drivers/regulator/tps65910-regulator.c: In function
‘tps65910_parse_dt_reg_data’:
drivers/regulator/tps65910-regulator.c:1018: error: implicit declaration of
function ‘of_get_child_by_name’
drivers/regulator/tps65910-regulator.c:1018: warning: assignment makes pointer
from integer without a
On Sunday 15 March 2015 10:50:42 Eliad Peller wrote:
yeah, i missed it :/
looks like there's no platform that defines platform data for it.
i'll replace the dev_get_platdata() with a function that only parses
the clock-frequency properties (the irq is taken in this case from the
On Sunday 15 March 2015 10:43:35 Eliad Peller wrote:
The other option would be to have the whole series in a immutable
branch against v3.0-rc1 that can be merged into both wirelss tree
and omap tree.
i think that could be easier.
or maybe you can just take them all through the omap
On Fri, Mar 13, 2015 at 5:27 PM, Tony Lindgren t...@atomide.com wrote:
* Eliad Peller el...@wizery.com [150312 05:09]:
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
-static void __init omap3_evm_legacy_init(void)
-{
- legacy_init_wl12xx(3840, 0,
hi Sébastien,
On Fri, Mar 13, 2015 at 6:11 PM, Sébastien Szymanski
sebastien.szyman...@armadeus.com wrote:
Hello,
On 03/12/2015 01:09 PM, Eliad Peller wrote:
NOTE: all the platform patches were compile-tested
only. I'm looking for some wl12xx card (that i should
have somewhere) to test the
On Sunday 08 March 2015 17:35:13 Paul Walmsley wrote:
On Sun, 8 Mar 2015, Pali Rohár wrote:
On Friday 06 March 2015 23:23:06 Aaro Koskinen wrote:
On Fri, Mar 06, 2015 at 10:36:32AM -0800, Tony Lindgren
wrote:
Are there any fixes in this series that should go into
v4.0-rc series, or
+Kalle
On Fri, Mar 13, 2015 at 5:00 PM, Tony Lindgren t...@atomide.com wrote:
* Eliad Peller el...@wizery.com [150312 05:09]:
From: Luciano Coelho l...@coelho.fi
Instead of defining an enumeration with the FW specific values for the
different clock rates, use the actual frequency instead.
On Fri, Mar 13, 2015 at 5:13 PM, Tony Lindgren t...@atomide.com wrote:
* Eliad Peller el...@wizery.com [150312 05:10]:
Now that we have wlcore device-tree bindings in place
(for both wl12xx and wl18xx), remove the legacy
wl12xx_platform_data struct, and move its members
into the platform
Hi Sakari,
Thank you for the patch.
On Monday 16 March 2015 02:01:17 Sakari Ailus wrote:
The OMAP 3630 syscon register set was missing
OMAP3630_CONTROL_CAMERA_PHY_CTRL register at offset 0x2f0. This register
used to be mapped directly by the omap3isp driver, which is now moving to
use syscon
Hi Tony and others,
I had a couple of patches that contained dts changes in my OMAP 3 ISP / N9
camera DT support set. Since it became apparent that at least some of the
changes should go through linux-omap due to potential conflicts with other
patches, I decided to separate the dts changes from
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
.../devicetree/bindings/media/ti,omap3isp.txt | 71
MAINTAINERS|1 +
include/dt-bindings/media/omap3-isp.h | 22 ++
3 files changed, 94 insertions(+)
Add support for the primary camera of the Nokia N950 and N9.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
arch/arm/boot/dts/omap3-n9.dts | 37 +
arch/arm/boot/dts/omap3-n950.dts | 37 +
2 files changed, 74
The OMAP 3630 syscon register set was missing
OMAP3630_CONTROL_CAMERA_PHY_CTRL register at offset 0x2f0. This register
used to be mapped directly by the omap3isp driver, which is now moving to
use syscon instead. The omap3isp driver did not support DT so no driver
change is needed in this patch.
Hi Sakari,
Thank you for the patch.
On Monday 16 March 2015 02:01:19 Sakari Ailus wrote:
The resources the ISP needs are slightly different on 3[45]xx and 3[67]xx.
Especially the phy-type property is different.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
Acked-by: Laurent Pinchart
Hi Sakari,
Thank you for the patch.
On Monday 16 March 2015 02:01:20 Sakari Ailus wrote:
Add support for the primary camera of the Nokia N950 and N9.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
arch/arm/boot/dts/omap3-n9.dts | 37 +++
Only the histogram sub-block driver uses the physical address. Do not store
it for other sub-blocks.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
---
drivers/media/platform/omap3isp/isp.c |3 ++-
Only check for call platform data callback functions if there's platform
data. Also take care of a few other cases where the NULL pdata pointer could
have been accessed, and remove the check for NULL dev-platform_data
pointer.
Removing the check for NULL dev-platform_data isn't strictly needed by
Add the ISP device to omap3 DT include file and add support to the driver to
use it.
Also obtain information on the external entities and the ISP configuration
related to them through the Device Tree in addition to the platform data.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
The omap3isp MMIO register block is contiguous in the MMIO register space
apart from the fact that the ISP IOMMU register block is in the middle of
the area. Ioremap it at two occasions, and keep the rest of the layout of
the register space internal to the omap3isp driver.
Signed-off-by: Sakari
Make omap3isp configuration data structures more suitable for consumption by
the DT by separating the I2C bus information of all the sub-devices in a
group and the ISP bus information from each other. The ISP bus information
is made a pointer instead of being directly embedded in the struct.
In
Add lane-polarity property to endpoint nodes. This essentially tells that
the order of the differential signal wires is inverted.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
Documentation/devicetree/bindings/media/video-interfaces.txt |6 ++
1 file changed, 6 insertions(+)
diff
Rename VDD_CSIPHY1 as vdd-csiphy1 and VDD_CSIPHY2 as vdd-csiphy2.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
---
drivers/media/platform/omap3isp/isp.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
The video port clock is l3_ick divided by vpclk_div. This clock must be high
enough for the external pixel rate. The video port requires two clock cycles
to process a pixel.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
---
From: Laurent Pinchart laurent.pinch...@ideasonboard.com
Signed-off-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
---
drivers/media/platform/omap3isp/isp.c | 25 +
1 file changed, 25 insertions(+)
diff --git a/drivers/media/platform/omap3isp/isp.c
Move the code which connects the external entity to an ISP entity into a
separate function. This disconnects it from parsing the platform data.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
---
drivers/media/platform/omap3isp/isp.c |
Add lane_polarity field to struct v4l2_of_bus_mipi_csi2 and write the
contents of the lane polarity property to it. The field tells the polarity
of the physical lanes starting from the first one. Any unused lanes are
ignored, i.e. only the polarity of the used lanes is specified.
Also rework
Print a warning when the driver is used with platform data. Existing
platform data user should move to DT now.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
drivers/media/platform/omap3isp/isp.c |2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/platform/omap3isp/isp.c
If an uninitialised v4l2_subdev struct was passed to
media_entity_create_link(), one of the BUG_ON()'s in the function will be
hit since media_entity.num_pads will be zero. Avoid this by checking whether
the num_pads field is non-zero for the interface.
Signed-off-by: Sakari Ailus
Hi folks,
Here's the first non-RFC version of the omap3isp driver DT support patchset.
It's a sub-set of patches in this RFC set:
URL:http://www.spinics.net/lists/linux-media/msg87263.html
What has been changed since the RFC set in these patches is roughly:
- The patches have been rebased on
The mutex was not destroyed correctly if dma_coerce_mask_and_coherent()
failed for some reason.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
---
drivers/media/platform/omap3isp/isp.c |2 +-
1 file changed, 1 insertion(+), 1
The syscon register isn't part of the ISP, use it through the syscom driver
regmap instead. The syscom block is considered to be from 343x on ISP
revision 2.0 whereas 15.0 is assumed to have 3630 syscon.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
Acked-by: Laurent Pinchart
The resources the ISP needs are slightly different on 3[45]xx and 3[67]xx.
Especially the phy-type property is different.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
arch/arm/boot/dts/omap34xx.dtsi | 17 +
arch/arm/boot/dts/omap36xx.dtsi | 17 +
2
Hi Sakari,
Thank you for the patch.
On Monday 16 March 2015 02:01:18 Sakari Ailus wrote:
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
.../devicetree/bindings/media/ti,omap3isp.txt | 71 +
MAINTAINERS|1 +
33 matches
Mail list logo
