The VBUS line of USB2 is connected to VBUS detect logic on
the PMIC. Use the palmas-usb driver to report VBUS events
to the USB driver.
As the palmas-usb driver supports GPIO based ID reporting
provide the GPIO for ID pin as well.
Signed-off-by: Roger Quadros rog...@ti.com
---
Some palmas based chip variants do not have OTG based ID logic.
For these variants we rely on GPIO based USB ID detection.
These chips do have VBUS comparator for VBUS detection so we
continue to use the old way of detecting VBUS.
Signed-off-by: Roger Quadros rog...@ti.com
---
Hi,
am57xx-beagle-x15 uses a variant of the Palmas chip and has
USB1 port's VBUS and ID connected to it.
However this Palmas variant does not support OTG ID detection but
does have GPIO support on the pin where ID line is connected.
This series adds GPIO based ID detection to the Palmas extcon
regulator_disable of pbias always writes '0' to the enable_reg.
However actual disable value of pbias regulator is not always '0'.
Fix it by populating the disable_val in pbias_reg_info for the
various platforms and assign it to the disable_val of
pbias regulator descriptor. This will be used by
commit ed8509edddeb (ARM: dts: omap5: add minimal l4 bus
layout with control module support) moved pbias_regulator dt node
from being a child node of ocp to be the child node of
omap5_padconf_global. After this device for pbias_regulator is
not created.
Fix it by adding simple-bus compatible
commit d919501feffa (ARM: dts: dra7: add minimal l4 bus
layout with control module support) moved pbias_regulator dt node
from being a child node of ocp to be the child node of
scm_conf. After this device for pbias_regulator is
not created.
Fix it by adding simple-bus compatible property to
On Fri, Jul 24, 2015 at 05:06:10AM -0700, Tony Lindgren wrote:
The following changes since commit bc0195aad0daa2ad5b0d76cce22b167bc3435590:
Linux 4.2-rc2 (2015-07-12 15:10:30 -0700)
are available in the git repository at:
Hi,
On 16/07/15 16:16, Roger Quadros wrote:
For hwmods without sysc, _init_mpu_rt_base(oh) won't be called and so
_find_mpu_rt_port(oh) will return NULL thus preventing ready state check
on those modules after the module is enabled.
This can potentially cause a bus access error if the
On 07/27/2015 04:19 PM, Roger Quadros wrote:
Hi,
On 23/07/15 17:54, Vignesh R wrote:
On am437x-gp-evm, pixcir touchscreen can wake the system from low power
state by generating wake-up interrupt via pinctrl and IO daisy chain.
Add support for optional wakeup interrupt source by
On Fri, Jul 24, 2015 at 05:06:11AM -0700, Tony Lindgren wrote:
The following changes since commit f9d50fef4b6447527c2be1ad07499221c2511391:
ARM: OMAP2+: omap3-pandora: add wifi support (2015-07-21 04:07:42 -0700)
are available in the git repository at:
On Tue, Jul 21, 2015 at 6:26 PM, Sebastian Andrzej Siewior
bige...@linutronix.de wrote:
This patch converts gpio_bank.lock from a spin_lock into a
raw_spin_lock. The call path is to access this lock is always under a
raw_spin_lock, for instance
- __setup_irq() holds desc-lock with irq off
Hi,
On 23/07/15 17:54, Vignesh R wrote:
On am437x-gp-evm, pixcir touchscreen can wake the system from low power
state by generating wake-up interrupt via pinctrl and IO daisy chain.
Add support for optional wakeup interrupt source by regsitering to
automated wake IRQ framework introduced by
Patch series contains a couple of fixes. One that disables pbias
properly (write the correct value to disable regulator instead of
writing 0). And the other is to get the correct address to
enable/disable the pbias regulator.
Tested on DRA7 (tests pbias_mmc_omap5) and OMAP5 panda (tests
vsel_reg and enable_reg of the pbias regulator descriptor should actually
have the offset from syscon. However after the pbias device tree node
is moved as a child node of syscon, vsel_reg and enable_reg has the
absolute address because of the address translation that happens while
creating device
commit 72b10ac00eb1 (ARM: dts: omap24xx: add minimal l4 bus
layout with control module support) moved pbias_regulator dt node
from being a child node of ocp to be the child node of
scm_conf. After this device for pbias_regulator is
not created.
Fix it by adding simple-bus compatible property to
pbias device creation got broken once SCM cleanup got merged.
This patch series re-enables device creation by adding
simple-bus in the compatible property of the syscon
dt node.
validated this series in DRA72, OMAP4 PANDA and OMAP5 UEVM
boards.
Kishon Vijay Abraham I (4):
ARM: dts: omap24xx:
commit 7415b0b4c645 (ARM: dts: omap4: add minimal l4 bus layout
with control module support) moved pbias_regulator dt node
from being a child node of ocp to be the child node of
omap4_padconf_global. After this device for pbias_regulator
is not created.
Fix it by adding simple-bus compatible
On 07/27/2015 02:50 PM, Linus Walleij wrote:
Patch applied.
thanks.
Now this question appear in my head:
Is drivers/gpio full of stuff that will not work with the -RT kernel,
and is this a change that should be done mutatis mutandis on
all the GPIO drivers?
I described two call paths
On Thu, Jul 16, 2015 at 10:30:48AM +0200, Teresa Remmet wrote:
phyCORE-AM335x is a SoM (System on Module) containing
a AM335x SOC. The module can be connected to different
carrier boards.
Some hardware parts are configurable on the phyCORE-AM335x.
So they are disabled on default in this som
On Mon, Jul 27, 2015 at 06:56:48AM +, Badola Nikhil wrote:
-Original Message-
From: Felipe Balbi [mailto:ba...@ti.com]
Sent: Thursday, July 23, 2015 8:39 PM
To: Felipe Balbi
Cc: Badola Nikhil-B46172; linux-ker...@vger.kernel.org; linux-
u...@vger.kernel.org;
Hi Ben,
On Mon, Jul 27, 2015 at 10:59:56AM +0100, Ben Dooks wrote:
I think you missed the part adding the !ARCH_MULTIPLATFORM
dependency in Kconfig for ARM_ERRATA_430973. I only removed the
check in the sourcecode, since it is no longer required with the
dependency being in Kconfig.
On Mon, Jul 27, 2015 at 04:49:22PM +0530, Vignesh R wrote:
On 07/27/2015 04:19 PM, Roger Quadros wrote:
Hi,
On 23/07/15 17:54, Vignesh R wrote:
On am437x-gp-evm, pixcir touchscreen can wake the system from low power
state by generating wake-up interrupt via pinctrl and IO daisy
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:
IRQF_VALID - !IRQ_NOREQUEST
IRQF_PROBE - !IRQ_NOPROBE
IRQF_NOAUTOEN - IRQ_NOAUTOEN
For
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:
IRQF_VALID - !IRQ_NOREQUEST
IRQF_PROBE - !IRQ_NOPROBE
IRQF_NOAUTOEN - IRQ_NOAUTOEN
For
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:
IRQF_VALID - !IRQ_NOREQUEST
IRQF_PROBE - !IRQ_NOPROBE
IRQF_NOAUTOEN - IRQ_NOAUTOEN
For
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:
IRQF_VALID - !IRQ_NOREQUEST
IRQF_PROBE - !IRQ_NOPROBE
IRQF_NOAUTOEN - IRQ_NOAUTOEN
For
Russell
On 07/15/2015 12:47 PM, Russell King wrote:
Restore the OMAP4 barrier behaviour using the new implementation which
allows multiplatform systems to hook into the mb() and wmb() ARM
implementations to perform any necessary additional barrier maintanence.
Signed-off-by: Russell King
On Mon, 27 Jul 2015, Rob Herring wrote:
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:
IRQF_VALID - !IRQ_NOREQUEST
IRQF_PROBE -
Hi Roger,
On 07/27/2015 07:39 PM, Roger Quadros wrote:
Chanwoo,
On 10/07/15 18:54, Chanwoo Choi wrote:
Hi Roger,
Thanks for your working.
I'll review, test and apply it on next week because I'm on vacation now.
Can you please take this for -rc cycle? Thanks.
I'm sorry for delay
On 2015. 7. 28., at AM 5:55, Rob Herring r...@kernel.org wrote:
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:
IRQF_VALID -
On Wed, Jul 22, 2015 at 10:04:45PM +0200, Sebastian Reichel wrote:
The GPIOD API can be used from boardcode, so that
the DT check can be removed. To avoid breaking
existing boardcode, _optional() variant has been
chosen. For completly removing the DT check, the
regulator has also been made
Hi,
On 21/07/15 13:52, Li Jun wrote:
Hi,
[...]
+ otg_timer_init(A_WAIT_ENUM, otgd, set_tmout, TB_SRP_FAIL, NULL);
2 timers are missing: B_DATA_PLS, B_SSEND_SRP.
Those 2 are not used by usb-otg-fsm.c. We can add it when usb-otg-fsm.c is
updated.
ok.
+}
[...]
+
+/**
+
Kishon Tony,
You can please pick the first 2 patches for -next.
The 3rd patch is not required for SATA and I will send it as
a separate series.
cheers,
-roger
On 17/07/15 16:47, Roger Quadros wrote:
Hi,
Implement workaround for SATA errata i783 (SATA Lockup After SATA DPLL
Hi,
This series cleans up the scm_conf node.
v2:
- split patch. use only core_sma_sw registers for the new scm_conf child.
cheers,
-roger
Roger Quadros (3):
ARM: dts: dra7: Remove ctrl_core and ctrl_general nodes
ARM: dts: dra7: fix pinmux@1400 resource length
ARM: dts: dra7: Add
This region contains CTRL_CORE_SMA_SW2..9 registers which
are not specific to any domain and can be reasonably
accessed via syscon driver.
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/boot/dts/dra7.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git
These nodes are wrongly placed. They must come under the
scm node. Nobody uses them either so get rid of them.
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/boot/dts/dra7.dtsi | 10 --
1 file changed, 10 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi
We need to add 4 bytes to include the last 32-bit register space.
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm/boot/dts/dra7.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index cf2931e..913032b 100644
On 27/07/15 13:21, Roger Quadros wrote:
Kishon Tony,
You can please pick the first 2 patches for -next.
Sorry, I meant for -rc.
The 3rd patch is not required for SATA and I will send it as
a separate series.
This can go in -next.
cheers,
-roger
cheers,
-roger
On 17/07/15
Chanwoo,
On 10/07/15 18:54, Chanwoo Choi wrote:
Hi Roger,
Thanks for your working.
I'll review, test and apply it on next week because I'm on vacation now.
Can you please take this for -rc cycle? Thanks.
cheers,
-roger
Thanks,
Chanwoo Choi
On Tue, Jul 7, 2015 at 3:06 PM, Roger
On Mon, Jul 27, 2015 at 10:59:56AM +0100, Ben Dooks wrote:
This isn't the only place ARM_ERRATA_430973 is used, and if
you make it configurable on !ARCH_MULTIPLATFORM then it makes
it impossible to use a ARCH_MULTIPLATFORM kernel on something
that is an Cortex-A8.
See
No functional change. This is in preparation for handling non maxpacket
aligned transfers greater than bounce buffer size. This is basically to
avoid code duplication when using chained TRB transfers to handle
non maxpacket aligned transfers greater than bounce buffer size.
Signed-off-by: Kishon
No functional change. Used _roundup_ macro to calculate the transfer
size aligned to maxpacket in dwc3_ep0_complete_data. It also makes it
similar to how transfer size is calculated in __dwc3_ep0_do_control_data.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
drivers/usb/dwc3/ep0.c |
-Original Message-
From: Felipe Balbi [mailto:ba...@ti.com]
Sent: Thursday, July 23, 2015 8:39 PM
To: Felipe Balbi
Cc: Badola Nikhil-B46172; linux-ker...@vger.kernel.org; linux-
u...@vger.kernel.org; linux-omap@vger.kernel.org;
gre...@linuxfoundation.org
Subject: Re: [PATCH 2/3]
No functional change. Added a new parameter in _dwc3_ep0_start_trans_ to
indicate whether the TRB is a chained TRB or last TRB. This is in
preparation for adding chained TRB support for ep0.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
drivers/usb/dwc3/ep0.c | 15 ---
1
This series adds PM support to pci-dra7xx so that PCI clocks can be disabled
during suspend and enabled back during resume without affecting
PCI functionality.
Changes from v2:
*) Used SET_SYSTEM_SLEEP_PM_OPS and SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for
populating PM ops.
Changes from v1:
*) Moved
Fix the error handling code in case pm_runtime_get_sync fails. Now
when pm_runtime_get_sync fails pm_runtime_disable is invoked so that
there is no unbalanced pm_runtime_enable calls.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
drivers/pci/host/pci-dra7xx.c |4 +++-
1 file
Add PM support to pci-dra7xx so that PCI clocks can be disabled
during suspend and enabled back during resume without affecting
PCI functionality.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
drivers/pci/host/pci-dra7xx.c | 72 +
1 file
DRA7xx require MSE bit to be cleared to set the master in
standby mode. (In DRA7xx TRM_vE, section 24.9.4.5.2.2.1 PCIe
Controller Master Standby Behavior advises to use the clearing
of the local MSE bit to set the master in standby. Without this
some of the clocks do not idle).
Cleared the MSE
Use chained TRB mechanism to handle non maxpacket aligned transfers
greater than bounce buffer size. With this the first TRB will be programmed
to receive 'ALIGN(ur-length - maxp, maxp)' data and the second TRB
will be programmed to receive the remaining data using bounce buffer.
Signed-off-by:
Add chained TRB support to ep0. Now TRB's can be chained just by
invoking _dwc3_ep0_start_trans_ with 'chain' parameter set to true.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
drivers/usb/dwc3/ep0.c| 16 +---
drivers/usb/dwc3/gadget.c |2 +-
2 files changed, 14
Patch series first fixes memory corruption and then adds support to
handle non maxpacket aligned transfers.
Patch series adds support to handle non maxpacket aligned transfers
greater than bounce buffer size (512). It first adds chained TRB
support and then uses it to handle non maxpacket aligned
DWC3 uses bounce buffer to handle non max packet aligned OUT transfers and
the size of bounce buffer is 512 bytes. However if the host initiates OUT
transfers of size more than 512 bytes (and non max packet aligned), the
driver throws a WARN dump but still programs the TRB to receive more than
512
On Monday 27 July 2015 00:31:19 Pavel Machek wrote:
On Wed 2015-07-01 23:16:21, Tony Lindgren wrote:
* Pavel Machek pa...@ucw.cz [150701 06:11]:
On Wed 2015-07-01 03:34:22, Tony Lindgren wrote:
Works for me after enabling the idle timeouts with the following
script and blanking
Hello,
This patch series reworks endpoint matching and claiming mechanism in
epautoconf. From v2 there are couple of new patches adding 'ep_match'
to usb_gadget_ops and removing chip-specific quirk handling from generic
code of autoconfig.
I'm not sure if this patch set isn't too long, as it has
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/fusb300_udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/fusb300_udc.c
b/drivers/usb/gadget/udc/fusb300_udc.c
Tony,
On 21/07/15 13:54, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [150708 03:45]:
Hi,
Enables dual-role feaure on supported boards.
Depends on
[1] - core USB DRD support -
http://thread.gmane.org/gmane.linux.kernel/1991413
[2] - dwc3 DRD support -
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/s3c2410_udc.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c
b/drivers/usb/gadget/udc/s3c2410_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/pxa27x_udc.h | 33 ++---
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/mv_u3d_core.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c
b/drivers/usb/gadget/udc/mv_u3d_core.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/musb/musb_gadget.c | 12
1 file changed, 12 insertions(+)
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/renesas_usbhs/mod_gadget.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c
b/drivers/usb/renesas_usbhs/mod_gadget.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/goku_udc.c | 8
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/gadget/udc/goku_udc.c
b/drivers/usb/gadget/udc/goku_udc.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/m66592-udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/m66592-udc.c
b/drivers/usb/gadget/udc/m66592-udc.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/pxa25x_udc.c | 32
1 file changed, 32 insertions(+)
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/r8a66597-udc.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c
b/drivers/usb/gadget/udc/r8a66597-udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/lpc32xx_udc.c | 32
1 file changed, 32 insertions(+)
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/net2280.c | 50 ++--
1 file changed, 38 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/gadget/udc/net2280.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/s3c-hsudc.c | 15 +++
1 file changed, 15 insertions(+)
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c
b/drivers/usb/gadget/udc/s3c-hsudc.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/net2272.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/pch_udc.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/pch_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/isp1760/isp1760-udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/isp1760/isp1760-udc.c
b/drivers/usb/isp1760/isp1760-udc.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/omap_udc.c | 22 ++
1 file changed, 22 insertions(+)
diff --git a/drivers/usb/gadget/udc/omap_udc.c
b/drivers/usb/gadget/udc/omap_udc.c
On 20/07/15 15:08, Tero Kristo wrote:
On 07/17/2015 04:47 PM, Roger Quadros wrote:
This register is required to be passed to the SATA PHY driver
to workaround errata i783 (SATA Lockup After SATA DPLL Unlock/Relock).
Signed-off-by: Roger Quadros rog...@ti.com
---
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/dummy_hcd.c | 65 +-
1 file changed, 50 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/at91_udc.c | 33 -
1 file changed, 24 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/gadget/udc/at91_udc.c
Add macros useful while initializing array of endpoint capabilities
structures. These macros makes structure initialization more compact
to decrease number of code lines and increase readability of code.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
include/linux/usb/gadget.h | 20
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/bdc/bdc_ep.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c
b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index
On 20/07/15 04:23, Peter Chen wrote:
On Fri, Jul 17, 2015 at 01:47:12PM +0300, Roger Quadros wrote:
+ * DRD mode hardware Inputs
+ *
+ * @id: TRUE for B-device, FALSE for A-device.
+ * @vbus: VBUS voltage in regulation.
+ *
* OTG hardware Inputs
*
*Common inputs
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/fsl_udc_core.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/fotg210-udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c
b/drivers/usb/gadget/udc/fotg210-udc.c
Introduce struct usb_ep_caps which contains information about capabilities
of usb endpoints - supported transfer types and directions. This structure
should be filled by UDC driver for each of its endpoints, and will be
used in epautoconf in new ep matching mechanism which will replace ugly
So far it was necessary for usb functions to set ep-driver_data in
endpoint obtained from autoconfig to non-null value, to indicate that
endpoint is claimed by function (in autoconfig it was checked if endpoint
has set this field to non-null value, and if it has, it was assumed that
it is
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/chipidea/udc.c | 14 ++
1 file changed, 14 insertions(+)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index b7cca3e..4aaa476 100644
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/gr_udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/bcm63xx_udc.c | 25 +
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/dwc2/gadget.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 731b13d..3ee5b4c 100644
---
Convert endpoint configuration to new capabilities model.
Fixed typo in epc-nulk to epc-bulk.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/staging/emxx_udc/emxx_udc.c | 60 ++---
1 file changed, 29 insertions(+), 31 deletions(-)
diff --git
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/fsl_qe_udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c
b/drivers/usb/gadget/udc/fsl_qe_udc.c
index
On 21/07/15 08:11, Kishon Vijay Abraham I wrote:
Hi,
On Monday 20 July 2015 05:34 PM, Tero Kristo wrote:
On 07/17/2015 04:47 PM, Roger Quadros wrote:
scm_conf1 maps the control register address space after the
padconf till the end.
Fix the scm_conf and pmx_core resource lengths. We need
On 20/07/15 15:04, Tero Kristo wrote:
On 07/17/2015 04:47 PM, Roger Quadros wrote:
scm_conf1 maps the control register address space after the
padconf till the end.
Fix the scm_conf and pmx_core resource lengths. We need to add
4 bytes to include the last 32-bit register space.
Remove the
On 27/07/15 02:14, Sebastian Reichel wrote:
Hi,
On Sun, Jul 26, 2015 at 11:51:45PM +0100, Russell King - ARM Linux
wrote:
On Fri, Jul 24, 2015 at 02:16:06AM +0200, Sebastian Reichel
wrote:
On Thu, Jul 23, 2015 at 01:35:53PM +0100, Russell King - ARM
Linux wrote:
On Thu, Jul 23, 2015
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/amd5536udc.c | 57 ++---
1 file changed, 47 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/udc/amd5536udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/dwc3/gadget.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index d97fcfa..65fd959 100644
---
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/udc-xilinx.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/gadget/udc/udc-xilinx.c
b/drivers/usb/gadget/udc/udc-xilinx.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/mv_udc_core.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c
b/drivers/usb/gadget/udc/mv_udc_core.c
index
Add callback that is called by epautoconf to allow UDC driver match the
best endpoint for specific descriptor. It's intended to supply mechanism
which allows to get rid of chip-specific endpoint matching code from
epautoconf.
If gadget has set 'ep_match' callback we prefer to call it first, and
Rework ep_matches() function to make it shorter and more readable.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/epautoconf.c | 87 +
1 file changed, 35 insertions(+), 52 deletions(-)
diff --git
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.
Signed-off-by: Robert Baldyga
Move ep_matches() function to udc-core and rename it to
usb_gadget_ep_match_desc(). This function can be used by UDC drivers
in 'match_ep' callback to avoid writing lots of repetitive code.
Replace all calls of ep_matches() with usb_gadget_ep_match_desc().
Signed-off-by: Robert Baldyga
1 - 100 of 106 matches
Mail list logo
