrote:
On 03/15/2013 08:56 AM, Nishanth Menon wrote:
On 16:44-20130314, Jon Hunter wrote:
On 03/14/2013 03:58 PM, Nishanth Menon wrote:
Add DT OPP table for OMAP36xx
Adds device nodes for HS USB Host module, TLL module,
OHCI and EHCI controllers.
CC: Benoît Cousson b-cous...@ti.com
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/boot/dts/omap3.dtsi | 31 +++
1 files changed, 31 insertions(+), 0 deletions(-)
diff --git
Provide RESET and Power regulators for the USB PHY,
the USB Host port mode and the PHY device.
Also provide pin multiplexer information for USB host
pins.
CC: Benoît Cousson b-cous...@ti.com
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/boot/dts/omap3-beagle.dts | 71
Add platform device for 'nop-usb-xceiv'. This will be used as a
PHY for HS USB Port 2, so provide binding information for it.
Use usbhs_init_phys() to register the PHY's RESET regulator.
VAUX2 supplies the PHY's VCC.
Signed-off-by: Roger Quadros rog...@ti.com
---
Add 2 platform devices for 'nop-usb-xceiv'. These will be used as a
PHY for HS USB Ports 1 and 2, so provide binding information for them.
Use usbhs_init_phys() to register the PHY's RESET regulator.
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/mach-omap2/board-omap3touchbook.c |
Add platform device for 'nop-usb-xceiv'. This will be used as a
PHY for HS USB Port 2, so provide binding information for it.
Use usbhs_init_phys() to register the PHY's RESET regulator.
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/mach-omap2/board-omap3stalker.c | 29
Adds device nodes for HS USB Host module, TLL module,
OHCI and EHCI controllers.
CC: Benoît Cousson b-cous...@ti.com
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/boot/dts/omap4.dtsi | 30 ++
1 files changed, 30 insertions(+), 0 deletions(-)
diff --git
Provide the RESET and Power regulators for the USB PHY,
the USB Host port mode and the PHY device.
Also provide pin multiplexer information for the USB host
pins.
CC: Benoît Cousson b-cous...@ti.com
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/boot/dts/omap4-panda.dts | 56
1 - 100 of 149 matches
Mail list logo
