Hi,
I've been trying to get DVI on my beagleboard XM to output a picture with
mainline and with 3.15rc it still doesn't work. If I statically build in
everything the drm encoders and connectors all go into deferred probe mode and
fail, falling back to 1024x768. I with omapdrm and
Op 2 mei 2014, om 13:25 heeft Javier Martinez Canillas jav...@dowhile0.org
het volgende geschreven:
Hello Koen,
On Fri, May 2, 2014 at 12:47 PM, Koen Kooi k...@dominion.thruhere.net wrote:
Hi,
I've been trying to get DVI on my beagleboard XM to output a picture with
mainline
Op 2 mei 2014, om 13:59 heeft Tomi Valkeinen tomi.valkei...@ti.com het
volgende geschreven:
On 02/05/14 13:47, Koen Kooi wrote:
Hi,
I've been trying to get DVI on my beagleboard XM to output a picture with
mainline and with 3.15rc it still doesn't work. If I statically build
Op 13 sep. 2013, om 00:27 heeft Kevin Hilman khil...@linaro.org het volgende
geschreven:
Koen Kooi k...@dominion.thruhere.net writes:
Here are two patches to fix MMC on beaglebone, one fixes card detect on BBW,
the other adds the eMMC entry for BBB and its fixed regulator. After
Op 13 sep. 2013, om 12:09 heeft Sekhar Nori nsek...@ti.com het volgende
geschreven:
Mark the eMMC module on BeagleBone black as non removable.
Signed-off-by: Sekhar Nori nsek...@ti.com
Acked-by: Koen Kooi k...@dominion.thruhere.net
---
arch/arm/boot/dts/am335x-boneblack.dts |1 +
1
From: Alexander Holler hol...@ahsoftware.de
This enables the use of MMC cards even when no card was inserted at boot.
Signed-off-by: Alexander Holler hol...@ahsoftware.de
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
Changes since v2:
None, again a simple repost
Changes since
The pinmux is specified in am335x-bone-common.dtsi to be reused by the eMMC
cape.
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
Changes since v2:
add missing pinmux entries
Changes since v1:
dropped the ti,non-removable entry per Sekhars request
arch/arm/boot/dts
-by: Koen Kooi k...@dominion.thruhere.net
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi
b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 80407ff..3057f30 100644
--- a/arch/arm/boot/dts/am335x-bone
eMMC node, see
http://marc.info/?l=linux-arm-kernelm=137889435710552w=2
---
Alexander Holler (1):
arm: bone: dts: add CD for mmc1
Koen Kooi (3):
am335x-boneblack: add eMMC DT entry
ARM: am335x-bone-common: switch mmc1 to 4-bit mode
ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers
The micro-SD slot hooks up all four data pins so lets' use them.
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi
b/arch/arm/boot/dts/am335x-bone
: add CD for mmc1
Koen Kooi (3):
am335x-boneblack: add eMMC DT entry
ARM: am335x-bone-common: switch mmc1 to 4-bit mode
ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers
arch/arm/boot/dts/am335x-bone-common.dtsi | 39 +++
arch/arm/boot/dts/am335x-bone.dts
From: Alexander Holler hol...@ahsoftware.de
This enables the use of MMC cards even when no card was inserted at boot.
Signed-off-by: Alexander Holler hol...@ahsoftware.de
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 14 ++
arch
-by: Koen Kooi k...@dominion.thruhere.net
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi
b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 303df81..adce9fe 100644
--- a/arch/arm/boot/dts/am335x-bone
The micro-SD slot hooks up all four data pins so lets' use them.
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi
b/arch/arm/boot/dts/am335x-bone
The pinmux is specified in am335x-bone-common.dtsi to be reused by the eMMC
cape.
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 22 ++
arch/arm/boot/dts/am335x-boneblack.dts| 14 ++
2 files changed, 36
Op 11 sep. 2013, om 08:00 heeft Joel Fernandes jo...@ti.com het volgende
geschreven:
On 09/11/2013 12:18 AM, Koen Kooi wrote:
Op 10 sep. 2013, om 22:14 heeft Joel Fernandes jo...@ti.com het volgende
geschreven:
On 09/10/2013 02:39 PM, Koen Kooi wrote:
Op 10 sep. 2013, om 21:24 heeft
: add CD for mmc1
+ b1bd98705a2da3d02f197d29ca040008ad8c662c am335x-boneblack: add eMMC DT entry
Also available as a git branch at
https://github.com/koenkooi/linux/commits/mainline
---
Alexander Holler (1):
arm: bone: dts: add CD for mmc1
Koen Kooi (1):
am335x-boneblack: add eMMC DT entry
From: Alexander Holler hol...@ahsoftware.de
This enables the use of MMC cards even when no card was inserted at boot.
Signed-off-by: Alexander Holler hol...@ahsoftware.de
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 14 ++
arch
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 7 +++
arch/arm/boot/dts/am335x-boneblack.dts| 15 +++
2 files changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi
b/arch/arm/boot/dts/am335x
Op 11 sep. 2013, om 12:06 heeft Sekhar Nori nsek...@ti.com het volgende
geschreven:
On Wednesday 11 September 2013 11:42 AM, Koen Kooi wrote:
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 7 +++
arch/arm/boot/dts/am335x
=137889435710552w=2
---
Alexander Holler (1):
arm: bone: dts: add CD for mmc1
Koen Kooi (1):
am335x-boneblack: add eMMC DT entry
arch/arm/boot/dts/am335x-bone-common.dtsi | 21 +
arch/arm/boot/dts/am335x-bone.dts | 4
arch/arm/boot/dts/am335x-boneblack.dts
From: Alexander Holler hol...@ahsoftware.de
This enables the use of MMC cards even when no card was inserted at boot.
Signed-off-by: Alexander Holler hol...@ahsoftware.de
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
Changes since v1:
None, simple repost
arch/arm/boot/dts
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
Changes since v1:
dropped the ti,non-removable entry per Sehkars request
arch/arm/boot/dts/am335x-bone-common.dtsi | 7 +++
arch/arm/boot/dts/am335x-boneblack.dts| 14 ++
2 files changed, 21 insertions(+)
diff
Op 10 sep. 2013, om 21:24 heeft Joel Fernandes jo...@ti.com het volgende
geschreven:
Here are last few patches required to add EDMA and MMC/SPI support for AM33xx.
Now that all dependent DMA patches and fixes are in linux next or mainline,
except
for [1] which should go in for 3.12 -rc
Op 10 sep. 2013, om 22:14 heeft Joel Fernandes jo...@ti.com het volgende
geschreven:
On 09/10/2013 02:39 PM, Koen Kooi wrote:
Op 10 sep. 2013, om 21:24 heeft Joel Fernandes jo...@ti.com het volgende
geschreven:
Here are last few patches required to add EDMA and MMC/SPI support
.
MMC support for AM335x still isn't in, so only the LDO change has been added.
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
Tested-by: Tom Rini tr...@ti.com
Tested-by: Matt Porter matt.por...@linaro.org
---
Changes since v3:
removed stray whitespace, spotted by Matt Porter
Op 9 sep. 2013, om 16:15 heeft Felipe Balbi ba...@ti.com het volgende
geschreven:
Hi,
On Mon, Sep 09, 2013 at 03:45:50PM +0200, Koen Kooi wrote:
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI
added,
so create a common dtsi both can use.
IMPORTANT: booting
support for AM335x still isn't in, so only the LDO change has been added.
Cc: sta...@vger.kernel.org
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
Tested-by: Tom Rini tr...@ti.com
Tested-by: Matt Porter matt.por...@linaro.org
---
Changes since v4:
attempting to correctly to the cc
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman khil...@linaro.org het volgende
geschreven:
Koen Kooi k...@dominion.thruhere.net writes:
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI
added,
so create a common dtsi both can use.
IMPORTANT: booting the existing
Op 9 sep. 2013, om 20:27 heeft Joel Fernandes jo...@ti.com het volgende
geschreven:
On 09/09/2013 10:51 AM, Koen Kooi wrote:
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman khil...@linaro.org het
volgende geschreven:
Koen Kooi k...@dominion.thruhere.net writes:
The BeagleBone Black
Op 9 sep. 2013, om 21:50 heeft Joel Fernandes jo...@ti.com het volgende
geschreven:
On 09/09/2013 01:51 PM, Joel Fernandes wrote:
On 09/09/2013 01:43 PM, Koen Kooi wrote:
Op 9 sep. 2013, om 20:27 heeft Joel Fernandes jo...@ti.com het volgende
geschreven:
On 09/09/2013 10:51 AM, Koen
Op 10 sep. 2013, om 01:42 heeft Joel Fernandes jo...@ti.com het volgende
geschreven:
On 09/09/2013 03:12 PM, Joel Fernandes wrote:
On 09/09/2013 03:00 PM, Koen Kooi wrote:
Op 9 sep. 2013, om 21:50 heeft Joel Fernandes jo...@ti.com het volgende
geschreven:
On 09/09/2013 01:51 PM, Joel
.
MMC support for AM335x still isn't in, so only the LDO change has been added.
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
Changes since 2:
Updated commit message to point out that the existing DT will damage
the board.
Changes since v1:
Added the Makefile entry
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added,
so create a common dtsi both can use. MMC support for AM335x still isn't in, so
only the LDO change has been added.
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
.../{am335x-bone.dts = am335x-bone
Op 6 sep. 2013, om 08:57 heeft George Cherian george.cher...@ti.com het
volgende geschreven:
On 9/6/2013 12:03 PM, Koen Kooi wrote:
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI
added,
so create a common dtsi both can use. MMC support for AM335x still isn't
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added,
so create a common dtsi both can use. MMC support for AM335x still isn't in, so
only the LDO change has been added.
Signed-off-by: Koen Kooi k...@dominion.thruhere.net
---
Changes since v1:
Added
Op 6 sep. 2013, om 09:10 heeft Koen Kooi k...@dominion.thruhere.net het
volgende geschreven:
Op 6 sep. 2013, om 08:57 heeft George Cherian george.cher...@ti.com het
volgende geschreven:
On 9/6/2013 12:03 PM, Koen Kooi wrote:
The BeagleBone Black is basically a regular BeagleBone
Op 6 sep. 2013, om 10:51 heeft Koen Kooi k...@dominion.thruhere.net het
volgende geschreven:
Op 6 sep. 2013, om 09:10 heeft Koen Kooi k...@dominion.thruhere.net het
volgende geschreven:
Op 6 sep. 2013, om 08:57 heeft George Cherian george.cher...@ti.com het
volgende geschreven
-by: Mark Jackson mpfj-l...@newflow.co.uk
Tested-by: Koen Kooi k...@dominion.thruhere.net
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Op 26 apr. 2013, om 05:52 heeft Tony Lindgren t...@atomide.com het volgende
geschreven:
Without WLAN we cannot switch omap4 to use device tree
only booting. This patch can be reverted when the
binding for wl12xx is added.
How much boards am I allowed to add to this? I need to get the wl12xx
Op 3 apr. 2013, om 15:09 heeft Felipe Balbi ba...@ti.com het volgende
geschreven:
Hi,
On Wed, Apr 03, 2013 at 02:43:00PM +0200, Daniel Mack wrote:
On 03.04.2013 14:04, Felipe Balbi wrote:
On Wed, Apr 03, 2013 at 02:00:23PM +0200, Daniel Mack wrote:
Felipe, could you explain the
Op 12 mrt. 2013, om 16:35 heeft Mark Jackson mpfj-l...@mimc.co.uk het
volgende geschreven:
I'm just fighting an issue with ethernet on our custom AM335x board:-
# uname -a
Linux nanobone 3.9.0-rc2-00113-gd60f039 #139 Tue Mar 12 15:14:01 GMT 2013
armv7l GNU/Linux
Every now and then,
On Fri, 2013-03-01 at 22:57 +0100, Daniel Mack wrote:
Hi Afzal, everyone,
On 03.11.2012 08:33, Mohammed, Afzal wrote:
* Daniel Mack, November 03, 2012 1:06 AM:
I'm testing these patches with an AM33xx board that has the first musb
port wired to an USB type A plug, but it doesn't yet
Op 24 jan. 2013, om 04:45 heeft Patil, Rachna rac...@ti.com het volgende
geschreven:
From: Patil, Rachna rac...@ti.com
Make changes to add DT support in the MFD core driver.
Signed-off-by: Patil, Rachna rac...@ti.com
---
Changes in v4:
Non-standard properties prefixed with
Op 30 jan. 2013, om 20:56 heeft Mugunthan V N mugunthan...@ti.com het
volgende geschreven:
CPDMA interrupts are not properly acknowledged which leads to interrupt
storm, only cpdma interrupt 0 is acknowledged in Davinci CPDMA driver.
Changed cpdma_ctlr_eoi api to acknowledge 1 and 2
Op 30 jan. 2013, om 15:39 heeft Hebbar Gururaja gururaja.heb...@ti.com het
volgende geschreven:
am33xx_cm_wait_module_ready() checks if register offset is NULL.
int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
{
int i = 0;
if (!clkctrl_offs)
Op 22 jan. 2013, om 10:58 heeft Kishon Vijay Abraham I kis...@ti.com het
volgende geschreven:
This patch series adds support for adding multiple PHY's (of same type).
The binding information has to be present in the PHY library (otg.c) in
order for it to return the appropriate PHY whenever
Op 22 jan. 2013, om 17:16 heeft kishon kis...@ti.com het volgende geschreven:
Hi,
On Tuesday 22 January 2013 09:15 PM, kishon wrote:
On Tuesday 22 January 2013 09:11 PM, Koen Kooi wrote:
Op 22 jan. 2013, om 10:58 heeft Kishon Vijay Abraham I kis...@ti.com
het volgende geschreven
Op 22 jan. 2013, om 17:51 heeft Afzal Mohammed af...@ti.com het volgende
geschreven:
Hi,
This series adds DT support to da8xx-fb driver (device found on
DaVinci and AM335x SoC's). It does certain cleanup's in the process.
This series as compared to previous version handles configuration
to
pick a display mode with too high memory bandwidth, and other
small cleanups
Signed-off-by: Rob Clark robdcl...@gmail.com
Tested on a beaglebone and beaglebone-black:
Tested-by: Koen Kooi k...@dominion.thruhere.net--
To unsubscribe from this list: send the line unsubscribe linux-omap
Op 22 jan. 2013, om 23:36 heeft Rob Clark robdcl...@gmail.com het volgende
geschreven:
Driver for the NXP TDA998X i2c hdmi encoder slave.
v1: original
v2: fix npix/nline programming
Signed-off-by: Rob Clark robdcl...@gmail.com
Tested on a beaglebone-black:
Tested-by: Koen Kooi k
Op 14 dec. 2012, om 08:13 heeft Richard Cochran richardcoch...@gmail.com het
volgende geschreven:
On Thu, Dec 13, 2012 at 01:36:41PM -0800, Tony Lindgren wrote:
Commit 87c0e764 (cpts: introduce time stamping code and a PTP hardware clock)
mistakenly included plat/clock.h that should not be
Op 10 nov. 2012, om 00:40 heeft Grant Likely grant.lik...@secretlab.ca het
volgende geschreven:
On Fri, Nov 9, 2012 at 11:23 PM, Stephen Warren swar...@wwwdotorg.org wrote:
On 11/09/2012 09:28 AM, Grant Likely wrote:
On Tue, Nov 6, 2012 at 10:37 PM, Stephen Warren swar...@wwwdotorg.org
Op 5 nov. 2012, om 21:40 heeft Grant Likely grant.lik...@secretlab.ca het
volgende geschreven:
Hey folks,
As promised, here is my early draft to try and capture what device
tree overlays need to do and how to get there. Comments and
suggestions greatly appreciated.
Device Tree Overlay
Op 7 nov. 2012, om 23:35 heeft Ryan Mallon rmal...@gmail.com het volgende
geschreven:
On 06/11/12 08:40, Tabi Timur-B04825 wrote:
On Mon, Nov 5, 2012 at 2:40 PM, Grant Likely grant.lik...@secretlab.ca
wrote:
Jane is building custom BeagleBone expansion boards called 'capes'. She
can
Op 2 nov. 2012, om 10:26 heeft Cousson, Benoit b-cous...@ti.com het
volgende geschreven:
Hi Jason,
On 11/1/2012 7:50 PM, Jason Kridner wrote:
My apologies for starting a new thread, but I don't have this thread
in my Inbox.
http://www.spinics.net/lists/linux-omap/msg81034.html
Tony
Op 2 nov. 2012, om 10:42 heeft Russ Dill russ.d...@ti.com het volgende
geschreven:
On Fri, Nov 2, 2012 at 1:57 AM, Felipe Balbi ba...@ti.com wrote:
Hi,
On Thu, Nov 01, 2012 at 04:49:23PM -0700, Russ Dill wrote:
On Thu, Nov 1, 2012 at 3:05 PM, Felipe Balbi ba...@ti.com wrote:
HI,
On
tl;dr: please suggest an actual solution that allows plugplay when plugging in
multiple capes and applying power after that. Preferably one that doesn't pass
the buck to u-boot.
Op 1 nov. 2012, om 12:26 heeft Cousson, Benoit b-cous...@ti.com het
volgende geschreven:
Hi Panto,
On 11/1/2012
Op 1 nov. 2012, om 14:06 heeft Felipe Balbi ba...@ti.com het volgende
geschreven:
Hi,
On Thu, Nov 01, 2012 at 01:00:21PM +0100, Koen Kooi wrote:
tl;dr: please suggest an actual solution that allows plugplay when
plugging in multiple capes and applying power after that. Preferably
one
Op 18 okt. 2012, om 05:06 heeft Richard Cochran richardcoch...@gmail.com het
volgende geschreven:
On Wed, Oct 17, 2012 at 04:50:46PM -0700, Tony Lindgren wrote:
* Paul Walmsley p...@pwsan.com [121017 16:39]:
Hi Richard
On Wed, 17 Oct 2012, Richard Cochran wrote:
Would you please take
Hi,
I'm currently building 3.7rc1 kernels meant to run on beagleboards (omap3),
pandaboards (omap4) and beaglebones (am335x). At the moment I'm only testing it
on beaglebone and I noticed a problem with the different cpufreq drivers
getting in eachothers way.
I patched in cpufreq-cpu0 support
Op 26 sep. 2012, om 13:37 heeft Hebbar, Gururaja gururaja.heb...@ti.com het
volgende geschreven:
On Wed, Sep 12, 2012 at 17:32:38, Hebbar, Gururaja wrote:
On Wed, Sep 12, 2012 at 14:19:51, S, Venkatraman wrote:
On Tue, Sep 4, 2012 at 6:39 PM, Hebbar, Gururaja gururaja.heb...@ti.com
wrote:
Hi,
With a patched 3.6rc7 on my beaglebone I can set the pinmux for pins using
pinctrl and that seems to work. On the 3.2 vendor tree there was the omap_mux
driver with an awesome debugfs interface:
# cat /sys/kernel/debug/omap_mux/lcd_data0
name: lcd_data0.ehrpwm2A (0x44e108a0/0x8a0 =
Op 26 sep. 2012, om 18:15 heeft Matt Porter mpor...@ti.com het volgende
geschreven:
On Wed, Sep 26, 2012 at 03:03:27PM +0200, Linus Walleij wrote:
On Wed, Sep 26, 2012 at 2:56 PM, Matt Porter mpor...@ti.com wrote:
Adding Linus W. and lkml.
On Wed, Sep 26, 2012 at 01:46:45PM +0200, Koen Kooi
Op 26 sep. 2012, om 20:52 heeft Tony Lindgren t...@atomide.com het volgende
geschreven:
* Koen Kooi k...@dominion.thruhere.net [120926 10:23]:
Op 26 sep. 2012, om 18:15 heeft Matt Porter mpor...@ti.com het volgende
geschreven:
On Wed, Sep 26, 2012 at 03:03:27PM +0200, Linus Walleij
-by: AnilKumar Ch anilku...@ti.com
Acked-by: Koen Kooi k...@dominion.thruhere.net
---
arch/arm/boot/dts/am335x-bone.dts | 43 +
1 file changed, 43 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone.dts
b/arch/arm/boot/dts/am335x-bone.dts
index c634f87
Op 28 aug. 2012, om 07:34 heeft AnilKumar, Chimata anilku...@ti.com het
volgende geschreven:
Hi Koen,
On Fri, Aug 24, 2012 at 13:32:17, Koen Kooi wrote:
Op 24 aug. 2012, om 09:56 heeft Koen Kooi k...@dominion.thruhere.net het
volgende geschreven:
Op 24 aug. 2012, om 09:26 heeft
Op 5 sep. 2012, om 16:24 heeft Matt Porter mpor...@ti.com het volgende
geschreven:
On Wed, Sep 05, 2012 at 03:29:30PM +0200, Koen Kooi wrote:
Op 28 aug. 2012, om 07:34 heeft AnilKumar, Chimata anilku...@ti.com het
volgende geschreven:
Hi Koen,
On Fri, Aug 24, 2012 at 13:32:17, Koen
Op 1 sep. 2012 om 09:01 heeft AnilKumar, Chimata anilku...@ti.com het
volgende geschreven:
Hi Koen,
On Fri, Aug 31, 2012 at 21:23:18, Koen Kooi wrote:
Op 30 aug. 2012, om 22:35 heeft Tony Lindgren t...@atomide.com het
volgende geschreven:
* AnilKumar Ch anilku...@ti.com [120828 01
Op 30 aug. 2012, om 22:35 heeft Tony Lindgren t...@atomide.com het volgende
geschreven:
* AnilKumar Ch anilku...@ti.com [120828 01:11]:
Adds GPIO pinctrl nodes to am3358_pinmux master node to control
user leds (USR0, USR1, USR2 and USR3) present on BeagleBone.
Signed-off-by: AnilKumar Ch
Op 24 aug. 2012, om 07:50 heeft AnilKumar, Chimata anilku...@ti.com het
volgende geschreven:
Hi Koen,
On Thu, Aug 23, 2012 at 19:43:48, Koen Kooi wrote:
Op 21 aug. 2012, om 13:17 heeft AnilKumar Ch anilku...@ti.com het volgende
geschreven:
Add tps65217 regulator device tree data
Op 24 aug. 2012, om 09:26 heeft AnilKumar, Chimata anilku...@ti.com het
volgende geschreven:
Hi Koen,
On Fri, Aug 24, 2012 at 11:58:34, Koen Kooi wrote:
Op 24 aug. 2012, om 07:50 heeft AnilKumar, Chimata anilku...@ti.com het
volgende geschreven:
Hi Koen,
On Thu, Aug 23, 2012
Op 24 aug. 2012, om 09:56 heeft Koen Kooi k...@dominion.thruhere.net het
volgende geschreven:
Op 24 aug. 2012, om 09:26 heeft AnilKumar, Chimata anilku...@ti.com het
volgende geschreven:
Hi Koen,
On Fri, Aug 24, 2012 at 11:58:34, Koen Kooi wrote:
Op 24 aug. 2012, om 07:50 heeft
data
Signed-off-by: Matthias Kaehlcke matth...@kaehlcke.net
Work beautifully on a beaglebone + 3 LCD cape, although there's no FB driver
yet:
Tested-by: Koen Kooi k...@dominion.thruhere.net--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord
Op 21 aug. 2012, om 13:17 heeft AnilKumar Ch anilku...@ti.com het volgende
geschreven:
Add tps65217 regulator device tree data to AM335x-Bone by adding
regulator consumers with tightened constraints and regulator-name.
TPS65217 regulator handle can be obtained by using this regulator
name.
Op 3 aug. 2012, om 14:38 heeft Sourav Poddar sourav.pod...@ti.com het
volgende geschreven:
Add keypad data node in omap5 device tree file.
Also fill the device tree binding parameters
with the required value in omap5-evm dts file.
Tested on omap5430 evm with 3.5 custom kernel.
Cc:
Op 7 aug. 2012, om 17:53 heeft Hiremath, Vaibhav hvaib...@ti.com het
volgende geschreven:
On Tue, Aug 07, 2012 at 20:49:48, Rob Herring wrote:
On 08/07/2012 08:37 AM, Vaibhav Hiremath wrote:
If the module requires only one clocksource to function, then
driver can very well call clk_get()
Op 3 aug. 2012, om 09:16 heeft Daniel Mack zon...@gmail.com het volgende
geschreven:
On 30.03.2012 15:27, Santosh Shilimkar wrote:
For coupled cpuidle to work when both cpus are active, it needs a global
timer
that can handle events for both cpus. This timer is used as the broadcast
Op 3 aug. 2012, om 09:21 heeft Koen Kooi k...@dominion.thruhere.net het
volgende geschreven:
Op 3 aug. 2012, om 09:16 heeft Daniel Mack zon...@gmail.com het volgende
geschreven:
On 30.03.2012 15:27, Santosh Shilimkar wrote:
For coupled cpuidle to work when both cpus are active
Op 3 aug. 2012, om 11:27 heeft Shilimkar, Santosh santosh.shilim...@ti.com
het volgende geschreven:
On Fri, Aug 3, 2012 at 2:00 PM, Koen Kooi k...@dominion.thruhere.net wrote:
Op 3 aug. 2012, om 09:21 heeft Koen Kooi k...@dominion.thruhere.net het
volgende geschreven:
Op 3 aug. 2012
Op 3 aug. 2012, om 11:42 heeft Hiremath, Vaibhav hvaib...@ti.com het
volgende geschreven:
On Fri, Aug 03, 2012 at 15:03:07, Koen Kooi wrote:
Op 3 aug. 2012, om 11:27 heeft Shilimkar, Santosh
santosh.shilim...@ti.com het volgende geschreven:
On Fri, Aug 3, 2012 at 2:00 PM, Koen Kooi k
Op 3 aug. 2012, om 13:41 heeft Daniel Mack zon...@gmail.com het volgende
geschreven:
On 03.08.2012 11:07, Hiremath, Vaibhav wrote:
I have just pushed the code (V7 which Ravi submitted), so can you please try
with below branch?
Op 3 aug. 2012, om 14:38 heeft Sourav Poddar sourav.pod...@ti.com het
volgende geschreven:
Add keypad data node in omap5 device tree file.
Also fill the device tree binding parameters
with the required value in omap5-evm dts file.
Tested on omap5430 evm with 3.5 custom kernel.
Cc:
Op 3 aug. 2012, om 17:48 heeft Hiremath, Vaibhav hvaib...@ti.com het
volgende geschreven:
On Fri, Aug 03, 2012 at 17:11:38, Daniel Mack wrote:
On 03.08.2012 11:07, Hiremath, Vaibhav wrote:
I have just pushed the code (V7 which Ravi submitted), so can you please
try
with below branch?
Op 2 aug. 2012, om 17:30 heeft Daniel Mack zon...@gmail.com het volgende
geschreven:
On 31.07.2012 21:29, Koen Kooi wrote:
2/3 of the way there:
http://patchwork.ozlabs.org/patch/174085/
http://patchwork.ozlabs.org/patch/174086/
I keep failing to create a .dts that doesn't upset
Op 2 aug. 2012, om 21:56 heeft Daniel Mack zon...@gmail.com het volgende
geschreven:
On 02.08.2012 17:37, Koen Kooi wrote:
But I still can't get it working:
root@beaglebone:~# dmesg | grep -i cpsw [ 13.504425] net eth0:
initializing cpsw version 1.12 (0)
root@beaglebone:~# dmesg
Op 26 jul. 2012, om 19:46 heeft Daniel Mack zon...@gmail.com het volgende
geschreven:
On 26.07.2012 18:09, Koen Kooi wrote:
Op 26 jul. 2012, om 17:58 heeft Daniel Mack zon...@gmail.com het
volgende geschreven:
On 26.07.2012 17:00, Koen Kooi wrote:
With Ajay's usb patches you can
Op 25 jul. 2012, om 14:23 heeft AnilKumar Ch anilku...@ti.com het volgende
geschreven:
Add Bosch D_CAN controller device tree data to AM33XX dtsi file
by adding d_can device node with all the necessary parameters.
Signed-off-by: AnilKumar Ch anilku...@ti.com
---
Op 26 jul. 2012, om 11:03 heeft AnilKumar, Chimata anilku...@ti.com het
volgende geschreven:
On Thu, Jul 26, 2012 at 14:16:33, Koen Kooi wrote:
Op 25 jul. 2012, om 14:23 heeft AnilKumar Ch anilku...@ti.com het volgende
geschreven:
Add Bosch D_CAN controller device tree data to AM33XX
Op 26 jul. 2012, om 16:52 heeft Daniel Mack zon...@gmail.com het volgende
geschreven:
On 23.07.2012 18:36, N, Mugunthan V wrote:
On 05.07.2012 19:45, N, Mugunthan V wrote:
I am working on DT support for cpsw and will be submitting the patch by
July 20, 2012
Just curious - have you made
Op 26 jul. 2012, om 17:58 heeft Daniel Mack zon...@gmail.com het volgende
geschreven:
On 26.07.2012 17:00, Koen Kooi wrote:
With Ajay's usb patches you can easily boot from a usb stick, you'll
only need the bootloads to be on mmc or tftp. That's what I have been
doing on my beaglebone
Op 21 mei 2012, om 11:41 heeft Tomi Valkeinen het volgende geschreven:
Commit e813a55eb9c9bc6c8039fb16332cf43402125b30 (OMAP: board-files:
remove custom PD GPIO handling for DVI output) moved TFP410 chip's
powerdown-gpio handling from the board files to the tfp410 driver. One
Op 21 mei 2012, om 13:12 heeft Tomi Valkeinen het volgende geschreven:
On Mon, 2012-05-21 at 12:59 +0200, Koen Kooi wrote:
Op 21 mei 2012, om 11:41 heeft Tomi Valkeinen het volgende geschreven:
Commit e813a55eb9c9bc6c8039fb16332cf43402125b30 (OMAP: board-files:
remove custom PD GPIO
Op 9 mei 2012, om 02:39 heeft Woodruff, Richard het volgende geschreven:
From: Hilman, Kevin
Sent: Tuesday, May 08, 2012 5:17 PM
A basic OMAP AVS driver has been in mainline for a long time, yet we
have not seen support submitted for all of these features.
1.5/3.5 is a feature.
ABB
Op 2 mei 2012, om 10:47 heeft Russ Dill het volgende geschreven:
[0.198272] omap-mcbsp.3: alias fck already exists
[3.461212] clock: dpll1_ck failed transition to 'locked'
What's happening in those 3.3 seconds?
regards,
Koen
--
To unsubscribe from this list: send the line
Op 2 mei 2012, om 12:38 heeft Raja, Govindraj het volgende geschreven:
On Wed, May 2, 2012 at 2:17 PM, Russ Dill russ.d...@ti.com wrote:
On Mon, Mar 19, 2012 at 6:34 AM, Raja, Govindraj govindraj.r...@ti.com
wrote:
On Mon, Mar 19, 2012 at 12:12 PM, Keshava Munegowda
keshava_mgo...@ti.com
Op 30 apr. 2012, om 11:07 heeft Jean Pihet het volgende geschreven:
Kevin,
On Fri, Apr 27, 2012 at 1:29 AM, Kevin Hilman khil...@ti.com wrote:
The 3505 check is now unused and can be removed.
There are no longer any cpu_is_* checks that depend on specific IP
detection.
Acked-by:
Op 22 mrt. 2012, om 06:19 heeft Russ Dill het volgende geschreven:
Signed-off-by: Russ Dill russ.d...@ti.com
---
arch/arm/mach-omap2/board-ldp.c |7 +++
arch/arm/mach-omap2/board-omap3evm.c |9 +
Is that evm hunk intentional?
regards,
Koen
2 files changed, 16
Op 22 mrt. 2012, om 06:19 heeft Russ Dill het volgende geschreven:
Signed-off-by: Russ Dill russ.d...@ti.com
---
arch/arm/mach-omap2/board-omap3evm.c | 15 ++-
1 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c
Hi,
I have a freshly built beagleboard xM on my desk which is giving me some
trouble:
xM revision A:
[0.00] OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
new xM revision C:
[0.00] OMAP3630 ES1.2 (l2cache neon isp 192mhz_clk )
So the IVA and SGX aren't getting detected,
1 - 100 of 378 matches
Mail list logo