From: Roger Quadros <rog...@ti.com>
Provide the RESET regulators for the USB PHYs, the USB Host
port modes and the PHY devices.
Also provide pin multiplexer information for the USB host
pins.
Cc: Roger Quadros <rog...@ti.com>
Signed-off-by: Roger Quadros <rog...@ti.com>
[Sricharan R <r.sricha...@ti.com>: Replaced constants with preprocessor macros]
Signed-off-by: Sricharan R <r.sricha...@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 70 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap5.dtsi | 30 ++++++++++++++++
2 files changed, 100 insertions(+)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 843a001..a31e42f 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -25,6 +25,40 @@
regulator-max-microvolt = <3000000>;
};
+ /* HS USB Port 2 RESET */
+ hsusb2_reset: hsusb2_reset_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_reset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2_phy {
+ compatible = "usb-nop-xceiv";
+ reset-supply = <&hsusb2_reset>;
+ };
+
+ /* HS USB Port 3 RESET */
+ hsusb3_reset: hsusb3_reset_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb3_reset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* HS USB Host PHY on PORT 3 */
+ hsusb3_phy: hsusb3_phy {
+ compatible = "usb-nop-xceiv";
+ reset-supply = <&hsusb3_reset>;
+ };
+
};
&omap5_pmx_core {
@@ -35,6 +69,7 @@
&dmic_pins
&mcbsp1_pins
&mcbsp2_pins
+ &usbhost_pins
>;
twl6040_pins: pinmux_twl6040_pins {
@@ -120,6 +155,32 @@
0x16c (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */
>;
};
+
+ usbhost_pins: pinmux_usbhost_pins {
+ pinctrl-single,pins = <
+ 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+ 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+ 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+ 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+ 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+ 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+ >;
+ };
+};
+
+&omap5_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &usbhost_wkup_pins
+ >;
+
+ usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
+ pinctrl-single,pins = <
+ 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub
clk */
+ >;
+ };
};
&mmc1 {
@@ -164,6 +225,15 @@
status = "disabled";
};
+&usbhshost {
+ port2-mode = "ehci-hsic";
+ port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
&mcspi1 {
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 1e84db8..accab62 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -666,5 +666,35 @@
ctrl-module = <&omap_control_usb>;
};
};
+
+ usbhstll: usbhstll@4a062000 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x4a062000 0x1000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "usb_tll_hs";
+ };
+
+ usbhshost: usbhshost@4a064000 {
+ compatible = "ti,usbhs-host";
+ reg = <0x4a064000 0x800>;
+ ti,hwmods = "usb_host_hs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbhsohci: ohci@4a064800 {
+ compatible = "ti,ohci-omap3", "usb-ohci";
+ reg = <0x4a064800 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usbhsehci: ehci@4a064c00 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x4a064c00 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
