On Sunday 01 February 2015 02:36:06 Matthijs van Duin wrote:
On 31 January 2015 at 20:06, Pali Rohár pali.ro...@gmail.com
wrote:
I have configured two testing N900 devices. One with signed
bootloader which enable omap aes support and one device with
signed bootloader which does not enable
On Sat, Jan 31, 2015 at 7:41 AM, Ohad Ben-Cohen o...@wizery.com wrote:
On Sat, Jan 31, 2015 at 1:29 AM, Bjorn Andersson bj...@kryo.se wrote:
In a system where you have two hwlock blocks lckA and lckB, each
consisting of 8 locks and you have dspB that can only access lckB
This is a good
Hello,
On Sunday 01 February 2015 10:47:02 Pavel Machek wrote:
Hi!
I connected N900 with full battery using USB. For some reason,
charge limit was set to 100mA, battery was full and was
discharging:
Make sure you have loaded some usb gadget. Without it battery
charging via dedicated
Hi!
I connected N900 with full battery using USB. For some reason, charge
limit was set to 100mA, battery was full and was discharging:
root@n900:/my/tui/ofone# ./tefone
Ready.
Battery 4.017 V 4.039 V 81 % 0 % 0 / 0 / 2056 mAh Full -242.224 / 550 /
100 mA
I adjusted the current limit,
Hi!
On Sun 2015-02-01 11:08:16, Pali Rohár wrote:
On Sunday 01 February 2015 10:47:02 Pavel Machek wrote:
Hi!
I connected N900 with full battery using USB. For some reason,
charge limit was set to 100mA, battery was full and was
discharging:
Make sure you have loaded some usb
On Sun 2015-02-01 12:38:13, Pavel Machek wrote:
Hi!
On Sun 2015-02-01 11:08:16, Pali Rohár wrote:
On Sunday 01 February 2015 10:47:02 Pavel Machek wrote:
Hi!
I connected N900 with full battery using USB. For some reason,
charge limit was set to 100mA, battery was full and was
On Fri, Jan 30, 2015 at 9:41 PM, Ohad Ben-Cohen o...@wizery.com wrote:
On Sat, Jan 31, 2015 at 1:29 AM, Bjorn Andersson bj...@kryo.se wrote:
In a system where you have two hwlock blocks lckA and lckB, each
consisting of 8 locks and you have dspB that can only access lckB
This is a good
On Sun 2015-02-01 10:47:02, Pavel Machek wrote:
Hi!
I connected N900 with full battery using USB. For some reason, charge
limit was set to 100mA, battery was full and was discharging:
root@n900:/my/tui/ofone# ./tefone
Ready.
Battery 4.017 V 4.039 V 81 % 0 % 0 / 0 / 2056 mAh Full
Quoting Tony Lindgren (2015-01-30 17:04:44)
Hi all,
Looks like commit cb75a8fcd14e (clk: Add rate constraints to clocks)
causes a regression on at least omaps where the serial console either
does not show anything, or just prints garbage.
Reverting cb75a8fcd14e makes things work again on
Quoting Tomeu Vizoso (2015-01-31 10:36:22)
On 31 January 2015 at 02:31, Stephen Boyd sb...@codeaurora.org wrote:
On 01/29, Stephen Boyd wrote:
On 01/29/15 05:31, Geert Uytterhoeven wrote:
Hi Tomeu, Mike,
On Fri, Jan 23, 2015 at 12:03 PM, Tomeu Vizoso
tomeu.viz...@collabora.com
Quoting Tomeu Vizoso (2015-01-23 03:03:30)
Moves clock state to struct clk_core, but takes care to change as little API
as
possible.
struct clk_hw still has a pointer to a struct clk, which is the
implementation's per-user clk instance, for backwards compatibility.
The struct clk that
On 01/30/2015 06:02 PM, Jyri Sarha wrote:
Disables GPIO support and LINE2 input and renames Mic3 input to Mic2,
if tlv320aic3104 mode is seleced. Devicetree binding document is
updated accordingly.
Signed-off-by: Jyri Sarha jsa...@ti.com
---
.../devicetree/bindings/sound/tlv320aic3x.txt
Hi Roger,
On 01/30/2015 11:05 PM, Roger Quadros wrote:
Hi,
On 30/01/15 13:04, Roger Quadros wrote:
Felipe Chanwoo,
On 26/01/15 14:15, Roger Quadros wrote:
The recommended name for USB-Host cable state is USB-Host and not
USB-HOST as per drivers/extcon/extcon-class.c extcon_cable_name.
Hi Roger,
On 01/30/2015 11:03 PM, Roger Quadros wrote:
On 30/01/15 02:11, Chanwoo Choi wrote:
Hi Roger,
On 01/28/2015 09:15 PM, Roger Quadros wrote:
This driver observes the USB ID pin connected over a GPIO and
updates the USB cable extcon states accordingly.
The existing GPIO extcon
14 matches
Mail list logo
